• KSBB Journal
• /
• 제4권1호
• /
• pp.21-30
• /
• 1989

Lauryl alcohol was used as extracting solvent of ethanol, and its toxicity on the free cells or immobilized cells was tested. To increase ethanol productivity, extractive fermentation method combined with ethanol fermentation and ethanol recovery was applied to the immobilized batch and continuous fermenter. As the concentration of LaOH was increased, the lag phase became longer, but specific growth rate did not change greatly. And a cell entrapment technique could protect the yeast cells against both substrate inhibition and solvent toxicity. When the glucose concentration was 400 g/l and the LaOH/fermentation medium ratio was 4, total ethanol productivity increased with the enhancement of LaOH volume, and maximum productivity was 2.75 g/l.hr in the immobilized batch fermentation.

• Analytical Science and Technology
• /
• 제5권4호
• /
• pp.425-431
• /
• 1992

The concentration and determination of trace phosphate ion was studied by $La(OH)_3$ coprecipitaiton. Phosphate ions in 1.0L samples were coprecipitated with lanthanium hydroxide at pH 9.5 adjusted with ammonia solution. The precipitates were floated with the aid of mixed surfactant(1:8 sodium oleate/sodium dodecyl sulfate) and nitrogen gas bubbles. The floated precipitate was collected in suction flask from the solution. The precipitate were washed with dil. ammonia solution and dissolved in sulfuric acid. The phosphate ion in the concentrated solution was finally determinated by UV/VIS spectrophotometry using the molybdenium blue method. The proposed method could be applied to the determination of phosphate ion in tap water and river water.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2006년도 춘계학술발표대회 및 제10회 신소재 심포지엄 논문개요집
• /
• pp.29.2-29.2
• /
• 2006

• Journal of the Korean Chemical Society
• /
• 제36권5호
• /
• pp.692-696
• /
• 1992

$NH_4^+ form cation exchange resin was used to separate one rare earth element from the rare earth mixture solution using Ln-EDTA eluent. Rare earth mixture solution was passed through the resin bed and eluted with 0.1M La-EDTA solution as an eluent. In here all the rare earth element except lanthanum ion are eluted and lanthanum ion absorbed in resin bed is eluted using 0.1M EDTA solution. If Ce-EDTA solution instead of La-EDTA solution was used as an eluent, all the rare earth element except cerium ion are eluted and cerium ion is eluted with 0.1M EDTA solution. This method can be applied to separate the individual rare earth element from the mixture. The separation mechanism is as follows: Absorption : 3RNH_4 ＋ Ln^{3+} = R_3Ln ＋ 3NH_4^+, La-EDTA elution : R_3Ln ＋ La-Y- = R_3La ＋ Ln-Y-, EDTA elution : R_3La ＋ HY^3- = La_-Y ＋ RH ＋ 2R^-.$

• Korean Journal of Materials Research
• /
• 제14권4호
• /
• pp.270-275
• /
• 2004

Due to the luminescence by$ Er ^{ 3+}$ activator, Er-doped $LaPO_4$ powders can be applied for optical amplification materials. In this study, $LaPO_4$:Er nanoparticles were synthesized in solution system using a high-boiling coordinating solvent and their properties were investigated through various spectroscopic techniques. The nanoparticles were to take a single phase of monazite structure by a X-ray diffraction analysis and to have the 5-6 nm of particles size with narrow size distribution by a TEM. And it was confirmed by the EA and FT-IR analyses that the surfaces of nanoparticles are coordinated with the solvent molecules, which will possibly keep from agglomerating between LaPO$_4$:Er nanoparticles. In the emission spectrum of $LaPO_4$:Er nanoparticle at NIR region, on the other hand, it was measured that the emission intensity is very weak, which is due to the transition from $^4$$I_{(13/2)}$ to $^4$$I_{(15/2)}$ of $Er^{3+ }$ion. It was interpreted that the weak luminescence of $LaPO_4$:Er is originated from the hydroxyl groups adsorbed on the surfaces of the nanoparticles, because OH group acts as an efficient quencher for the $^4$$I_{(13/2)}$ \longrightarrow $^4$$I_{(15/2)}$ emission of $Er^{3+}$ activator. But the co-doping of Yb$^{3+}$ as a sensitizer in this nanoparticle results in the increase of the emission intensity at 1539 nm due to the effective energy transfer from $Yb^{3+}$ to $Er^{3+}$ . In addition, the synthesized nanoparticles exhibited good dispersibility with some polymers and effective luminescence at NIR region.n.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제13권2호
• /
• pp.135-141
• /
• 2005

Nitric oxide(NO) reduction by methanol was investigated over $La_2O_3$ catalysts in the presence and absence of oxygen. In the absence of $O_2$, $CH_3OH$ reduced NO to both $N_2$ and $N_2O$, with selectivity to $N_2$ formation decreasing from 81-88% at 623K to 47-71% at 723 K. With 1.2% $O_2$ in the feed, the rates were 4-8 times higher, but the selectivity to $N_2$ dropped from 50% at 623 K to 9% at 723 K. The specific activities with $La_2O_3$ for this reaction were higher than those for other reductants; for example, at 773 K with hydrogen a specific activity of $34\;{\mu}mol\;NO/sec{\cdot}m^2$ was obtained whereas that for methanol was $638\;{\mu}mol\;NO/sec{\cdot}m^2$. The Arrhenius plots were linear under differential reaction conditions, and the apparant activation energy was consistantly near 15 kcal/mol with $CH_3OH$. Linear partial pressure dependencies based on a power rate law were obtained and showed a near-zero order in $CH_3OH$ and a near-first order in $H_2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.31-33
• /
• 1992

This paper is studies the addition effects of $La_2O_3$ on the magnetic properties of Sr ferrite. Compositions were chosen according to the formula $[SrO{\cdot}nFe_2O_3]_{100-x}(La_2O_3)_x$. where n was varied between 5.8~6.1 and x between 0~3. The composition of the best value $(BH)_{max}$=1.48MGOe was n=6(stoichiometric composition) and x=2 at $La_2O_3$ addition. This value was higher than that of ordinary isotropic strontium ferrite.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.232-233
• /
• 2007

We manufactured Liquid Crystal Polymer (LCP) and (1-x)CaTiO3-xLaAlO3 (CT-LA) ceramic composites and investigated dielectric properties to use as embedded capacitor in printed circuit boards and replace LTCC substrate. The dielectric properties of these composites are varied with volume fraction of CT-LA and ratios of CT/LA. Dielectric constants are in the range of 3~15. In addition, we could get low TCC and High Q value that could not achieve in other ceramic-polymer composites. Especially, in composite with x=0.01 and 30 vol% CT-LA, the dieletric constant and Q-value are 10 and 200, respectively. And more TCC is $-28{\sim}300ppm/^{\circ}C$ in the temperature range of $-55{\sim}125^{\circ}C$. We think that this composites can be used high-Q substrate material like LTCC and embedded temperature compensation capacitor in printed circuit boards.

• Bulletin of the Korean Chemical Society
• /
• 제20권4호
• /
• pp.417-421
• /
• 1999

The complex, K3[La(TTHA)]5H,O, was prepared and its crystal structure was analyzed by single crystal X-ray diffraction method. In the complex, the La(Ⅲ) ion adopts a ten-coordinate geometry with four nitrogen atoms and six carboxyl oxygen atoms from the same TTHA ligand molecule. Its coordination polyhedron can be described as a distorted bicapped square antiprism. Each [La(TTHA)]3- anion is linked by K+ cations via carboxyl groups of TTHA ligand to form a three dimensional crystal structure. The thermal properties were investigated by TG and DTA techniques in argon atmosphere. The materials resulting from thermal treatment were La(OH)3 and K2O which were identified by powder X-ray diffraction technique.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1495-1498
• /
• 2005

Due to an efficient red emission, $Eu^{+3}$ ions have doped in various host materials. Eu-doped $LaPO_4/LaPO_4$ core/shell nanophosphor which emits red light in visible range, was synthesized by using a solution system. The mean size of the nanoparticle observed by TEM was about 7-8 nm. In this core/shell system, the thickness of $LaPO_4$ shell was optimized on the basis of relative PL emission intensity. In addition, the luminescent properties of $LaPO_4:Eu/LaPO_4$ core/shell particle have been compared with Eu-doped $LaPO_4$ bulk particle and nanoparticle.