• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.85-90
• /
• 2001

The microstructure and mechanical property of 0.19C-1.17Cr steel were investigated with cold drawing. This commercial steel has the microstructure that is consist of ferrite and pearlite. The tensile and yield strength are increased as the reduction ratio of cold drawing is increased. It was clear that mechanical properties could be improved by combination of the heat treatments and reduction ratio. Yield strength. tensile strength, and impact value were formulated as a constitutive function of cold drawing ratio, respectively.

• Natural Product Sciences
• /
• 제9권1호
• /
• pp.10-12
• /
• 2003

In the present study, dikamali resin (obtained from the leaf buds and the young shoots of Gardenia gummifera Linn.) was extracted with diethyl ether and the extract was vacuum dried. Qualitative tests confirmed the presence of flavonoids and free phenolic compounds in the extract. The antioxidant property (qualitative) of the extract was performed by TLC method $({\beta}-carotene-linoleate method)$. The $LD_{50}$ of the extract was found to be 2227 mg/kg by Karber's arithmetic method. The extract was screened for analgesic, anti-inflammatory, antipyretic (100, 200 and 400 mg/kg) and anthelmintic (0.1,0.2 and 0.5%w/v) activities by standard methods. The extract exhibited antioxidant property and prevented oxidation of ${\beta}-carotene$. The extract exhibited significant graded dose response for analgesic, anti-inflammatory, antipyretic and anthelmintic activities. The extract caused the death of earthworms in all experimental concentration whereas the standard drug (piperazine) only effected paralysis. The present study proved the claims of dikamali resin mentioned in the Indian system of medicine.

• 대한수학회지
• /
• 제39권1호
• /
• pp.61-75
• /
• 2002

Under the cancellation property and the Lipschitz condition on kernels, we prove that the Marcinkiewicz integrals defined on a homogeneous group H are bounded from $H^1$(H) to $L^1$(H), from $L_{c}$ $^{\infty}$(H) to BMO (H), and from $L^{p}$ (H) to $L^{p}$ (H) for 1 < p < $\infty$ assuming the $L^{q}$ -boundedness for some q > 1.for some q > 1.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.705-708
• /
• 2004

The spatial variability of the L- and C- band large scale remotely sensed soil moisture data, obtained during tire Southern Great Plain 1999 (SGP'99), was characterized. The results demonstrate that soil moisture data using L-band show the break in statistical symmetry (multiscaling behavior) with the variation of scale of observation, which is similar to that of the soil property such as sand content. Also, soil moisture data using C-band show single scaling behavior with the variation of scale of observation, which Is similar to that of the vegetation condition.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.194-198
• /
• 2010

Cubic boron nitride (c-BN) is a promising material for use in many potential applications because of its outstanding physical properties such as high thermal stability, high abrasive wear resistance, and super hardness. Even though 316L austenitic stainless steel (STS) has poor wear resistance causing it to be toxic in the body due to wear and material chips, 316L STS has been used for implant biomaterials in orthopedics due to its good corrosion resistance and mechanical properties. Therefore, in the present study, c-BN films with a $B_4C$ layer were applied to a 316L STS specimen in order to improve its wear resistance. The deposition of the c-BN films was performed using an r.f. (13.56 MHz) magnetron sputtering system with a $B_4C$ target. The coating layers were characterized using XPS and SEM, and the mechanical properties were investigated using a nanoindenter. The friction coefficient of the c-BN coated 316L STS steel was obtained using a pin-on-disk according to the ASTM G163-99. The thickness of the obtained c-BN and $B_4C$ were about 220 nm and 630 nm, respectively. The high resolution XPS spectra analysis of B1s and N1s revealed that the c-BN film was mainly composed of $sp^3$ BN bonds. The hardness and elastic modulus of the c-BN measured by the nanoindenter were 46.8 GPa and 345.7 GPa, respectively. The friction coefficient of the c-BN coated 316L STS was decreased from 3.5 to 1.6. The wear property of the c-BN coated 316L STS was enhanced by a factor of two.

• 대한토목학회논문집
• /
• 제26권4B호
• /
• pp.329-334
• /
• 2006

Southern Great Plain 1999 실험을 통하여 획득된 L-band와 C-band 토양수분 측정치의 공간 변화 양상을 분석하였다. L-band 토양수분 측정치의 스펙트럼은 관측 스케일의 변화와 함께 토양수분의 공간 변화 양상이 변화됨을 보여주었고, 이러한 변화 양상은 모래함유비와 같은 토양 특성의 공간 변화 양상과 일치함을 보여주었다. 그리고 C-band 토양수분 측정치의 공간 변화 양상은 관측 스케일의 변화와 상관없이 일정한 변화도를 가지는 것으로 나타났다. 이는 식생피복의 공간 변화 양상과 동일함을 보여주는 것이다. 이러한 결과는 AMSR기기를 이용하여 현재 진행되고 있는 토양수분의 전 지구 관측치의 downscaling시 고려되어야 할 것이다.

• 대한수학회보
• /
• 제21권2호
• /
• pp.91-95
• /
• 1984

Let D$^{p}$ be the space of distributions of $L^{p}$-growth and S the space of tempered destributions in $R^{n}$: D$^{p}$, 1.leq.P.leq..inf., is the dual of the space $D^{p}$ which we discribe later. We denote by O$_{c}$(S:S') the space of convolution operators in S. In [8] S. Sznajder and Z. Zielezny proved the following necessary conditions for convolution operators in O$_{c}$(S:S) to be solvable in S.

• 대한수학회보
• /
• 제40권3호
• /
• pp.503-508
• /
• 2003

We prove that every M-ideal is strongly proximinal and that, for any Banach space X, $K(X,\;c_0)$ is an M-ideal in $L(X,\;\ell^{\infty})$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.407-410
• /
• 2000

(M $n_{l-x}$M $g_{l-x}$)F $e_{2+x}$ $O_4$(x=0.0, 0.025, 0.1, 0.2) for NTC(negative temperature coefficient) thermistor was prepared by calcining at 80$0^{\circ}C$ and sintering at from 1100 to 130$0^{\circ}C$ with 5$0^{\circ}C$ intervals while x was varied from 0.0 to 0.025, 0.1 and 0.2. The best linear property was obtained in the based specimen sintered at 120$0^{\circ}C$ with x=0.1 composition. Thermistor parameter, $B_{25~85^{\circ}C}$, was in the range of 5000~ 7300 [K]. Temperature coefficient of resistance, $\alpha$$_{25^{\circ}C}$, was -5.2 %/$^{\circ}C$. The results showed the possibility that Mn-Ni-Co based thermistor could be substituted by the composition used in this study was confirmed.med.d.

• 산업기술연구
• /
• 제20권A호
• /
• pp.39-44
• /
• 2000

Highly viscous biopolymer from alkali-tolerant Bacillus sp. was purified and its solution properties were investigated. The intrinsic viscosities for crude biopolymer and biopolymers purified by dialysis or CPC(cetylpyridinium chloride) treatment were 58.24, 73.60 and 42.18 dL/g, respectively. The intrinsic viscosity of biopolymer showed the maximum value at the neutral pH but it was decreased remarkably at the alkaline or acidic pH. Biopolymer exhibited the property of polyelectrolyte, showing the sharp decrease of intrinsic viscosity by the addition of NaCl. Intrinsic viscosity of dilute solution at the low NaCl concentration was exponentially dependent on temperature and its temperature dependency was increased with NaCl concentrations. The chain stiffness, coil overlap parameter, and critical concentration were 0.09, 5.25 and 0.07g/dL, respectively. Temperature dependency on intrinsic viscosity of biopolymer solution was different each other at $45^{\circ}C$. Flow activation energies at temperatures above $45^{\circ}C$ were constant, while those at temperatures below $45^{\circ}C$ increased with increase of added NaCl concentration.