• Title/Summary/Keyword: $L_2$ 이득

Search Result 224, Processing Time 0.027 seconds

Implementation of a 600Hz Power Amplifier Module for 60GHz Wireless LAN System (60GHz 무선 LAN 시스템에 탑재를 위한 600Hz대역 전력증폭기 모듈 제작)

  • 장우진;홍주연;강동민;이진희;윤형섭;심재엽;이문교;전영훈;김삼동
    • Proceedings of the IEEK Conference
    • /
    • 2002.06b
    • /
    • pp.181-184
    • /
    • 2002
  • 본 논문에서는 600Hz 무선 LAN 시스템에 탑재를 위한 600㎓ 대역 전력증폭기 모듈을 개발 하였다. 600㎓ 대역 전력증폭기 모듈에 실장된 600㎓ 대역 전력증폭기 MMIC는 ETRI에서 설계 및 제작한 것으로 칩의 크기는 2.80 × 1.75㎟이며, on-wafer측정을 하여 얻은 결과는 동작 주파수 58~620Hz에서 소신호 이득은 12.4dB이고, 최대 소신호 이득은 59~60G보z에서 ISdB이며, 출력전력(Pldn)은 16.3~16.7dBm을 얻었다. 이와 같은 특성을 갖는 전력증폭기 MMIC를 사용하여 모듈을 제작하였으며, RF feed line을 위해 Rogers 사의 R03003 기판을 사용하였다. 모듈의 입출력은 동작 주파수 대역에 적합한 WRl5라는 waveguide 형태를 사용하였고, DC 바이어스 공급을 위해 3.5㎜ K-connector를 사용하였다 제작한 모듈의 크기는 40 × 30 × 15㎣이며, 최적의 성능을 얻고자 tuning bar를 상하로 이동하여 최적점을 찾았으며 나사로 고정하여 상태를 유지하도록 하였다. DC 바이어스 및 RF feed line과 칩의 연결은 본딩에 의한 인덕턴스를 최소화하기 위하여 3mil 두께의 리본 본딩을 하였다 전력증폭기 모듈을 측정한 결과, 동작주파수 600㎓ 대에서 소신호 이득은 6dB 이상, 입력 정합은 -lOdB 이하, 출력 정합은 -4dB 이하로 측정되었긴, 출력전력은 SdBm 이상으로 측정되었다. 동국대에서 제작한 600Hz 무선 LAN 시스템에 전력증폭기 모듈을 시스템 송신부에 탑재 시험한 결과, 동영상을 실시간으로 전송하는데 성공하였다.

  • PDF

Performance Analysis of a Concatenated Coded DS/CDMA System in Asynchronous Rayleigh Fading Channels (비동기 레일리 감쇄 채널에서 쇄상부호 직접수열 부호분할 다중접속 시스템의 성능분석)

  • Kim, Kwang-Soon;Song, Iick-Ho;Yoon, Seok-Ho;Kim, Hong-Gil;Lee, Yong-Up
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.36S no.9
    • /
    • pp.1-8
    • /
    • 1999
  • In this paper, we propose and analyze a concatenated coding scheme for DS/CDMA systems in asynchronous channels. In the concatenated coding, bandwidth efficient $2^{2L-2}$-state ${\frac{L}{L+1}}$-rate 2-MTCM with biorthogonal signal constellation is used for the inner code, and $(2^{L-1},\;{\lceil}\frac{2^{L-1}}{L/2}{\rceil})$ RS code is use for the outer code. It is shown that we can get considerable performance gain over the uncoded system without sacrificing the data transmission rate. The proposed system can be used as a coding scheme for reliable and high speed integrated information services of mobile communication systems.

  • PDF

A Single Layer Multi Band Microstrip Patch Antenna for GPS L1/L2, GLONASS Receiver Applications (GPS L1/L2, GLONASS 수신기용 다중 대역 단일 패치 안테나)

  • Kim, Ji-Hae;Kim, Mi-Suk;Kim, Jong-Seong;Son, Seok-Bo;Kim, Young-Baek
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.22 no.10
    • /
    • pp.990-998
    • /
    • 2011
  • In this paper, we have designed a multi-band single layer microstrip patch antenna with slots for GPS L2/L1, GLONASS receivers. The antenna has dual feed structure and consists of single layer microstrip patch with slots and impedance matching circuit. The antenna specifications are a VSWR(Voltage Standing Wave Ratio) of less than 2.0, RHCP(Right-Hand Circular Polarization) characteristics over the operating frequency bands of GPS L2(1,227.6 MHz)/L1(1,575.42 MHz) and GLONASS(1,602 MHz), the maximum active antenna gain of more than 30 dB and the axial ratio of less than 3 dB. The antenna has been successfully evaluated by various tests.

An Analysis of TX/RX Microstrip Single Element using FDTD at Ku-band and 8X4 Array Antenna (FDTD 방법을 이용한 Ku 대역 송수신 겸용 마이크로스트립 단일 소자 해석 및 8X4 배열 안테나)

  • 윤재승;전순익
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.14 no.8
    • /
    • pp.830-838
    • /
    • 2003
  • In this paper, TX/RX dual operation microstrip single antenna for satellite communication is designed, analyzed, fabricated and measured. TX/RX frequency ranges are 14.0∼l4.5 GHz, 11.7∼12.75 GHz in respectively and vertical and horizontal polarizations are used for TX and RX. This antenna uses microstrip direct feeding for RX and aperture coupled strip-line feeding for TX and accommodates stacked elements for a high directivity and wide impedance bandwidth. In an analysis of single element, FDTD and MOM was compared and FDTD analysis was more accurate because of the consideration of finite structure and imperfect two ground planes. The proposed structure facilitates generally to an extension of two dimensional array and lower an unwanted radiation by strip-line feed in TX. TX/RX 8${\times}$4 array has a return loss below -10 dB, -14 dB in TX, RX respectively and a gain ranging from 19.1∼20.7 dB in TX, 21.2∼21.8 dB in RX which has a radiation efficiency of 43∼5l %, 52∼57 %.

Fabrication of Compact Patch Antenna for the Indoor Repeater System (실내 간이 중계기용 소형 패치안테나 제작)

  • 손태호;송문수
    • Proceedings of the KAIS Fall Conference
    • /
    • 2003.06a
    • /
    • pp.298-300
    • /
    • 2003
  • 미국 PCS 대역 실내 간이 중계기에 사용될 수 있는 소형 안테나를 개발 제작하였다. 이동통신용 PCS 주파수는 CDMA에 비해 2배 정도 높기 때문에 건물 등 실내에서 통신하기에는 감쇠가 심하다. 따라서 건물 밖 신호를 받아서 건물의 특정부분으로 중계해주는 시스템이 필요하게 된다. 이 연구에서는 벽걸이 혹은 사진액자 형태의 중계기에 사용될 수 있는 소형이면서도 대역특성이 넓은 패치 안테나를 제작하였다. A4 크기의 중계기에 적용되는 소형 패치 안테나를 2개 배열하여 측정한 결과 S11의 -10㏈ 대역폭은 1.7 - 2.1㎓로 400㎒ 의 광대역이고, 이득 6 - 8.5㏈i 및 -l8㏈의 F/B 비 특성을 보였다.

  • PDF

Design of Bluetooth Receiver Front-end using High Gain Low Noise Amplifier and Microstrip Bandpass Filter (마이크로스트립 대역통과 여파기와 고이득 저잡음 증폭기를 이용한 블루투스 리시버 전반부 설계)

  • 손주호;최성열;윤창훈
    • Journal of Korea Multimedia Society
    • /
    • v.6 no.2
    • /
    • pp.352-359
    • /
    • 2003
  • In this paper, we designed the bluetooth receiver using the microstrip bandpass filter and the high gain low noise amplifier with the 0.2$\mu\textrm{m}$ CMOS technology. A cascode inverter is adopted to implement the low noise amplifier and is one stage amplifier with a voltage reference and without the choke inductor. The designed 2.4GHz LNA was achieved a power gain of 18dB, a noise figure of 2.8dB, and the power consumption of 255mW at 2.5V power supply. Also, the microstrip receiver bandpass filter was designed that the center frequency was 2.45GHz, the bandwidth was 4% and the insert attenuation was -1.9dB. When the microstrip bandpass filter and LNA was simulated together the power gain was 16.3dB.

  • PDF

High Efficiency FPCB Antenna for the Dual Band Mobile Phone (휴대폰용 2중 대역 고효율 FPCB 안테나)

  • Seo, Sang-Hyuk;Son, Tae-Ho;Jo, Young-Min
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.11
    • /
    • pp.1194-1200
    • /
    • 2009
  • An internal antenna which has 1 cc volume was implemented on the FPCB(Flexible Printed Circuit Board) for the mobile phone. We increased antenna gain and efficiency by the applying of current direction concept on the antenna pattern for this small antenna. Short antenna length for the GSM band was compensated by the spiral inductor on the FPCB. For broadening bandwidth on GSM band, it's applied 2 spiral inductors. A conductor pattern for the DCS band was positioned perpendicular with the FPCB. Antenna was implemented on FPCB that is dielectric constant 4.4 and thickness 0.05 mm, and FPCB was attached on a carrier dimensioned $L{\times}W{\times}H=30{\times}7{\times}5\;mm$. Measurements showed that max. VSWR 2:1, efficiency 42.49~60.95 % and 47.95~73.21 %, average gain -3.72~-2.15 dBi and -3.19~-1.35 dBi on the GSM and DCS band, respectively. These results are good performances among the small antenna. And the radiation patterns are omnidirectional on the H-plane to both band.

Compact & Contact DVB-H Antenna with Broad Dual-band operation for PMP Applications (광대역의 이중대역 동작을 위한 PMP용 소형/부착형 DVB-H 안테나)

  • Yeom, In-Su;Park, Jae-Woo;Jung, Chang-Won
    • Proceedings of the KAIS Fall Conference
    • /
    • 2009.12a
    • /
    • pp.846-849
    • /
    • 2009
  • 본 논문에서는 듀얼 밴드(UHF: 470-862 MHz, L: 1452-1492 MHz) DVB-H 안테나를 제작하였다. 제안된 안테나는 입력 임피던스 매칭 회로를 이용한 평판형 역 F 안테나(PIFA)로 구성되었다. 급전점에 구성된 매칭 회로는 안테나의 광대역(UHF: 470-862 MHz: 63%) 동작특성을 만족시킨다. 제시된 안테나는 전방향적 방사특성을 가지며 상용 모바일(PMP)에 적용가능한 충분한 이득(최대이득: 1.70dBi)을 보인다. 또한 안테나는 유전율($\varepsilon_r$ = 3.2)인 PMP 케이스에 부착되어 상용 모바일용으로 소형화 되었다.

  • PDF

Design and Implementation of W-CDMA Transmitter for 2 GHZ Band (2 GHz대 W-CDMA 송신기의 설계 및 제작)

  • 이승대;백주기;이병선;방성일;진년강
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.10 no.3
    • /
    • pp.368-377
    • /
    • 1999
  • In this paper, the wide-band CDMA transmitter for 2 GHz band is designed and implemented. The CC-OQPSK implemented as ASIC has better spectral and power efficiency than the conventional QPSK system because it has constant envelope characteristics. Good harmonics rejection characteristics and gain of 20 dB are shown on the intermediate frequency stage using double-conversion scheme. The output power of two-stage RF amplifier is +2l.14 dBm in 1.9 GHz band. It is confirmed that the electrical characteristics of the transmitter satisfy with required the specification of the wide-band CDMA transmitter for 2 GHz band.

  • PDF

Design of a 2.5V 300MHz 80dB CMOS VGA Using a New Variable Degeneration Resistor (새로운 가변 Degeneration 저항을 사용한 2.5V 300MHz 80dB CMOS VGA 설계)

  • 권덕기;문요섭;김거성;박종태;유종근
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.40 no.9
    • /
    • pp.673-684
    • /
    • 2003
  • A degenerated differential pair has been widely used as a standard topology for digitally programmable CMOS VGAs. A variable degeneration resistor has been implemented using a resistor string or R-2R ladder with MOSFET switches. However, in the VGAs using these conventional methods, low-voltage and high-speed operation is very hard to achieve due to the dc voltage drop over the degeneration resistor. To overcome this problem a new variable degeneration resistor is proposed where the dc voltage drop is almost removed. Using the proposed gain control scheme, a low-voltage and high-speed CMOS VGA is designed. HSPICE simulation results using a 0.25${\mu}{\textrm}{m}$ CMOS process parameters show that the designed VGA provides a 3dB bandwidth of 360MHz and a 80dB gain control range in 2dB step. Gain errors are less than 0.4dB at 200MHz and less than l.4dB at 300MHz. The designed circuit consumes 10.8mA from a 2.5V supply and its die area is 1190${\mu}{\textrm}{m}$${\times}$360${\mu}{\textrm}{m}$.