• 생명과학회지
• /
• 제14권1호
• /
• pp.115-120
• /
• 2004

민자주방망이버섯은 우수한 식용버섯으로 세계적으로 분포하고 있는 종이다. 민자주방망이버섯과 5가지 송이과버섯 종들의 유전적인 변이와 분류학적 관계를 RAPD에 의해 분석 하였다. RAPD에 15가지 random primer를 사용하였다. 버섯들의 유전적 거리는 UPCMA를 사용하여 측정하였고 계통유전학적 유연관계는 neighnor-joining (NJ) 방법을 사용하여 분석하였다. PCR에 의하여 증폭된 RAPD 절편들은 100bp에서 1600 bp이었다. Nei-Li의 유전적 거리는 228개의 DNA밴드를 사용하여 계산하였고 이를 바탕으로 계통유전학적 계통수를 만들었다. 민자주방망이버섯, 자주방망이버섯 아재비, 가랑잎애기버섯, 밀버섯, 만가닥버섯, 졸각버섯의 유전적 변이 는 각각 0∼21.3%, 21.2∼28.0%, 15.4∼23.0%, 14.0∼21.8%, 16,5∼34.6%, 12.4∼27.4%이였다. CI (Consistency index), RI (Retention index), HI (Homoplasy inedx)의 값은 각각 0.5217, 0.5769, 0.5156이었다. 또한 NJ tree로 두 그룹을 만들 수 있었다. 유전적 거리는 민자주방망이버섯과 자주방망이버섯아재비보다 민자주방망이버섯과 밀버섯이 더 가까웠다.

• 해양환경안전학회지
• /
• 제24권2호
• /
• pp.133-139
• /
• 2018

해상교량 하부의 직선항로 길이 확보는 선박 통항 안전을 위한 중요한 요소 중 하나이다. 그러나 항만 및 어항 설계기준에 따르면 해상교량 하부 직선항로 길이는 선박길이의 8배로 획일적인 가이드라인을 적용하고 있다. 본 연구는 적정 해상교량 하부직선길이를 도출하기 위해 ES 모델을 이용하여 항로폭, 통항량, 항로의 곡률, 직선항로길이에 따른 위험도 비율을 확인했다. 확인 결과 항로의 곡률이 $45^{\circ}$의 경우 항로길이가 3L에서 10L로 길어짐에 따라 위험도 비율이 2.27 % 감소했다. 곡률에 따른 위험도는 직선항로의 길이가 3L의 경우 곡률이 $45^{\circ}$에서 $0^{\circ}$로 변하면서 위험도 비율이 4.83 % 감소하는 것을 확인했다. 또한 항로폭 400 m, 시간당 발생선박이 20척의 조건에서 항로의 곡률별, 직선항로에 따른 위험도 비율은 최대 1.45 % 감소하는 것을 확인했다. 이를 통해 해상 교량 건설 시 항로의 혼잡도 및 곡률에 따라 일정 길이 이상의 직선항로가 필요함을 검증했다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.539-544
• /
• 2009

The constraint effect $A_2$ has to be evaluated within plastic region near crack tip front using opening displacement. Plastic boundary and stress or strain conditions in the vicinity of the crack tip using recrystallization heat treatment was represented. It was found that the plastic deformation boundary by recrystallization heat treatment method was the true strain of ${\epsilon}t$ = 0.05mm/mm. With the estimation of constraint effects $A_2$, the region of proper displacement measurement point near crack tip was between 0mm and 1mm distance toward direction of crack propagation, and was between 1mm to 3mm distance toward direction of load line.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.125-134
• /
• 1997

This study was conducted by L9 orthogonal array to obtain optimum spray parameters for This study was conducted by L9 orthogonal array to obtain optimum spray parameters for $Cr_3C_2 - 7wt%$(80wt%Ni-20wt%Cr) coating powder. The factors were hydrogen flow rate, oxygen flow rate, gun-to-work distance, powder feed rate. And evaluation methods for the coating were surface roughness, oxygen concentration, micro-hardness, pore size and distribution, low angle ($30^{\circ}$) erosion rate, and microstructure of coating. The optimum HVOF spray conditions were proved as follows : hydroen flow rate ; 681 SLPM, oxygen flow rate ; 215 SLPM $H^2/O^2 ratio= 3.16), gun-to-work distance ; 22cm, powder feed rate; 25g/min. The hardness (Hv300) was 1147 and the erosion rate ($30^{\circ}$degree) was $3.16\times10^{-4}$g/g. It is believed that the optimized spray conditions can be improved the wear-resistance and anti-erosion characteristics of the coating.

• 한국터널공학회:학술대회논문집
• /
• 한국터널공학회 2005년도 학술발표회 논문집
• /
• pp.225-232
• /
• 2005

The construction of parallel tunnel by using the shield TBM method was increased recently. Accordingly the application and the propriety of the parallel shield TBM tunnels were studied through domestic and foreign construction cases herein. Also the behavior of tunnel structure and ground was evaluated by a numerical analysis with various ground conditions and the distance between the parallel tunnels. As a result, it was concluded that a deep investigation as well as a ground reinforcement was required with a ratio(L/D) of the distance between the parallel tunnels(L) to tunnel outer diameter(D) less than 0.5 because the Interference phenomenon was expected to occur. And the appropriateness of the application method of parallel shield TBM tunnel was validated through the 2-dimensional numerical analysis simulated the process of excavation after the ground reinforcement in the starting area of the OOO construction site with the ratio(L/D) of 0.35.

• 한국광학회지
• /
• 제16권5호
• /
• pp.411-416
• /
• 2005

Optical Time Domain Reflectometry를 이용하여 수백 km 이상의 장거리 광통신망을 감시하기 위해서는 감시광을 증폭시켜야한다. 본 논문에서는 1625 nm OTDR 감시광을 증폭시키기 위해 fiber Bragg grating과 band pass filter를 이용하여 이득과 잡음지수를 각각 5.1 dB 그리고 0.9 dB 향상시킨 2단 구조의 Extended L-band EDFA를 제안하였다. 제안된 Extended L-band EDFA의 1625 nm 대역의 신호 이득은 16.3 dB이고 잡음지수는 7.1 dB였다.

• 한국연초학회지
• /
• 제18권2호
• /
• pp.126-131
• /
• 1996

In this study effects of isolation distance, transplanting time of maternal plants, and bagging of flower head with the gauze-cloth bag on the outcrossing of burley tobacco (Nicotiana tabacum L.) were investigated. Also the effect of fertilizer level and control of the number of capsules per plant on seed production and quality were examined. A male sterile line. produced 0.3 to 3.8 capsules Per plant when it was Planted with normally flowering tobacco with the average outcrossing of 7.2 plants, ranging from 2 to 18 out of 20 plants. With the farther the isolation distance between maternal plants and pollen donor plant, the lower the outcrossing occurred. Outcrossing occurred even at the isolation distance of 312 m. When the maternal plants were transplanted 35 days after transplanting the pollen donor ones, the outcrossed plants were not decreased significantly. The bagging of the flower head with the gauze-cloth bas (#0.9∼ 1.0 mm) decreased the outcrossed plants significantly, but couldn't prevent the outcrossing completely. The seed amount per plant was higher in the highly fertilized cultivation. The number of seed capsules per plant affected significantly on seed yield and quality. When the seed capsules was controlled by 30 or 50 capsules per plant, the weight of 1,000 seeds and germination rate were higher than those with 70 or 90 capsules per plant. Key words : Nicotiana tabacum, outcrossing, bagging.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.88-93
• /
• 2004

This experimental study was carried out to evaluate effect of the radiation heat flux for the pool and spill fire in petroleum storage tanks, which were made form steel. Each of them had the capacity of 250, 2500 and 25000 liter, respectively. The effects of the radiation heat flux are as follows; 1) The intensity of radiation heat flux from a flame decreased exponentially with increasing distance from outside wall of tanks, and increased significantly with surface area of tank and dyke. 2) In the case of 25000L tank, the radiation heat flux was about max. 98.9kW/$m^2$ in 1m from wall of tank. 3) The distance, that was able to ignite wood or plastics by radiation heat flux of approximately 12.5kW/$m^2$, was about 3.14m from wall of 25000L tank.

• 대한기계학회논문집B
• /
• 제36권3호
• /
• pp.285-291
• /
• 2012

비예혼합 화염의 안정성에 관한 종래의 연구는 연료노즐이나 퀄의 형상에 초점을 많은 맞추어 왔으나 화염안정화에 중요한 연료의 후퇴거리 및 공기노즐의 홀 형상에 대한 연구는 상대적으로 부족하여 이에 관한 연구가 절실한 실정이다. 따라서, 본 연구에서는 메탄 분류 후퇴거리 및 2 차 공기의 홀 형상에 따른 연소특성을 관찰하기 위해 동축 삼중관 형태의 버너를 설계하였다. 1 차 공기는 스월러를 통하여 분류하였고, 2 차 공기는 홀 형상 및 슬릿 형상의 각 노즐로부터 분류되었다. 본 연구에 사용된 실험실 스케일 버너로부터 2 차 공기의 유속은 화염의 형태에 영향을 끼치는 것을 알 수 있었다. 후퇴거리의 경우 공급관외경의 절반에 해당하는 거리로 설정했을 때 화염이 안정적으로 존재하고, 휘도는 더욱 높아짐을 알 수 있었다.

• 한국작물학회지
• /
• 제44권4호
• /
• pp.345-349
• /
• 1999

This study was carried out to map Bphl and bph2 gene in Mudgo and Sangju13 (Oryza sativa L.) respectively conferring resistance to brown plan-thopper (BPH) and to establish the marker-assisted selection (MAS) system. Bulked seedling (grown for 20 days) test was conducted with the 73 F4 lines derived from a cross between Nagdongbyeo and Mudgo for Bphl and with 53 BC3F5 lines derived from the Milyang95/Sangju13 cross for bph2. Bph1 was mapped between RG413 and RG901 on chromo-some 12 at a distance of 7.5 cM from RG413 and 8.4 cM from RG90l. A recessive gene bph2 was located near RZ76 on chromosome 12 at a distance of 14.4 cM. Bphl and bph2 were linked to each other with a distance of about 30 cM. An RFLP marker, RG413 linked to Bphl, was converted to an STS marker to facilitate the marker-assisted selection. BPH resistant genotypes could be selected with 92% accuracy in a population derived from a line of NM47-B-B.