• Journal of Mechanical Science and Technology
• /
• v.14 no.1
• /
• pp.11-18
• /
• 2000

Fracture toughness JIC and KIC tests were performed on A516 Gr70 carbon steel plate at the temperature ranging from -$160^{\circ}C$ to $600^{\circ}C$, and test results were analyzed according to ASTM E 813 and ASTM E 399. Unloading compliance J-integral tests were performed on 1TCT specimens. The relation between the $J_{IC}$ value and the test temperature was obtained. It was concluded that the temperature ranging from $-15^{\circ}C$ to $600^{\circ}C$ is the upper shelf region of ductile-brittle transition temperature, and in this temperature range, fracture toughness $J_{IC}$ values decreased with increasing temperature. The ductile brittle transition temperature of the material may be around $-30^{\circ}C$. In the region near $-30^{\circ}C$, the tendency of $J_{IC}$ to decrease with decreasing temperature was significant.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.165-166
• /
• 2006

343 kV GIS 다빈도 조작 CB 내부에 접점이 마모되어 많은 파티클이 발생한다. 이러한 파티클이 GIS 네부에 존재할 때 어떠한 영향을 미치는지 이론적으로 근거를 제시하고, 이를 실험적으로 검증을 하였다. 현장에서 수거한 파티클을 설치 운영중인 PDMS 장비와 HAEFELY 장비를 이용하여 실험용 GIS에 삽입후 발생하는 현상들을 동시에 비교 분석하고자 한다.

• 대한임상약리학회:학술대회논문집
• /
• 2003.12a
• /
• pp.20-21
• /
• 2003

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.168-174
• /
• 2006

The purpose of this study is to develop the cold chain system by developing optimal phase change materials (PCM). There are some benefits from developing this system such as keeping freshness of agriculture products, saving energy, etc. The major results are as follows. To decide a latent heat material, the characteristics of water, sodium, polyacrylate, ethanol and N-tetradecane are analysed. Also, an insulating material is made by mixing water, nucleating agent and latent heat material, using cementing method. In addition, the sensitivity analysis for developed latent heat material($K_l,\;K_2,\;K_3$) is conducted. For $K_l,\;K_2,\;K_3$ which cans keep latent heat temperature, ranging from $0\;to\;5^{\circ}C,\;5\;to\;10^{\circ}C,\;10\;to\;15^{\circ}C$. it can keeps latent heat temperature at radiant heat (5, 12, $17^{\circ}C$) and transportation latent heat container both melting temperature and amount of latent heat of Kl are $-1.6{\pm}1.0^{\circ}C$, 326.51 J/g, respectively and freezing temperature and latent heat are $-7.98{\pm}1.5^{\circ}C$ and 174.18 J/g. and $K_2$ are $7.41{\pm}1.5^{\circ}C$, 89.80 J/g, respectively and freezing temperature and latent heat are $-2.14{\pm}1.5^{\circ}C$ and 83.90 J/g. and $K_3$ are $9.54{\pm}1.0^{\circ}C$, 145.42 J/g, respectively and freezing temperature and latent heat are $0.21{\pm}1.0^{\circ}C$ and 152.48 J/g.

• 대한핵의학회:학술대회논문집
• /
• 2005.11a
• /
• pp.317.1-317.1
• /
• 2005

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.101-104
• /
• 1977

Lipase from Geotrichum candidum was heat inactivated in 0.1M phosphate buffer solution. The thermal inactivation followed first order kinetics for the range of temperatures $50^{\circ}-80^{\circ}C$ except at $50^{\circ}C$. The changes in enthalpy, entropy and Gibbs free energy at $60^{\circ}C$ were 120.4 kJ/mol, 73.0 J/mol K and 96.9 kJ/mol respectively a value of $19^{\circ}C$(Geotrichum candidum lipase) is greater than that of lipases from milk and pancreas. The effect of detergents, lecithin and linoleic acid or the thermal inactivation of lipase was found to be negligible.

• Korean Journal of Animal Reproduction
• /
• v.27 no.1
• /
• pp.69-75
• /
• 2003

The objective of this study is to improve the efficiency of embryo transfer in generation of transgenic mice using inbred mouse (C57BL/6J) embryos. The embryos of C57BL/6J and BCF1 mice were superovulated by the standard protocol. One-cell stage of embryos were microinjected and the resulted one-or two-cell were transferred into one-or two-side oviducts of foster mother, respectively. When one-cell stage of embryos were transferred into one-side oviduct of 0.75 d.p.c. foster mother, the results were not ideal because of showing pregnancy ratios of 68.8$\pm$7.83% for C57BL/6J and 48.3$\pm$14.22% for BCF1, and development ratios of pups vs transferred embryos of 11.9$\pm$5.51% for C57BL/6J and 10.5$\pm$8.03% fur BCF1 . However, when two-cell stage of embryos were transferred into two-side oviducts of 0.5 d.p.c. foster mother, we got better results of 94.4$\pm$9.64% and 100$\pm$0% pregnancy ratio, and 22.1$\pm$0.4% and 21.8$\pm$0.38% development ratio for C57BL/6J and BCF1, respectively. Therefore, transferring two-cell stage of C57BL/6J embryos into two-side oviducts of 0.5 d.p.c. foster mother may be competitive to the result in BCF1 embryos. Even if there are a lot of other factors affecting these results, we conclude from these experiments that transfer of two-cell embryos into two-side oviducts of 0.5 d.p.c. foster mother is a more efficient and safe method than others in generating transgenic mice using inbred mice embryos.

• Korean Journal of Mathematics
• /
• v.22 no.1
• /
• pp.91-121
• /
• 2014

Let X and Y be vector spaces. It is shown that a mapping $f:X{\rightarrow}Y$ satisfies the functional equation ${\ddag}$ $$2df(\frac{x_1+{\sum}_{j=2}^{2d}(-1)^jx_j}{2d})-2df(\frac{x_1+{\sum}_{j=2}^{2d}(-1)^{j+1}x_j}{2d})=2\sum_{j=2}^{2d}(-1)^jf(x_j)$$ if and only if the mapping $f:X{\rightarrow}Y$ is additive, and prove the Cauchy-Rassias stability of the functional equation (${\ddag}$) in Banach modules over a unital $C^*$-algebra, and in Poisson Banach modules over a unital Poisson $C^*$-algebra. Let $\mathcal{A}$ and $\mathcal{B}$ be unital $C^*$-algebras, Poisson $C^*$-algebras, Poisson $JC^*$-algebras or Lie $JC^*$-algebras. As an application, we show that every almost homomorphism $h:\mathcal{A}{\rightarrow}\mathcal{B}$ of $\mathcal{A}$ into $\mathcal{B}$ is a homomorphism when $h(d^nuy)=h(d^nu)h(y)$ or $h(d^nu{\circ}y)=h(d^nu){\circ}h(y)$ for all unitaries $u{\in}\mathcal{A}$, all $y{\in}\mathcal{A}$, and n = 0, 1, 2, ${\cdots}$. Moreover, we prove the Cauchy-Rassias stability of homomorphisms in $C^*$-algebras, Poisson $C^*$-algebras, Poisson $JC^*$-algebras or Lie $JC^*$-algebras, and of Lie $JC^*$-algebra derivations in Lie $JC^*$-algebras.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.4
• /
• pp.210-216
• /
• 2006

The circle hook experiments were conducted to compare the catch rates of target and bycatch species between J hook and circle hooks in the tuna longline fishery of the eastern Pacific Ocean between $1^{\circ}48'S-7^{\circ}00'S\;and\;142^{\circ}00'-149^{\circ}13'W$ from July 15 to August 12, 2005. In the target species group no significant differences among 3 types hook, between size 4.0 traditional tuna hooks(J-4) and size 15 circle hooks(C15), and between C15 and size 18 circle hooks(C18) were revealed, but significant differences were found between J-4 and C18. In the bycatch species group significant differences were found among 3 types hook, between J 4 and C15, and between J-4 and C18, but no significant differences were revealed between C15 and C18. Large circle hook(C18) had the lowest catch rate for tunas and for other fishes, and the small circle hook(C15) had lowest rate for billfishes and sharks. The length distributions for bigeye tuna are very similar for the 3 hook types. There were very slight differences in length size between hook types in the bycatch species.

• Journal of the Korean Society for Railway
• /
• v.8 no.3
• /
• pp.222-227
• /
• 2005

This study investigates the change of the temperature and mechanical properties of the braking disk for the railway vehicle. The average temperature is measured about $100^{\circ}C$ and the maximum temperature is measured over $200^{\circ}C$ by non-contact sensor from Seoul to Chun-an. As a result of measuring, we determine the temperature of test(tensile and J-integral) at $20^{\circ}C,\;100^{\circ}C,\;200^{\circ}C$ and $300^{\circ}C$. In the test, the material values are decreased by the increasing of the temperature. But ratio of decreasing is the largest at $200^{\circ}C$, the tensile test value is decreased about $10\%$ and the J-integral test value is decreased $30\%$. The mechanical properties of this material are mostly changed at $200^{\circ}C$.