• BMB Reports
• /
• v.32 no.6
• /
• pp.585-593
• /
• 1999

The water and methanol extracts of Artemisia argyi showed significant cytotoxicities against J774A.1 cells but not so much against normal leukocytes. The cytotoxicities were found to be dependent on the extract concentration and the incubation time. The concentration of water and methanol extracts inhibiting 50% of cell proliferation ($IC_{50}$) were estimated to be 44.2 mg/ml and 71.6 mg/ml, respectively. In the presence of Artemisia argyi water extract, total superoxide dismutase (CuZnSOD and MnSOD) activities of media, cytoplasmic and mitochondrial fractions of J774A.1 cells increased in accordance with cytotoxicity. MnSOD was found to be the main component of enhanced total SOD activities, particulary in the mitochondrial fraction. In contrast to SOD, catalase and glutathione peroxidase (GPx) were not found in any instance of the current investigation. In addition, substantial amount of $O_2^-$ appeared to be generated in the mitochondrial fraction under the influence of Artemisia argyi. All data put together, it is postulated that Artemisia argyi extracts seem to stimulate $O_2^-$ generation in mitochondria of J774A.1 cells with concomitant increases of SODs. Since $H_2O_2$, the reaction product of SOD on $O_2^-$, is known to be readily converted to very toxic $OH{\cdot}$ in the absence of catalase and/or GPx cooperation, toxicity derived from ROS such as $O_2^-$, $H_2O_2$, and $OH{\cdot}$ may be the main cause of necrosis and/or apoptosis of J774A.1 cells.

• Journal of Animal Science and Technology
• /
• v.45 no.2
• /
• pp.319-326
• /
• 2003

Angiotensin-I converting enzyme(ACE)inhibitor was isolated from beef by-products. The beef by- product hydrolysates prepared with various proteases were tested for the inhibitory effects against ACE. The proteases used were proteinase A from bakers yeast, protease type ⅩIII fungal and thermolysin. The maximum inhibitory effect was observed after hydrolysis for 12hrs(beef heart) and 24hrs(beef spleen), respectively. After gel filtration, IC50 value was 0.37mg/ml in beef heart and 1.84mg/ml in beef spleen. After RP-HPLC, the IC50 value of peak 1, peak 2, peak 3 and peak-4 were 0.28mg/ml, 0.26mg/ml, 0.25mg/ml and 0.35mg/ml, respectively. In the results of amino acid composition of peak 1, peak 2, peak 3 and peak 4, it was observed that peak 1 was consisted mainly of glycine and methionine, peak 2 was proline, cystine and methionine, peak 3 was proline and peak 4 was alanine, methionine and leucine. In conclusion, beef heart hydrolysate treated with thermolysin+ proteinase A was shown to have the highest inhibitory effect for 12hrs incubation at 37$^{\circ}C$.

• Journal of Life Science
• /
• v.27 no.5
• /
• pp.545-552
• /
• 2017

Julbernardia globiflora, a tropical African tree widespread in Miombo woodland, has been used in folk medicine for the treatment of depression and stomach problems. However, the antioxidative and anticancer activities of J. globiflora remain unclear. The objective of this study is to evaluate the antioxidative and anticancer effects of methanol extract of J. globiflora (MEJG) and the molecular mechanism of its anticancer activity in human colon carcinoma HT29 cells. MEJG exhibited significant antioxidative effect with an $IC_{50}$ (concentration at 50% inhibition) value of $1.23{\mu}g/ml$ measuring by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay and inhibited cell proliferation in a dose-dependent manner in HT29 cells. We found that MEJG induced apoptosis of HT29 cells with the increase of apoptotic cells and apoptotic bodies using Annexin V staining and 4,6-diamidino-2-phenylindole (DAPI) staining, respectively. The MEJG treatment showed the increase of Fas, a death receptor, and Bax, a pro-apoptotic protein, and the decrease of Bcl-2, an anti-apoptotic protein, resulting in the release of cytochrome c from the mitochondria into the cytosol and activation of caspase-3, -8 and -9. The apoptotic effects of MEJG were confirmed by cleavage of poly (ADP-ribose) polymerase (PARP). Collectively, these results suggest that MEJG may exert the anticancer effect in HT29 cells by inducing apoptosis via both the intrinsic and extrinsic pathways.

• Journal of Sensor Science and Technology
• /
• v.27 no.2
• /
• pp.93-98
• /
• 2018

In this paper, an energy-efficient 11.49-bit successive approximation register (SAR) capacitance-to-digital converter (CDC) for capacitive sensors with a figure of merit (FoM) of 31.6 pJ/conversion-step is presented. The CDC employs a SAR algorithm to obtain low power consumption and a simplified structure. The proposed circuit uses a capacitive sensing amplifier (CSA) and a dynamic latch comparator to achieve parasitic capacitance-insensitive operation. The CSA adopts a correlated double sampling (CDS) technique to reduce flicker (1/f) noise to achieve low-noise characteristics. The SAR algorithm is implemented in dual operating mode, using an 8-bit coarse programmable capacitor array in the capacitance-domain and an 8-bit R-2R digital-to-analog converter (DAC) in the charge-domain. The proposed CDC achieves a wide input capacitance range of 29.4 pF and a high resolution of 0.449 fF. The CDC is fabricated in a $0.18-{\mu}m$ 1P6M complementary metal-oxide-semiconductor (CMOS) process with an active area of 0.55 mm2. The total power consumption of the CDC is $86.4{\mu}W$ with a 1.8-V supply. The SAR CDC achieves a measured 11.49-bit resolution within a conversion time of 1.025 ms and an energy-efficiency FoM of 31.6 pJ/step.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.4
• /
• pp.504-513
• /
• 2022

Chitin deacetylase (CDA) inhibitors were developed as novel antifungal agents because CDA participates in critical fungal physiological and metabolic processes and increases virulence in soil-borne fungal pathogens. However, few CDA inhibitors have been reported. In this study, 150 candidate CDA inhibitors were selected from the commercial Chemdiv compound library through structure-based virtual screening. The top-ranked 25 compounds were further evaluated for biological activity. The compound J075-4187 had an IC50 of 4.24 ± 0.16 µM for AnCDA. Molecular docking calculations predicted that compound J075-4187 binds to the amino acid residues, including active sites (H101, D48). Furthermore, compound J075-4187 inhibited food spoilage fungi and plant pathogenic fungi, with minimum inhibitory concentration (MIC) at 260 ㎍/ml and minimum fungicidal concentration (MFC) at 520 ㎍/ml. Therefore, compound J075-4187 is a good candidate for use in developing antifungal agents for fungi control.

• Journal of Wind Energy
• /
• v.14 no.3
• /
• pp.83-90
• /
• 2023

The purpose of this study is to evaluate the inter-laminar fracture toughness characteristics of CFRP pultrusion spar cap materials reinforced with non-woven glass fabric. Test specimens were fabricated by the infusion technique. A non-woven glass fabric and artificial defects were embedded on the middle surface between two pultruded CFRP panels. Double cantilever beam (DCB) and End Notched Flexure (ENF) tests were performed according to ASTM standards. Fracture toughness and crack propagation characteristics were evaluated with load-displacement curves and delamination resistance curves (R-Curve). The fracture toughness results were calculated by compliance calibration (CC) method. The initiation and propagation values of Mode-I critical strain energy release rate value G_Ic were 1.357 kJ/m2 and 1.397 kJ/m2, respectively, and Mode-II critical strain energy release rate values G_IIc were 4.053 kJ/m2 for non-precracked test and 4.547 kJ/m2 for precracked test. It was found that the fracture toughness properties of the CFRP pultrusion spar-cap are influenced by the interface between the layers of CFRP and glass fiber non-woven.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.196-203
• /
• 2004

A three-dimensional (3D) IC technology platform is presented for high-performance, low-cost heterogeneous integration of silicon ICs. The platform uses dielectric adhesive bonding of fully-processed wafer-to-wafer aligned ICs, followed by a three-step thinning process and copper damascene patterning to form inter-wafer interconnects. Daisy-chain inter-wafer via test structures and compatibility of the process steps with 130 nm CMOS sal devices and circuits indicate the viability of the process flow. Such 3D integration with through-die vias enables high functionality in intelligent wireless terminals, as vertical integration of processor, large memory, image sensors and RF/microwave transceivers can be achieved with silicon-based ICs (Si CMOS and/or SiGe BiCMOS). Two examples of such capability are highlighted: memory-intensive Si CMOS digital processors with large L2 caches and SiGe BiCMOS pipelined A/D converters. A comparison of wafer-level 3D integration 'lith system-on-a-chip (SoC) and system-in-a-package (SiP) implementations is presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1175-1178
• /
• 2005

Brittle materials, especially single-crystal silicon wafer, are widely used for sensors, IC industry, and MEMS applications. e general machining process of crack easy materials is by chemical agents, but it is hazardous and time consuming. Also, it is difficult to get high aspect ratio micro structure. As an alternative tool, an AJM(Abrasive jet machining) is promising method in terms of high aspect ratio and production cost. In this study, to get more precise detail compared to general AJM, photo polymer mask, SU-8, used in photolithography was applied in AJM. Process parameters such as abrasive diameter, air pressure, nozzle diameter, flow rate of abrasive in AJM and a variety of conditions in spin coating were decided. Finally, micro channel and mixer was fabricated to see the efficiency of the AJM with photo polymer mask.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1163-1165
• /
• 1987

A novel temperature difference-to-frequency converter using two resistance temperature detectors (RTDs) has been developed. The resistance difference of two RTDs is converted into its equivalent inductance to form the resonant circuit of the Colpitts oscillator. The conversion sensitivity of $16\;Hz/^{\circ}C$ and the residual nonlinearity less than 2.15% over the temperature difference range from $35^{\circ}C$ to $155^{\circ}C$ are obtained by the prototype converter. The frequency drift of oscillator itself is ${\pm}0.5\;Hz$. Thus, the minimum detectable temperature difference is estimated to be ${\pm}0.013^{\circ}C$. The proposed converter, except for two RTDs, can be fabricated in monolithic IC form.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.9
• /
• pp.1369-1373
• /
• 2003

ACE (Angiotensin-I converting enzyme) inhibitory peptides derived from foods are thought to suppress high blood pressure by inhibiting ACE. We tried to make efficient production of the ACE inhibitory hydrolysate from egg albumen. A hydrolysate digested by neutrase presented the highest ACE inhibitory activity ($IC_50\;value=256.35{\mu}g/ml$) and the proper proteolysis was occurred by 1.0% enzyme addition and 4 h incubation at $47^{\circ}C$. Antihypertensive effect of neutrase hydrolysate was investigated in spontaneously hypertensive rats (SHR, n=5). Systolic blood pressure (SBP) was decrease by 6.88% (-14.14 mmHg, p<0.05) at 3 h after oral administration of 300 mg/kg body weight, and by 13.33% (-27.72 mmHg, p<0.05) by emulsified hydrolysate. These results showed that it is very effective to utilize egg albumen as a protein source for the production of ACE inhibitory peptides. However, further studies are required to investigate the methods to increase recovery yield and the isolation of active peptide is necessary for determining its sequence responsible for ACE inhibitory activity.