• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.45-50
• /
• 2005

To determine precise position GPS carrier phase measurements are used. In addition, the multi-antenna system consisting of 2 or more GPS antennas can make attitude determination effectively. When GPS carrier phase measurements are used the integer ambiguity must be fixed. The success rate is used to validate the integer ambiguity. For LEO satellite attitude determination the double difference carrier phase measurements are used, the success rate is calculated using the covariance matrix and the measurement matrix. The constraint that LEO satellite position vector and attitude vector is orthogonal is suggested for improving the success rate. The LEO satellite orbit model is KITSAT3. The results of the simulation are shown and analyzed.

• Journal of Sensor Science and Technology
• /
• v.30 no.3
• /
• pp.175-180
• /
• 2021

In this paper, methods for improving the sensitivity of gas sensors to NO₂ gas are presented. A gas sensor was fabricated based on an SnO₂ nanowire network using the vapor-phase-growth method. In the gas sensor, the Au electrode was replaced with a fluorinedoped tin oxide (FTO) electrode, to achieve high sensitivity at low temperatures and concentrations. The gas sensor with the FTO electrode was more sensitive to NO₂ gas than the sensor with the Au electrode: notably, both sensors were based on typical SnO₂ nanowire network. When the Au electrode was replaced by the FTO electrode, the sensitivity improved, as the contact resistance decreased and the surface-to-volume ratio increased. The morphological features of the fabricated gas sensor were characterized in detail via field-emission scanning electron microscopy and X-ray diffraction analysis.

• Resources Recycling
• /
• v.21 no.4
• /
• pp.53-59
• /
• 2012

In this study, behaviors of removing Sb and Pb by oxidation of molten Bi-Pb-Sb alloy which is a by-product of non-ferrous smelting process was investigated. The molten alloy was oxidized at 1173 K by bubbling $N_2+O_2$ gas through a submerged nozzle. The Sb was removed and recovered as mixed phase of $Sb_2O_3$ and metal Sb. In the case of bubbling $N_2+O_2$ gas into molten Bi-Pb alloy at 923 K, Pb was oxidized and removed to slag. But Bi could not be refined due to simultaneous oxidization of Bi with Pb.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.34.2-34.2
• /
• 2010

We built 7 potential extra-terrestrial planets including the full 3D Earth model with various surface types and 6 planet models, each with uniform surface characteristics. The surface types include ice, tundra, forest, grass, ground and ocean. We then imported these 7 planets into integrated ray tracing(IRT) model to compute their disk averaged spectra and to understand the spectral behavior depending on the geometrical view, illumination phase and seasonal change. The IRT computation show that the 6 planets with uniform surfaces exhibit clear spectral differences from that of the Earth. We then built a phase and seasonal DAS database for the 6 uniform surface planets and used them for parametric spectral decomposition technique to derive the Earth DAS. This computation resulted in the first potential solution to the surface type ratio of the Earth compared to the measured earth surface type ratio. The computational details and the implications are discussed.

• Korean Journal of Poultry Science
• /
• v.33 no.3
• /
• pp.195-202
• /
• 2006

Two experiments were conducted to investigate the effect of dietary selenium sources on performance and selenium retention in broiler chickens and laying hens. In experiment 1, the effects of dietary selenium sources and levels on the weight gain, feed intake, feed conversion, and selenium retention of meat in broiler chickens were investigated. for each growth phase, the basal diet was supplemented with 0 (control), 0.12 and 0.24 ppm Se from sodium selenite (SS) and 0.12, 0.24 and 0.60 ppm Se from selenium yeast(SY). Weight gain was significantly increased(P<0.05) in supplemental 0.24 and 0.60 ppm SY compared to the 0.24 ppm SS by diet during day 1 to 35, but feed intake and feed conversion were not affected by the source or the level of Se. Selenium concentrations of breast and leg muscle were significantly increased(P<0.05) in supplemental SS and SY compared to the control, and linearly increased(P<0.05) as dietary. Se level increased by SY, but there was no difference in supplemental 0.12 ppm SS compared to 0.24 ppm SS. In experiment 2, 12-week-experiment using Hy-Line laying hens(31 wk of age) was conducted to compare the effects of selenium sources and levels on egg production, egg weight, daily egg mass, feed intake, feed conversion, egg quality, and selenium retention of egg in laying hens. A corn-soybean meal basal diet was supplemented with 0 (control), 0.06 and 0.12 ppm Se from sodium selenite (SS) and 0.06, 0.12 and 0.30 ppm Se from selenium yeast(SY). Feed conversion was significantly improved(P<0.05) in supplemental 0.06 ppm SS compared to the control, but egg production, egg weight, daily egg mass, and feed intake were not affected by source and level of Se. Haugh unit was not affected by source or level of Se. Yolk color was significantly(P<0.05) higher in supplemental 0.3 ppm SY compared to the control and other supplement in week 12. Eggshell breaking strength was significantly(P<0.05) higher in supplemental 0.06 ppm SY(P<0.05). Thickness of eggshell was not affected by source or level of Se. Se concentrations of egg was significantly improved(P<0.05) in supplemental SS and SY compared to the control, and was significantly increased(P<0.05) as dietary Se level increased by SS and SY, especially SY more effective compared to the SS.

• Journal of Welding and Joining
• /
• v.22 no.5
• /
• pp.38-45
• /
• 2004

The present study is to investigate the effect of heat input on the microstructure, tensile properties and toughness of single-pass submerged arc bead-in-groove welds produced on SA508 class 3 steels. The heat input was varied in the range of 1.6, 3.2 and 5.0 kJ/mm. The toughness of weld metals was evaluated by using subsize Charpy V-notch specimens in the temperature range of -19$0^{\circ}C$ to 2$0^{\circ}C$. The weld microstructure and fractography were observed by optical and scanning electron microscopies, respectively. With increasing heat inputs, tensile strength and hardness of weld metals were decreased while elongation was increased. The poor notch toughness at 1.6 kJ/mm was attributed to the formation of ferrite with aligned second phase and banitic microstructure with high yield strength while that at 5.0 kJ/mm was due to the presence of grain boundary and polygonal ferrites. The microstructure of the intermediate energy input welds consisted of a high proportion of acicular ferrite with limited polygonal ferrites, which provide improved notch toughness.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.132-136
• /
• 2007

Oxidation resistance of sintered ${\beta}-FeSi_{2}$ was investigated at intermediate temperature range in air atmosphere. Fully dense and porous bodies of ${\beta}-FeSi_{2}$ samples were fabricated by using the Spark Plasma Sintering (SPS). They were annealed at $900^{\circ}C$ for 5days to obtain ${\beta}-FeSi_{2}$ phase. The bulk samples were oxidized at $800,\;900\;and\;950^{\circ}C$ in air atmosphere. The high temperature oxidation tests reveal that amorphous $SiO_{2}$ layer, similar to Si was formed and grew parabolically on ${\beta}-FeSi_{2}$. Accelerated oxidation is not observed as well as cracks and grain boundary oxidation. Granular ${\varepsilon}-FeSi$ was developed below the oxide layer as a result of oxidation of ${\beta}-FeSi_{2}$. Oxidation resistance of sintered ${\beta}-FeSi_{2}$ was excellent for high-temperature thermoelectric application.

• Journal of Powder Materials
• /
• v.11 no.5
• /
• pp.421-426
• /
• 2004

The microstructure and mechanical property of hot-pressed $Al_2O_3/Cu$ composites with a different temperature for atmosphere changing from H$_{2}$ to Ar have been studied. When atmosphere-changed from H$_{2}$ to Ar gas at 145$0^{\circ}C$, the hot-pressed composite was characterized by inhomogeneous microstructure and low fracture strength. On the contrary, when atmosphere-changed at low temperature of 110$0^{\circ}C$ the composite showed more homogeneous microstructure, higher fracture strength and smaller deviation in strength. Based on the thermodynamic consideration and microstructural analysis, it was interpreted that the Cu wetting behavior relating to the formation of CuAlO$_{2}$ is probably responsible for strong dependence of microstructure on atmosphere changing temperature. The reason for a strong sensitivity of fracture strength and especially of its deviation to atmosphere changing temperature was explained by the microstructural inhomogeneity and by the role of CuAlO$_{2}$ phase on the interfacial bonding strength.

• Membrane Journal
• /
• v.25 no.5
• /
• pp.415-421
• /
• 2015

$SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ oxide was synthesized by solid state reaction method. Dense ceramic membrane was prepared using as-prepared powder by pressing and sintering at $1250^{\circ}C$. XRD result of membrane showed single perovskite structure. The oxygen permeability were measured under 0.21 atm of oxygen partial pressure ($P_{O_2}$) and between 800 and $950^{\circ}C$. The oxygen permeation flux of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ membrane was increased with the increasing temperature. The maximum oxygen permeation flux was $1.839mL/min{\cdot}cm^2$ at $950^{\circ}C$. Long period permeability experiment was carried out to confirm the phase stability and $CO_2$-tolerance of membrane containing Nb in the condition of air with $CO_2$ (500 ppm) as feed stream at $900^{\circ}C$. The phase stability and $CO_2$-tolerance of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ were investigated by XRD and TG analysis. The result of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ which exposed carbon dioxide for 100 hours indicated 8wt% of $SrCO_3$. But it was known that the level of $SrCO_3$ production dose not have a significant effect on oxygen permeability.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.36-36
• /
• 2001

간섭계를 이용하는 작업에서 가장 중요한 요구사항은 간섭 필드의 안정성을 높게 유지하는 것이며 이는 안정된 간섭패턴을 이용한 측정에 있어서 정밀성을 확보해 준다. 그러나 진동과 같은 위상잡음에 의해 안정성을 유지하기 힘들다. 본 논문에서는 BaTiO₃의 SPPCM 특성을 이용하여 마흐젠더 간섭계와 같은 전통적인 간섭계 측정시 발생 가능한 위상잡음의 영향을 줄여 안정된 간섭 패턴 확보 방법을 제안하였다. 또한 BaTiO₃로 빛을 입사시킬 때 구형렌즈를 기울여 입사빔을 원형이 아닌 타원형으로 입사시켜 원형 입사의 경우에 비해 SPPCM의 응답시간과 반사율을 개선하였다. 그리고 실험을 통해 결과를 확인하였다.