• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1029-1038
• /
• 2008

In this paper, we propose a method for an arbitrary-view image generation in multi-view video and methods for pre- and post-processing to compensate unattended regions in the generated image. To generate an arbitrary-view image, camera geometry is used. Three dimensional coordinates of image pixels can be obtained by using depth information of multi-view video and parameter information of multi-view cameras, and by replacing three dimensional coordinates on a two dimensional image plane of other view, arbitrary-view image can be reconstructed. However, the generated arbitrary-view image contains many unattended regions. In this paper, we also proposed a method for compensating these regions considering temporal redundancy and spatial direction of an image and an error of acquired multi-view image and depth information. Test results show that we could obtain a reliably synthesized view-image with objective measurement of PSNR more than 30dB and subjective estimation of DSCQS(double stimulus continuous quality scale method) more than 3.5 point.

• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.737-747
• /
• 2017

This experiment was carried out to determine the optimal concentration of agricultural organic materials using sulfur and oil for the insect pest control in pepper and cherry tomato cultivation. The control value of aphids and Oriental tobacco budworm (OTB) was examined one day after spraying with sulfur preparation (SP) (0.33~0.17%), oil preparations (OP) (2.00~0.33%), SP+OP, OP+ginkgo leaf extracts (GLE), SP+OP+GLE on the "Super Manidaa"pepper. The aphid control in pepper was complete by applications of SP+OP (0.25+1.00%) in the early growth stage and the control value was above 98.1% by the application of OP+GLE (1.00+1.00 %), SP+OP+GLE (0.25+1.0+1%), SP+OP+GLE (0.25+1.0+0.5%) in the middle to late growth stage while showing 0% in the control treatment. The OTB was completely controlled by the 3 times application with the high concentration of SP+OP (0.25+1.00%) in pepper cultivation. This result indicates that the oil and the sulfur preparations should be applied at low concentration before insect pests do not appeared, and then sprayed at the high concentration after they appear at pepper plant. The greenhouse whitefly in 'Minichal' tomatoes was completely controlled by three times application of SP (0.25~0.33), OP (1.0~2.00%). and all the treatment of SP+OP. However, continuous control with intervals of 1~3 days was considered favorable in the tomato plant. By the periodical control with agricultural organic materials using sulfur and oil, the greenhouse whitefly, which is a high-temperature insect pest, several moths of OTB did not occur at all. In conclusion, SP+OP (0.17%+0.33%) treatment was the most economical combination to control the aphid, OTB, and greenhouse whitefly in pepper and tomato cultivation when considering operating cost. In addition, we recommend that SP should not be sprayed on the plant shoots during the day time from July to August because of high temperature.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2075-2082
• /
• 2006

This paper presents modeling and optimization techniques for hish efficiency solar cell process on single-crystalline float zone (FZ) wafers. Among a sequence of multiple steps of fabrication, the followings are the most sensitive steps for the contact formation: 1) Emitter formation by diffusion; 2) Anti-reflection-coating (ARC) with silicon nitride using plasma-enhanced chemical vapor deposition (PECVD); 3) Screen-printing for front and back metalization; and 4) Contact formation by firing. In order to increase the performance of solar cells in terms of efficiency, the contact formation process is modeled and optimized using neural networks and genetic algorithms, respectively. This paper utilizes the design of experiments (DOE) in contact formation to reduce process time and fabrication costs. The experiments were designed by using central composite design which consists of 24 factorial design augmented by 8 axial points with three center points. After contact formation process, the efficiency of the fabricated solar cell is modeled using neural networks. Established efficiency model is then used for the analysis of the process characteristics and process optimization for more efficient solar cell fabrication.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.2
• /
• pp.51-72
• /
• 2021

The purpose of this study is to explain the types and causes of errors in zoning data that occur in the topographic map notification procedure, and to prepare a data maintenance plan. In Korea, like the United States, law-based land use regulation is dominant. In other words, according to the land use regulation method in the Act, the government designates zoning for all lots in the country, and landowners check the land use regulations of their land through the Korea Land use Information System. The land use plan confirmation document is important land information that affects the results of administrative dispositions such as land transactions between individuals or permission for development activities. However, there are data errors that occur during the current topographic map notification procedure and data construction process. Therefore, four local governments that can verify data by type were selected in consideration of local government conditions. A number of errors are first, errors in data construction and management in the Korea Land use Information System, and second, errors in lack of expertise that occur while the local government officials maintain data. Third, it was analyzed as an error from the relationship between the serial cadastral map and the zoning DB. Based on the above results, it is hoped that the results of this study will be reflected in the establishment of the KLIP and the reform of the legal system, which is currently underway after the establishment of the 「3rd the Korea Land use Information System Construction Plan」.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.504-511
• /
• 2001

Preventive resin restoration, extended concept of occlusal pit and fissure sealing, is procedure composed of as follows. Cavity preparation is limited to areas of initial caries The cavity is then restored with composite resin, while other sound pits and fissures are sealed with pit and fissure sealant. If pit and assure sealant with which microrestoration is possible is used, it may be of great benefit to both patient and operator in case of difficult-to-control children s treatment. However study on preventive resin restoration using this kind of materials have been scarce. The purpose of this study was to compare the microleakage of four different modes of preventive resin restoration. Restoration using only composite resin was compared together Fifty-five bicuspids were prepared with small class I cavity preparation on the occlusal surface, divided into the following groups and restored accordingly. Group 1 : Cavity was restored with Z-100 composite resin Group 2 : Cavity was restored with Z-100 composite resin. Pits and fissures were then sealed with Teethmate F-1 Group 3 : Cavity was restored with Z-100 composite resin Pits and fissures were then sealed with Ultraseal XT-plus Group 4 : Cavity and pits and fissures were restored with Ultraseal XT-plus altogrether Group 5 : Cavity was restored with Ultraseal XT-plus. Pits and fissures were then sealed with the same material. After restoration, the samples were thermocycled 500 times between $5^{\circ}C$ and $55^{\circ}C$ with a dwell time of 30 seconds. After thermocycling, the samples were dipped into 1% methylene blue solution for 24 hours, then rinsed with tap water. The teeth were then embedded in resin and cut buccolingually along the tooth axis and observed with a stereomicroscope to determine the degree of microleakage. The results were as follows : 1. Group 4 showed the greatest microleakage, while group 3, showed the least. The mean microleakage decreased in the following order:4>1>5>2>3. 2. There was no stastically significant difference between group 1 and group 5(p>0.05). However, group 1 showed significantly greater microleakage compared to group 2 and 3(p<0.05) Group 1 showed significantly less microleakage compared to group 4(p<0.05). 3. Group 2 showed no statistically significant difference compared to group 3(p>0.05). However group 2 showed significantly less microleakage compared to group 4 and 5(p<0.05) 4. Group 3 showed significantly less microleakage compared to group 4 and 5(p<0.05). 5. Group 5 showed significantly less microleakage than group 4(p<0.05).

• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.99-110
• /
• 2010

This paper builds a system of indicators representing rural regional development level. Indicators were classified into two groups, that is, living environment indicator group and regional vitality indicator group. Living environment indicator group consists of four indicators including housing, road, water supply, and sewage system, while regional vitality indicator group consists of five indicators including regional economy, public finance, and demography. Real data of the year 2002 and 2006 were used to do the basic statistical analysis and estimate the suitable statistical distributions for each indicator. Data were applied for the three city/county type, general city, urban-rural combined city, and county. General cities have the strongest urbanization tendency among the three types, while counties have the weakest tendency. General cities turned out to be superior in housing condition, road density, water supply system and sewage system. Indicators of employment and local finance showed the highest levels in counties. The results of this analysis are expected to provide local governments with the appropriate reference for their rural regional development policy.

• Journal of Food Hygiene and Safety
• /
• v.28 no.3
• /
• pp.267-271
• /
• 2013

A survey of aflatoxin $B_1$ and ochratoxin A was conducted on dried red pepper and red pepper powder. Total number of 193 samples were collected from local markets in Incheon. The presence of aflatoxin $B_1$ and ochratoxin A was determined by high performance liquid chromatography (HPLC) with fluorescence detector using immunoaffinity column clean-up. The recovery rate of aflatoxin $B_1$ and ochratoxin A were more than 80% and the limits of quantification were 0.13 ${\mu}g/kg$ for aflatoxin $B_1$ and 0.30 ${\mu}g/kg$ for ochratoxin A. Aflatoxin $B_1$ was detected in 33 samples (17.1%) with a range of 0.14~9.67 ${\mu}g/kg$ and ochratoxin A was detected in 40 samples (20.7%) with a range of 0.31~3.31 ${\mu}g/kg$. These results show that the occurrence of aflatoxin $B_1$ and ochratoxin A in dried red pepper and red pepper powder tested in this study is low compared with the standard in Korea Food Code (10 ${\mu}g/kg$ as aflatoxin $B_1$ and 7 ${\mu}g/kg$ as ochratoxin A).

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.5
• /
• pp.565-574
• /
• 1993

Background: Pulmonary hamartomas are benign tumors that occur in the parenchyma or in the bronchi. They present as a solitary pulmonary nodule(SPN) or as a cause of bronchial obstruction. The incidence, once minimal, is increasing in Korea. To get clinical spectrum about the tumor, we analyzed all the reported cases in Korea since 1964. Methods: We reviewed the clinical, radiological and pathological findings of 13 patients of intrapulmonary or endobronchial hamartomas in Severance Hospital and of 38 reported cases in Korea published in literatures from 1964 to 1992 retrospectively. Results: Including 17 endobronchial hamartomas, 54 cases were studied. There were 25 men and 29 women, with a mean age of 47.2 years; 45.3 years in endobronchial type and 51.3 years in parenchymal type. Pulmonary symptoms were present in 8 patients (22%) of intrapulmonary type and in all patients of endobronchial type: cough (65%), dyspnea (53%), sputum (35%), fever (29%) in order. On chest X-rays, atelectasis was seen in 10 patients (59%) in endobronchial type; but SPN was noted in 36 patients (97%) of intrapulmonary type. Calcification was present in 7 intapulmonary hamartomas (23%); but is in 2 endobronchial hamartomas (12%). The diagnostic yield was 6 out of 14(43%) in endobronchial ones; 4 out of 7(57%) in intrapulmonary ones. Fifty patients underwent operations as follows: lobectomy (28), enucleation (8), resection (8), bilobectomy (4), pneumonectomy (2). The hamartomas were 1.2 times more common in the right lung; mean transverse diameter at the time of operation was 2.3 cm in endobronchial type, 3.8 cm in intrapulmonary ones. Chondroid components were present in 11(65%) of 17 endobronehial ones but in 30(91%) of 33 intrapulmonary hamartomas. No malignant changes were seen perioperative period and up to early 1993. Conclusion: The younger age in endobronchial hamartomas, the preponderance of the female sex and the more incidence in the right lung, and the diagnostic choice of lobectomies were different from the studies of the Western countries.

• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.303-314
• /
• 1989

The electrum-silver-sulfide mineralization of the Geojae island area was deposited in three stages (I, II, and carbonate) of quartz and calcite veins that crosscut Late Cretaceous volcanic rocks and granodiorite(83 m.y.). Stages I and II were terminated by the onset of fractunng and breCCIation events. Fluid inclusion data suggest that the gold-sulfide-bearing stages I and II each evolved from an initial high temperature( near $370^{\circ}C$) to a later low temperature(near $200^{\circ}C$). Each of those stages represented a separate mineralizing system which cooled prior to the onset of the next stage. The relationship between homogenization temperature and salinity in stages I and II suggests a complex history of boiling, cooling and dilution. Evidence of boiling indicates a pressure of < 100 bars, corresponding to a depth of 500 to 1,250m assummg hthostatlc and hydrostatic pressure regimes, respectively. Fluid inclusion and mineralogical evidence suggest that the electrum-silver mineralization was deposited at a temperature of $220-260^{\circ}C$ from ore fluids with salinities between 1.9 and 8.1 equivalent wt.% NaCl. Total sulfur concentration is estimated to be $10^{-3}$ to $10^{-4}$ molal. The estimated $fs_2$ and $fo_2$ range from $10^{-11.8}$ to $10^{-14}$ atm and $10^{-35}$ to $10^{-36}$ atm, respectively. The chemical conditions indicate that the dominant sulfur species in the ore forming fluids was a reduced form($H_2S$). Rapid cooling and dilution of ore-forming fluids by mixing with less-evolved meteoric waters led to gold-silver deposition through the breakdown of the bisulfide complex($Au(HS)_2$) as the activity of $H_2S$ decreased.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.4
• /
• pp.211-237
• /
• 2000

Major element zoning has been analyzed in garnet porphroblasts obtained from the Grt-St and Ky-Grt-St grade assemblages in Zones I on the northern flank of the Pelham Dome, north central Massachusetts. These porphyroblasts grew during multiple phases of deformation and meta-morphism revealed by the inclusion trail geometry plus the chemical zoning patterns within garnet porphyroblasts. Unusual zoning patterns, including zoning reversals and gradient changes in XMn, zlgzag patterns in Fe/(Fe +Mg) and staircase-shaped patterns in XCa, are coincident with textural truncations and other changes in microstructure within the garnet porphrublasts. Chemical variations in plagioclase, biotite, muscovite and staurolite combined with inclusion trail geometry and petrography reveal that the garnet zoning patterns are modified by combinations of the following. (1) Uni-and divariant reactions involving garnet consumption(Grt+ Chl+Ms=St+Bt+Qtz + $H_2$O) and production(St+Ms + Qtz= Bt+ Grt +A1$_2$$SiO_{5}$ + $H_2$O). (2) Deformation induced episudic ionit dissolution, preferential diffusion and re-distribution during foliation development. (3) P-T changes during growth of the porphyroblasts. The P-T paths combined with petrographic and inclusion trail morphology observations consist of two pattens; (1) heating/compression during NW-SE shortening; and (2) decompression with cooling during NNW-SSE shortening. Based on temperature-time(T-t) geochronological data and late-Paleozoic tectonic model, Alleghanian metamorphism, which is the result of heterogeneous shearing concentrated along the boundary between the Abalone Terrane(Pelham dome) and cover rocks(Bronson Hill Terrane), has produced Ky-St-Ms mineral assemblage during Pennsylvanian(290-300 Ma) in Shutesbury area. However, temperature of alleghanian metamorphism was not high enough to form garnet and staurolite in the Northfiled syncline area. Alleghanian metamorphism has affected only the matrix due to heterogeneous shearing in the study area.