• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1005-1008
• /
• 2009

In this study, adaptively coupled plasma (ACP) source was used for dry etching of $Al_2O_3$ thin film. During the etching process, the wafer surface temperature is an important parameter to influent the etching characteristics. Therefore, the experiments were carried out in ACP to measuring the etch rate, the selectivities of $Al_2O_3$ thin film to mask materials and the etch profile as functions of $Cl_2$/Ar gas ratio and substrate temperature. The highest etch rate of $Al_2O_3$ was 65.4 nm/min at 75% of $Cl_2/(Cl_2+Ar)$ gas mixing ratio. The etched profile was characterized using field effect scanning electron microscopy (FE-SEM). The chemical states of $Al_2O_3$ thin film surfaces were investigated with x-ray photoelectron spectroscopy (XPS).

• 한국표면공학회지
• /
• 제56권3호
• /
• pp.201-207
• /
• 2023

Eu³⁺-doped SnO² (SnO²:Eu³⁺) phosphor thin films were grown on quartz substrates by radio-frequency magnetron sputtering. The deposition temperature was varied from 100 to 400 ℃. The X-ray diffraction patterns showed that all the thin films had two mixed phases of SnO₂ and Eu₂Sn₂O₇. The 880 nmthick SnO²:Eu³⁺ thin film grown at 100 ℃ exhibited numerous pebble-shaped particles. The excitation spectra of SnO²:Eu³⁺ thin films consisted of a strong and broad peak at 312 nm in the vicinity from 250 to 350 nm owing to the O^2--Eu3+ charge transfer band, irrespective of deposition temperature. Upon 312 nm excitation, the SnO²:Eu³⁺ thin films showed a main emission peak at 592 nm arising from the ⁵D₀→⁷F₁ transition and a weak 615 nm red band originating from the ⁵D₀→⁷F₂ transition of Eu³⁺. As the deposition temperature increased, the emission intensities of two bands increased rapidly, approached a maximum at 100 ℃, and then decreased slowly at 400 ℃. The thin film deposited at 200 ℃ exhibited a band gap energy of 3.81 eV and an average transmittance of 73.7% in the wavelength range of 500-1100 nm. These results indicate that the luminescent intensity of SnO²:Eu³⁺ thin films can be controlled by changing the deposition temperature.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권4호
• /
• pp.336-343
• /
• 1996

We have studied the preparation and the properties of $Ba_{1-x}$Sr$_{x}$TiO$_{3}$(BST) thin films by using the sol-gel method. Through the comparison of the effects of various solvents and additives in making solutions, we establish the production method of the stable solution which generates the high quality of BST film. We also set up the heat-treatment conditions for depositing the BST thin film through the TGA and XRD analyses. Through the comparison of the surface conditions of BST films deposited on Pt/Ta/SiO$_{2}$/Si and Pt/Ti/SiO$_{2}$/Si substrates, we find that Ta is more efficient diffusion barrier of Si than Ti so that Ta layer prevents the formation of hillocks. We fabricate the planar type capacitor and measure the dielectric properties of the BST thin film deposited on the Pt/Ta/SiO$_{2}$/Si substrate. Dielectric constant and dielectric loss tangent at 1V, 10kHz, and leakage current density at 3V of the BST thin film are 339, 0.052 and 13.3.mu.A/cm$^{2}$, respectively.ely.

• 한국세라믹학회지
• /
• 제45권3호
• /
• pp.139-141
• /
• 2008

The piezoelectric properties of tetragonal 0.88Pb$(Zn_{1/3}Nb_{2/3)O_3-0.12PbTiO_3$ single crystals are characterized along the <111> direction, which composed the engineering domain configuration in the tetragonal phase. The <111>-oriented crystal possessed smaller $d_{33}$ values compared to the crystal along the <001> spontaneous polarization direction. Based on phenomenological theory, it is shown that the engineering domain configuration does not enhance the piezoelectric constant in tetragonal 0.88Pb$(Zn_{1/3}Nb_{2/3)O_3-0.12PbTiO_3$ single crystals. In addition, the electrostrictive coefficients of $Q_{12}=-0.03706m^4/C^2,\;Q_{11}=0.10765m^4/C^2,\;and\;Q_{44}=0.02020m^4/C^2$ of tetragonal 0.88PZN-0.12PT single crystals were calculated.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.1-5
• /
• 2017

Encapsulation of organic based devices is essential issue due to easy deterioration of organic material by water vapor. Thin layer of encapsulation film is required to preserve transparency yet protecting materials in it. Atomic layer deposition(ALD) is a promising solution because of its low temperature deposition and quality of the deposited film. $Al_2O_3$ or $Al_2O_3/TiO_2/Al_2O_3$ multilayer film has shown excellent environmental protection characteristics despite of thin thicknesses of the films. $Al_2O_3/TiO_2/Al_2O_3$ multilayer and 1.5 dyad layer of $Al_2O_3/polymer/Al_2O_3$ deposited by ALD was measured to have water vapor transmittance rate(WVTR) well below the detection limit($5.0{\times}10^{-5}g/m^2day$) of MOCON Aquatran 2 equipment.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1180-1186
• /
• 2001

고진공 저항 가열식 증발 증착기를 이용하여 약 1$mu extrm{m}$ 두께의 W $O_3$-Sn $O_2$박막 가스센서를 제작하였다. 50$0^{\circ}C$에서 4시간동안 공기중 열처리한 다음, 제조된 박막의 결정성과 미세구조를 관찰하였다. 100 ppm의 산화성 가스인 N $O_2$와 환원성 가스인 CO 가스에 대한 가스 감응 특성을 측정한 결과, N $O_2$가스에 대한 감도( $R_{gas}$/ $R_{air}$)는 기판온도 25$0^{\circ}C$에서 W $O_3$박막이 약 1000으로서 가장 높았으며, CO 가스 감도는 기판온도 15$0^{\circ}C$~25$0^{\circ}C$ 범위에서 약 0.25로 가장 양호하였다.하였다.

• 열처리공학회지
• /
• 제14권3호
• /
• pp.151-154
• /
• 2001

$TiO_2$ thin film has wide application because of its high capacitanca, reflection, and good transmissivity in visible range. $TiO_2$ thin film can be made by thermal deposition method, reactive evaporation method, activated reactive evaporation(ARE) method. In the case of thermal deposition, the oxygen deficiency can occur because the melting point of Ti is very high. While in the case of reactive evaporation, high density $TiO_2$ can not be made, because reactive gas($O_2$) and evaporated material(Ti) are not fully combined, activated reactive evaporation, $TiO_2$ is easily deposited at lower gas pressure compared with reactive evaporation because the ionized reactive gas is made by plasma. Therefore, activated reactive evaporation is very useful to deposit the material having the high melting point. In this work, we formed $TiO_2$ thin film by activated reactive evaporation method. The surface of $TiO_2$ thin film was analyzed by X-ray photoelectron spectroscopy. The surface morphology which was analyzed by atomic force microscopy(AFM) shows that feature of the film surface is uniform. The dielectric capacitance, withstanding voltage were $600{\mu}F/cm^2$, 0.4V respectively. In further work, we can increase the withstanding voltage by improving the deposition parameter of substrates.

• 반도체디스플레이기술학회지
• /
• 제14권3호
• /
• pp.33-36
• /
• 2015

It has increased several decades in the field of Indium Tin Oxide (ITO) transparent thin film, However, a major problem with this ITO thin film application is high cost compared with other transparent thin film materials[1]. So far, in order to overcome this disadvantage, we show that a transparent ITO/Ag/i-ZnO multilayer thin film electrode would be more cost-effective and it has not only highly transparent but also conductive properties. The aim of this research has therefore been to try and establish how ITO/Ag/i-ZnO multilayer thin film would be more effective than ITO thin film. Herein, we report the properties of ITO/Ag/i-ZnO multilayer thin film by using optical spectroscopic method and measuring sheet resistance. At a certain total thickness of thin film, sheet resistance of ITO/Ag/i-ZnO multilayer was drastically decreased than ITO layer approximately $40{\Omega}/{\Box}$ at same visible light transmittance. (minimal point $5.2{\Omega}/{\Box}$). Tendency, which shows lowly sheet resistive in a certain transmittance, has been observed, hence, it should be suitable for transparent electrode device.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.278-284
• /
• 1995

Thin fihn SnO$_{2}$ Gas Sensor was fabricated by electron-beam evaporation system and the target made by general firing method for the purpose of detecting gas components in air, especially methane gas. SnO$_{2}$ thin film was prepared on the polished alumina substrate which Pt interdigital electrode was precoated. The effects of annealing temperature and substrate temperature on the structural properties of SnO$_{2}$ thin film on glass were investigated using the X-ray diffraction. The good crystalline structure is formed when substrate temperature is 150[.deg. C] and annealing condition is 550[.deg. C], 1[hour]. And the sensing properties at various thickness of the SnO$_{2}$ thin film and the effects of PdCI$_{2}$ addition were also investigated. The good result is showed when the thickness is below 1000[.angs.] and the quantity of PdCI$_{2}$ addition is 4[wt%]. The thickness of SnO$_{2}$ thin film was measured by .alpha.-step and Elliopsometer.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.345-351
• /
• 2017

A double-layered anti-reflective coating with hydrophilic/abrasion-resistant properties was studied using anatase titanium dioxide($TiO_2$) and silicon oxycarbide($SiO_xC_y$) thin film. $TiO_2$ and $SiO_xC_y$ thin films were sequentially deposited on a glass substrate by DC sputtering and PECVD, respectively. The optical properties were measured by UV-Vis-NIR spectrophotometer. The abrasion-resistance and the hydrophilicity were observed by a taber abrasion tester and a contact angle analyzer, respectively. The $TiO_2/SiO_xC_y$ double-layer thin film had an average transmittance of 91.3%, which was improved by 10% in the visible light region (400 to 800 nm) than that of the $TiO_2$ single-layer thin film. The contact angle of $TiO_2/SiO_xC_y$ film was $6.9^{\circ}$ right after UV exposure. After 9 days from the exposure, the contact angle was $10.2^{\circ}$, which was $33^{\circ}$ lower than that of the $TiO_2$ single-layer film. By the abrasion test, $SiO_xC_y$ film showed a superior abrasion-resistance to the $TiO_2$ film. Consequently, the $TiO_2/SiO_xC_y$ double-layer film has achieved superior anti-reflection, hydrophilicity, and abrasion resistance over the $TiO_2$ or $SiO_xC_y$ single-layer film.