• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.281-287
• /
• 2002

The stochiometric composition of AgGaS$_2$ polycrystal source materials for the AgGaS$_2$/GaAs epilayer was prepared from horizontal furnace. From the extrapolation method of X-ray diffraction patterns it was found that the polycrystal AgGaS$_2$ has tetragonal structure of which lattice constant a$\sub$0/ and c$\sub$0/ were 5.756 ${\AA}$ and 10.305 ${\AA}$, respectively. AgGaS$_2$/GaAs epilayer was deposited on throughly etched GaAs(100) substrate from mixed crystal AgGaS$_2$ by the Hot Wall Epitaxy (100) system. The source and substrate temperature were 590$^{\circ}C$ and 440$^{\circ}C$ respectively. The crystallinity of the grown AgGaS$_2$/GaAs epilayer was investigated by the DCRC (double crystal X-ray diffraction rocking curve). The optical energy gaps were found to be 2.61 eV for AgGaS$_2$/GaAs epilayer at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation, then the constants in the Varshni equation are given by ${\alpha}$ : 8.695${\times}$10$\^$-4/ eV/K, and ${\beta}$ = 332 K. From the photocurrent spectra by illumination of polarized light of the AgGaS$_2$/GaAs epilayer, we have found that crystal field splitting ΔCr was 0.28 eV at 20 K. From the PL spectra at 20 K, the peaks corresponding to free and bound excitons and a broad emission band due to D-A pain are identified. The binding energy of the free excitons are determined to be 0.2676 eV and 0.2430 eV and the dissociation energy of the bound excitons to be 0.4695 eV.

• 전자공학회논문지A
• /
• 제30A권10호
• /
• pp.33-40
• /
• 1993

A reflection type 16x8 S-SEED array from LP(Low Pressure)-MODVD-grown GaAs/AlGaAs extremely shallow quantum well(ESQW) structures, with 4% Al fraction, has been fabricated. Its intrinsic region consists of 50 pairs of alternating 100.angs. GaAs and 100.angs. $Al_{0.04}$Ga$_{0.96}$As layers. A multilayer reflector stack of $Al_{0.04}$/Ga$_{0.96}$ As(599$\AA$)/AlAs(723$\AA$) was incorporated for the reflection plane below the p-i-n structures. The device processing after the MOCVD growth includes the mesa etching, isolation etching, insulator deposition, p & n metallization, and AR(Anti-Reflection) coating. For switching characteristics of the S-SEED in the form of p-i-n ESQW diode, the maximum optical negative resistance was observed at 856nm. Reflectance measurements showed a change from 15.6% to 43.3% for +0.9V to -6V bias. The maximum contrast ration of the S-SEED array was 2.0 and all the 128 devices showed optical bistability with contrast ratios over 2.4 at 5V reverse bias.

• 한국진공학회지
• /
• 제22권6호
• /
• pp.327-334
• /
• 2013

InAs/GaSb 제2형 응력 초격자(strained layer type II superlattice, T2SL)을 이용한 nBn 구조 장적외선 검출소자의 설계 및 제작을 하였다. InAs와 GaSb 두께에 따른 T2SL 구조의 장적외선 밴드갭 에너지를 Kronig-Penney 모델을 이용하여 계산하였다. 소자의 암전류 밀도를 줄이기 위해서, nBn 구조에서 장벽층인 $Al_{0.2}Ga_{0.8}Sb$ 성장 중에 Te 보상도핑(compansated doping)을 하였다. 온도(T) 80 K 및 인가전압($V_b$) -1.5 V에서, 반응스펙트럼 측정을 통한 소자의 차단파장은 ${\sim}10.2{\mu}m$ (~0.122 eV)로 나타났다. 또한 온도 변화에 따른 암전류 측정으로부터 도출된 활성화 에너지는 0.128 eV로 계산 되었다. T=80 K 및 $V_b$=-1.5 V에서 암전류는 $1.0{\times}10^{-2}A/cm^2$으로 측정되었다. 흑체복사 적외선 광원을 이용한 반응도(Responsivity)는 소자 온도 80 K 및 인가전압 -1.5 V의 조건에서 0.58 A/W로 측정되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.56-59
• /
• 2004

The stochiometric composition of $AgGaS_2$ polycrystal source materials for the $AgGaS_2/GaAs$ epilayer was prepared from horizontal furnace. From the extrapolation method of X-ray diffraction patterns it was found that the polycrystal $AgGaS_2$ has tetragonal structure of which lattice constant $a_0$ and $c_0$ were 5.756 ${\AA}$ and 10.305 ${\AA}$, respectively. $AgGaS_2/GaAs$ epilayer was deposited on throughly etched GaAs (100) substrate from mixed crystal $AgGaS_2$ by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $590^{\circ}C$ and $440^{\circ}C$ respectively. The crystallinity of the grown $AgGaS_2/GaAs$ epilayer was investigated by the DCRC (double crystal X-ray diffraction rocking curve). The optical energy gaps were found to be 2.61 eV for $AgGaS_2/GaAs$ epilayer at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation, then the constants in the Varshni equation are given by ${\alpha}=8.695{\times}10^{-4}eV/K$, and $\beta$=332 K. From the photocurrent spectra by illumination of polarized light of the $AgGaS_2/GaAs$ epilayer, we have found that crystal field splitting $\Delta$ Cr was 0.28 eV at 20 K. From the PL spectra at 20 K, the peaks corresponding to free and bound excitons and a broad emission band due to D-A pairs are identified. The binding energy of the free excitons are determined to be 0.2676 eV and 0.2430 eV and the dissociation energy of the bound excitons to be 0.4695 eV.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.124-127
• /
• 2011

Quantum dots were designed within a GRIN-SCH(Graded index - Separate confinement Heterostructure) heterostructure to create a high power InAlAs/AlGaAs laser diode. 808 nm light emission was with a quantum dot composition of In0.665Al0.335As and wetting layer composition of Al0.2Ga0.8As by LASTIP simulation software. Typical characteristics of GRIN structures such as high confinement ratios and Gaussian beam profiles were shown to still apply when quantum dots are used as the active media. With a dot density of 1.0x1011 dots/cm2, two quantum dot layers were found to be good enough for low threshold, high-power laser applications.

• 대한전자공학회논문지SD
• /
• 제48권11호
• /
• pp.1-8
• /
• 2011

트랜지스터의 최대 출력 성능을 제한하는 요소 중 가장 중요한 하나가 항복 전압이다. GaAs 기판 위에 점진적으로 성장된 메타몰픽(Metamorphic) InAlAs/InGaAs HEMTs(MHEMT)는 InP 기판 위에 성정한 HEMT에 비해 비용 측면에서 특히 장점을 가지고 있다. 그러나 GaAs 나 InP 기반의 HEMT 소자들은 모두 우수한 마이크로파 및 밀리미터파 주파수 특성 및 이에 따른 저잡음 특성에 비해 낮은 항복전압으로 인해 파워 소자로서는 중간출력 정도의 소자로서만 사용 가능하다. 이러한 HEMT 소자의 항복 전압을 개선하기 위하여 본 논문에서는 InAlAs/$In_xGa_{1-x}As$/GaAs MHEMT 소자들의 항복 특성을 시뮬레이션하고 분석하였다. 2차원 소자 시뮬레이터의 hydrodynamic 전송 모델을 사용하여 $In_{0.52}Al_{0.48}As/In_{0.53}Ga_{0.47}As$ 이종접합 구조를 갖는 제작된 0.1-${\mu}m$ ${\Gamma}$-gate MHEMT 소자에 대하여 파라미터 보정 작업을 수행한 후 항복 특성에 영향을 주는 요소들을 분석하였다. 깊은 준위 트랩 효과를 고려한 충돌 이온화 및 게이트 전계를 분석하였고, 인듐(In) 몰 성분 변화에 따른 $In_xGa_{1-x}As$ 채널에서의 항복 특성 예측을 위한 충돌 이온화 계수를 경험적으로 제안 적용하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.289-290
• /
• 2006

We report a study of Zn(S)Se/GaAs heterojunction solar cells grown by molecular beam epitaxy (MBE). Zn(S)Se/GaAs heterostructures prepared under different conditions were characterized in-situ by reflection high-energy electron diffraction (RHEED). Structural and electrical properties were investigated with double crystal X-ray diffraction and current-voltage characteristics, respectively. The fabricated $n-ZnS_{0.07}Se_{0.93}/p-GaAs$ solar cell (SC #2) exhibited open circuit voltage($V_{oc}$) of 0.37 V, short circuit current($I_{sc}$) of $1.7{\times}10^{-2}$ mA, fill factor of 0.62 and conversion efficiency of 7.8 % under 38.5 $mW/cm^2$ illumination.

• 한국작물학회지
• /
• 제42권4호
• /
• pp.384-391
• /
• 1997

산형과 약용작물인 시호의 재배에서 나타나는 문제점의 하나는 발아 불량에 의한 입묘 실패라할 수 있다. 따라서 파종 전 종자에 손쉽게 처리할 수 있는 방법을 모색하여 입묘율을 증진할 수 있는가에 대한 정보를 얻고자 재래시호와 최근에 육성된 장수시호를 공시하여 치상 전의 $GA_3$ 처리 [0(물), 0.01, 0.1mM (농도) : 2, 4, 8일 (기간)] 또는 저온처리기간 (0, 4, 8주)에 가하여지는 광질처리 (적색광, 백색광, 암)가 발아율에 미치는 영향을 조사하였던 바 그 결과를 요약하면 다음과 같다. 1. 요인별 평균 발아율은 공시품종, GA$_3$ 침지기간 또는 광질처리에 의하여 영향을 받는 것으로 분석되었던 반면, 물과 $GA_3$ 처리 또는 $GA_3$ 처리농도간에는 차이가 없었다. 2. 물로 침지하면서 광질처리를 가할 경우 평균발아율은 장수시호보다 재래시호에서 높았고, 2~4일간 침지하거나 침지과정 중 적색광을 처리할 경우 발아가 향상ㆍ촉진되는 경향을 보였다. 3. 공시품종별 발아율에서 재래시호는 광질처리간에 차이가 없었으나, 2일간 물로 침지하면서 광질처리를 가할 경우 발아율이 가장 높았던 반면, 장수시호는 4일간 침지하면서 적색광을 가할 경우 가장 높았다. 4. 치상 전 저온처리를 가하지 않는 상태에서 광질처리를 할 경우 발아율이 가장 높았으며 발아과정에서는 암상태보다는 백색광에서 발아율이 향상되었다. 5. 저온처리를 가하지 않은 경우 평균 발아율은 광질처리간 차이가 없고, 장수시호보다는 재래시호에서 높다고 할지라도 장수시호는 2일간 물에 침지시킨 후 발아과정에서 빛이 있어야 발아율이 향상될 것으로 보인다.

• Applied Science and Convergence Technology
• /
• 제26권4호
• /
• pp.79-85
• /
• 2017

The crack-free AlGaN template has been successfully grown by using selective area growth with triangular GaN facet. The triangular GaN stripe structure was obtained by vertical growth rate enhanced mode with low growth temperature of $950^{\circ}C$ and high growth pressure of 500 torr. The lateral growth rate enhanced mode of AlGaN for crack-free and flat surface was also investigated. Low pressure of 30 torr and high V/III ratio of 4400 were favorable for lateral growth of AlGaN. It was confirmed that the $4{\mu}m$ -thick $Al_{0.2}Ga_{0.8}N$ was crack-free over entire 2-inch wafer. The dislocation density of $Al_{0.2}Ga_{0.8}N$ was as low as ${\sim}7.6{\times}10^8/cm^2$ measured by cathodoluminescence. Based on the high quality AlGaN with low dislocation density, the ultraviolet laser diode epitaxy with cladding, waveguide and GaN/AlGaN multiple quantum well (MQW) was grown by metalorganic chemical vapor deposition. The stimulated emission at 349 nm with full width at half maximum of 1.8 nm from the MQW was observed through optical pumping experiment with 193 nm KrF laser. We also have fabricated the deep ridge type ultraviolet laser diode (UV-LD) with $5{\mu}m-wide$ and $700{\mu}m-long$ cavity for electrical properties. The turn on voltage was below 5 V and the resistance was ${\sim}55{\Omega}$ at applied voltage of 10 V. The amplified spontaneous emission spectrum of UV-LD was also observed from pulsed current injection.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.26-30
• /
• 2015

The crystallographic and magnetic properties of gallium-substituted cobalt ferrite ($CoGa_xFe_{2-x}O_4$) were investigated. The new material was synthesized using conventional ceramic methods, with gallium substituted for ferrite in the range of x = 0.0 to 1.0, in steps of 0.2. X-ray diffraction and M$\ddot{o}$ssbauer spectroscopy were used to confirm the presence of crystallized particles in the $CoGa_xFe_{2-x}O_4$ ferrite powders. All of the samples exhibited a single phase with a spinel structure, and the lattice parameters decreased as the gallium content increased. The particle size of the samples also decreased as gallium increased. For $x{\leq}0.4$, the M$\ddot{o}$ssbauer spectra of $CoGa_xFe_{2-x}O_4$ could be fitted with two Zeeman sextets, which are the typical spinel ferrite spectra of $Fe^{3+}$ with A- and B-sites. However, for $x{\geq}0.6$, the M$\ddot{o}$ssbauer spectra could be fitted with two Zeeman sextets and one doublet. The variation in the M$\ddot{o}$ssbauer parameters and the absorption area ratio indicated a cation distribution of $(Co_{0.2-0.2x}Ga_xFe_{0.8-0.6x})[Co_{0.8+0.2x}Fe_{1.2-0.4x}]O_4$, and the magnetic behavior of the samples suggested that the increase in gallium content led to a decrease in the saturation magnetization and in the coercivity.