• 제목/요약/키워드: $HoMnO_3$

검색결과 310건 처리시간 0.027초

CeMnO3 치환된 (Na0.5K0.5)0.97NbO3 세라믹스의 유전 및 압전 특성 (Dielectric and Piezoelectric Properties of (Na0.5K0.5)0.97NbO3 Ceramics Substituted with CeMnO3)

  • 오영광;류주현;마석범;정영호
    • 한국전기전자재료학회논문지
    • /
    • 제24권3호
    • /
    • pp.194-199
    • /
    • 2011
  • In this study, non-stoichiometric 1-x$[(K_{0.5}Na_{0.5})_{0.97}(Nb_{0.96}Sb_{0.04})O_3]$ + x $CeMnO_3$ + 0.8 mol%CuO + 0.2 wt% $Ag_2O$ (x=0, 0.005) ceramics were prepared by a conventional mixed oxide and carbonate method, their dielectric and piezoelectric properties were investigated with the variations of sintering temperature. As $CeMnO_3$ substitution incereased, the density, piezoelectric constant($d_{33}$) and dielectric constant($\varepsilon_r$) were increased and the mechanical quality factor(Qm) was decreased. At the sintering temperature of $1100^{\circ}C$, the density, electromechanical coupling factor($k_p$), dielectric constant($\varepsilon_r$) and piezoelectric constant($d_{33}$) of 0.5mol% $CeMnO_3$ specimen showed the optimun values of 4.475 $g/cm^2$, 0.437, 552 and 166 pC/N, respectively. However, the mechanical quality factor($Q_m$) showed the minimum value of 380.

Mn-Zn Ferrites 의 자기적 성질에 미치는 $V_2O_5$의 첨가효과 (Effects of $v_2O_5$ Addition on the Magnetic Properties of Mn-Zn Ferrites)

  • 조덕호
    • 한국자기학회지
    • /
    • 제2권3호
    • /
    • pp.222-227
    • /
    • 1992
  • 소량의 $V_2O_5$ 첨가가 Mn-Zn 훼라이트의 치밀화, 미세조직 및 자기적 성질에 미치는 영향에 대하여 연구하였다. 최대밀도는 0.1 wt% $V_2O_5$ 첨가시 관측되며, $V_2O_5$ 첨가는 불균일입자성장을 억제하는 것으로 확인되었다. 초투자율은 0.1 wt% $V_2O_5$ 첨가시 최대값을 나타내었고, 손실은 0.03 wt% $V_2O_5$ 첨가시 최소값을 나타내었다. 소량의 $V_2O_5$ 는 Mn-Zn 훼라이트에 고용되지만, 일정량 이상이 되면 2차상을 형성하여 입계에 편석하였다.

  • PDF

망간 산화물 촉매상에서 일산화탄소의 산화반응 : 소성온도의 영향 (CO Oxidation Over Manganese Oxide Catalysts: Effect of Calcination Temperature)

  • 박정현;김윤정;조경호;김의식;신채호
    • 청정기술
    • /
    • 제17권1호
    • /
    • pp.41-47
    • /
    • 2011
  • 순수한 $MnO_2$ 산화물을 과망간산칼륨과 망간아세테이트를 사용하여 침전법으로 제조하였고 소성온도를 달리하여 CO 산화반응을 수행하였다. 촉매의 물리화학적 특성을 알아보기 위하여 XRD, $N_2$ 흡착, $H_2-TPR$, CO-TPD 등의 특성분석을 수행하였다. $MnO_2$-300 촉매는 9nm 크기 근처의 좁은 기공크기 분포로 존재하며 $181m^2/g$의 높은 비표면적을 보였다. XRD와 $H_2-TPR$ 분석으로 $MnO_2$ 촉매는 $Mn^{4+}$$Mn^{3+}$의 산화상태임을 확인하였다. CO-TPD 분석으로 소성온도가 높아질수록 탈착되는 $CO_2$의 양이 감소하는 것을 확인하였다. $MnO_2$ 촉매의 소성온도에 따른 최적 활성에서는 $300^{\circ}C$에서 소성한 촉매가 가장 좋은 활성을 나타냈으며, $200^{\circ}C$ 이하에서 100%의 CO 전환율을 보였다. 수분 존재하의 CO 산화반응은 활성점에 $H_2O$와 CO의 경쟁 흡착으로 촉매의 활성을 감소시켰으며 수분제거 시 활성이 건조조건과 동일하게 회복되었다.

직류 전계에 의한 Acceptor 첨가 BaTiO3의 유전특성 열화 현상 (Capacitance Aging Behavior of Acceptor-Doped BaTiO3 under DC Electrical Field)

  • 한동우;한영호
    • 한국세라믹학회지
    • /
    • 제46권2호
    • /
    • pp.219-223
    • /
    • 2009
  • Effects of MgO or $R_2O_3$(R:Dy, Ho, Yb) on the capacitance aging behavior of multilayer ceramic capacitors (MLCCs) based on $BaTiO_3$ dielectrics under DC electrical fields has been studied. At a DC field of 1 $V{/\mu}m$, the capacitance of MLCC specimens dropped immediately in a very short period (<10 s, the first stage) and then decreased continuously with time (the second stage). Mn doping significantly increased the aging rate in the second stage. The addition of MgO or $R_2O_3$ notably decreased the second stage aging rate of Mn-doped specimens. Yb doping gives rise to the lowest aging rate in the second stage, which is due to the larger population of defect dipoles associated with oxygen vacancies.

Mn Oxide의 첨가에 따른 PSS-PT-PZ 세라믹의 초전특성 (Pyroelectric Properties of Modified PZT Ceramics with $MnO_2$ Addition)

  • 신상현;김영훈;박기운;강동헌;김영호;길상근
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
    • /
    • pp.746-748
    • /
    • 2002
  • The effect of $MnO_2$ addition in $0.05Pb(Sn_{0.5}Sb_{0.5})O_3-0.8PbZrO_3-0.15PbTiO_3$(0.05PSS-0.8PZ-0.15PT) ceramics on crystal structure and electrical properties were studied. The sintering temperature and time were $1230^{\circ}C{\sim}1270^{\circ}C$ and 2hr, respectively. Then crystal structure, dielectric and pyroelectric properties were investigated. All the poled specimens showed the lower dielectric constant and $tan{\delta}$ than the unpoled specimens. Dielectric constant at 1kHz of the 0.05PSS-0.8PZ-0.15PT(MnO2 0.3wt%) system specimen sintered at $1250^{\circ}C$ for 2hr were 270 and showed the lowest $tan{\delta}$ of 0.2% after poling of $2kV_{DC}/mm$ at $150^{\circ}C$ for 30 minutes. Pyroelectric coefficient was maximum value of $50nC/cm^2K$ and Curie temperature was $224^{\circ}C$.

  • PDF