• Journal of Environmental Science International
• /
• v.8 no.6
• /
• pp.685-690
• /
• 1999

The pollution characteristics of groundwaters in Taegu City and correlation coefficients(r) between water pollution indicators were investigated for two years from January 1996 to December 1997. Volatile organic compounds such as TCE(tri-chloroethylene), PCE(tetrachloroethylene), l,l,l-trichloroethane, THM(trihalo-methane), dichloromethane, pesticides such as diazinon, parathion, malathion, and toxic inoganic matters such as As, Hg, Se, Pb, Cd, $Cr_6^+,$ CN were not detected in the groundwaters. Mean values of groundwater pollution indicators were below drinking-water standards, but hardness, $KMnO_4-C(potassium$ permanganate consumption), evaporate residues, $SO_4^{-2},\;Fe,\;NO_3^{-}-N,$ color and turbidity exceeded a little in some samples. As groundwater became deeper, hardness and evaporate residues remarkably increased, but $KMnO_4-C,\;NO_3^{-}-N,\;Cl-,$ color, turbity and bacteria decreased. $KMnO_4-C,$ evaporate residues, $Cl^-\;and\;SO_4^{-2}$ were very high at industrial and commercial areas, and $NO_3^--N$ and $NH_4^+-N$ were very high at agricultural and forest areas. It showed high positive significances in the relationships between hardness and each of evaporate residues, $SO_4^{-2}$, Zn and Mn, $KMnO_4-C$ and each of color, turbidity and Zn, color and each of turbidity, Cu, Zn and Mn, turbidity and each of Fe, Cu, Zn and Mn, and evaporate residues and each of $Cl^-,\;SO_4^{-2}$ and Zn.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.12-19
• /
• 2001

In this study, the physical properties of the piezoelectric sounder with metal-piezoelectric ceramics were analyzed. The dielectric and piezoeletric properties of 0.5wt% MnO$_2$ and NiO doped 0.1Pb(Mg$\_$1/3/Nb$\_$2/3/)O$_3$-0.45PbTiO$_3$-0.45PbZrO$_3$ ceramics were investigated aiming at acoustic transducer applications. The acoustic characteristics of a thin circular disc-type with metal-piezoceramics have been investigated. Also, the acoustic characteristics for the geometrical form of case were investigated. The piezoelectric sounder with 200kHz resonant frequency and 20kHz bandwidth was designed by considering the sharp directivity and the sound pressure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.283-286
• /
• 2000

In this study, the acoustic transducer of a thin circular disc-type with PZT/Metal was manufactured. The piezoelectric transducer with 200kHz resonance frequency was designed by considering the sharp directivity and the sound pressure. The dielectric and piezoelectric properties of 0.5 weight percent $MnO_2$ and NiO doped $0.1Pb(Mg_{1/3}Nb_{2/3})O_3-0.45PbTiO_3-0.42PbZrO_3$ ceramics were investigated aiming at acoustic transducer applications. Also, the acoustic characteristics of a thin circular disc-type with metal-piezoceramics have been Investigated.

• Journal of the Microelectronics and Packaging Society
• /
• v.2 no.2
• /
• pp.41-48
• /
• 1995

본 논문에서는 테이프 케스팅법으로 제조한 BaTiO3 계 쉬트형 PTCR 세라믹스의 적기적물성에 대하여 연구하였다. PTCR의 조성은 몰비로 89.9 BaTiO3-0.1Sb2O3-10 CaTiO3-0.05MnO3였고 케스팅용 슬러리의 유기물질은 결합제로 PVB 가소제로는 DBP 용제 로는 에탄올과 톨류엔 그리고 분산제로는 fish oil을 사용하였다. 케스팅하여 얻어진 그린쉬 트를 13$25^{\circ}C$와 135$0^{\circ}C$에서 1시간 소성하여 얻은 쉬트형 PTCR을 온도에 대한 저항 및 복소 임피던스를 측정하고 미세구조를 SEM으로 관찰하여 칩화를 위한 조건들을 검토하였다.

• Journal of the Korean Ceramic Society
• /
• v.44 no.5 s.300
• /
• pp.160-165
• /
• 2007

This research studied the most suitable synthesis condition of mineral pigments of black spinel, which have a stable chromogenic characteristic also ata high temperature of $1400^{\circ}C$ (it is not currently producedin the country) to meet not only functionality of ceramics but also an individual's aesthetic. It was synthesized by the plastic synthetic method on the basis of basic formation of $Fe_2O_3,\;Cr_2O_3$, Quartz, Kaolin, CoO, $MnO_2$, and plasticity was made at $1500^{\circ}C,\;1550^{\circ}C,\;1600^{\circ}C,\;1650^{\circ}C$. We researched the most suitable condition of plasticity and composition which make crystallization of spinel system and chromogenic characteristic close to black in every composition. And for the experiment of application to Zirconia, after adding synthesized pigments to Zirconia and plasticizing them, we analyzed their color and property of matters. The most suitable synthesis conditions of mineral pigments of black spinel system require composition of $Fe_2O_3-32.01%,\;Cr_2O_3-30.47%$, Quartz-9.66%, Kaolin-18.53%, CoO-3.71%, $MnO_2-5.62%$ and condition of plasticity kept for 1 h at $1600^{\circ}C$. When we added pigments synthesized in this way to Zirconia with 5 wt% and plasticized them at $1410^{\circ}C$, the result was that the degree of $strength-32.6kgf/mm^2$, absorptance-0.108%, $luminosity-L^*:37.54,\;color-a^*:1.31,\;b^*:2.61$ and their use suited for artificial jewelry or decoration Zirconia goods.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.499-503
• /
• 2012

The present study is intended to comparatively investigate the changes in microstructure and tensile properties at room and elevated temperatures in commercial AM50(Mg-5%Al-0.3%Mn) and 0.3 wt%CaO added ECO-AM50 alloys produced by permanent mould casting. The typical microstructure of AM50 alloy was distinctively characterized using two intermetallic compounds, ${\beta}(Mg_{17}Al_{12})$ and $Al_8Mn_5$, along with ${\alpha}$-(Mg) matrix in an as-cast state. The addition of a small amount of CaO played a role in reducing dendrite cell size and quantity of the ${\beta}$ phase in the AM50 alloy. It is interesting to note that the added CaO introduced a small amount of $Al_2Ca$ adjacent to the ${\beta}$ compounds, and that inhomogeneous enrichment of elemental Ca was observed within the ${\beta}$ phase. The ECO-AM50 alloy showed higher hardness and better YS and UTS at room temperature than did the AM50 alloy, which characteristics can be mainly ascribed to the finer-grained microstructure that originated from the CaO addition. At $175^{\circ}C$, higher levels of YS and UTS and higher elongation were obtained for the ECO-AM50 alloy, demonstrating that even 0.3 wt%CaO addition can be beneficial in promoting the heat resistance of the AM50 alloy. The combinational contributions of enhanced thermal stability of the Ca-containing ${\beta}$ phase and the introduction of a stable $Al_2Ca$ phase with high melting point are thought to be responsible for the improvement of the high temperature tensile properties in the ECO-AM50 alloy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.178-180
• /
• 2005

In this study, in order to develop multilayer low temperature sintering piezoelectric transformer, $Pb_{0.97}Sr_{0.03}[(Mn_{1/3}Nb_{2/3})x(Zr_{0.48}Ti_{0.52})_{1-x}O_3]+$ 0.25wt% $CeO_2$+0.3 wt% $Nb_2O_5$ system ceramics were fabricated using $Li_2CO_3-CaCO_3$ and CuO as sintering aids and their piezoelectric and dielectric characteristics were investigated with the amount of PMN substitution. With increasing PMN substitution, electromechanical coupling factor kp and dielectric constant were increased.

• Applied Biological Chemistry
• /
• v.38 no.2
• /
• pp.100-105
• /
• 1995

Media optimization for the production of MR-387A and B, novel aminopeptidase M inhibitors by Streptomyces sp. SL-387 isolated from a soil was studied. Optimized medium was consisted of 1% glucose, 3% soybean meal, 0.2% yeast extract, 0.1% beef extract, 0.3% NaCl, 0.01% $K_2HPO_4$, 0.3% $CaCO_3$, 0.001% $MnCl_2{\cdot}4H_2O$, 0.001% $ZnCl_2{\cdot}7H_2O$, and 0.0005% $MgSO_4{\cdot}7H_2O$, and adjusted to pH 7.0 before autoclaving. When the optimized medium was used as a fermentation medium, maximum productivity of MR-387 was reached at 120 hours of fermentation, and total productivity was 909.1 U/ml.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.9
• /
• pp.771-775
• /
• 2007

In this study, in order to develop low temperature sintering ceramics for thickness vibration mode multilayer piezoelectric transformer, $PbTiO_3$ system ceramics were fabricated using $Na_2CO_3,\;Li_2CO_3,\;MnO_2\;and\;Bi_2O_3$ as sintering aids and their dielectric and piezoeletric properties were investigated according to the amount of $Bi_2O_3$ addition. At the sintering temperature of $900^{\circ}C\;and\;Bi_2O_3$ addition of 0.1 wt%, density, grain size, thickness vibration mode eletromechanical coupling factor($k_t$), thickness vibration mode mechanical quality factor($Q_{mt}$) and dielecteic constant(${\varepsilon}_r$) showed the optimum value of $6.94g/cm^3,\;2.413{\mu}m$, 0.497, 3,162 and 209, respectively, for thickness vibration mode multilayer piezoelectric transformer application.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.39-44
• /
• 1989

This experiment was conducted to mature newly reclaimed upland and to increase soybean yield at this upland, Kim Jae, Jeon Buk, Koera from 1987 to 1988. Lime, lime-magnesium and calcium sulfate were applied with two, levels, amount of lime requirement, and 1.5 times of lime requirement. The results were summarized as follows: 1. The yields of soybean among treaments were in order of lime-magnesium 1.5 times, lime 1.5 times, lime-magnesium, calcium sulfate, lime and control with significancy at 1% level. 2. Correlations between yield components and inorganic element contents (T-N, $P_2O_5$, CaO and MgO) in plant at flowering stage were positive, but manganese in plant was negative at 5%, respectively. 3. Correlations, between yields and MgO and CaO contents in plant at flowering stage were positive, but Mn in plant was negative at 5% respectively. 4. Inorganic element contents of the soils at flowering stage were higher than those of before experiment. Correlation between yield and base saturation degree in soil at flowering stage was positive at 5%.