• Title/Summary/Keyword: $H_2O $

Search Result 18,265, Processing Time 0.057 seconds

Effects of pH variation on thermal stability of electrodeposited Ni-$TiO_2$ composite (Ni-$TiO_2$ 전기도금층의 pH에 따른 열적안정성 연구)

  • Kim, Myeong-Jin;Kim, Jeong-Su;Kim, Dong-Jin;Kim, Hong-Pyo
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2011.05a
    • /
    • pp.133-134
    • /
    • 2011
  • 전기도금을 이용하여 $TiO_2$ 입자들을 니켈 도금층에 넣은 Ni-$TiO_2$ 복합체를 만들때 pH, 전류형태에 따른 열적안정성에 대한 영향을 평가하였다. pH 범위는 1, 2, 3.4 였으며, 전류형태는 직류, duty cycle 50%의 펄스를 사용하였다. pH가 낮으면 도금속도는 낮아졌으나 $TiO_2$의 부피분율은 증가하였고, 펄스를 이용하면 도금속도는 증가하였으나 $TiO_2$ 부피분율은 감소하였다. 경도는 pH가 낮으면 상온에서는 낮았으나 고온에서는 상대적으로 경도값이 높았다.

  • PDF

Examination of Berberine Dye using GC-MS after Selective Degradation Treatments (GC-MS를 이용한 Berberine 염료의 퇴화 거동 연구)

  • Ahn, Cheun-Soon
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.33 no.12
    • /
    • pp.2002-2010
    • /
    • 2009
  • The degradation behavior of berberine is examined using GC-MS to select the fingerprint products that can be used to identify berberine dye in badly faded archaeological textiles. A total of $100^{\circ}C$ thermal and $H_2O_2/UV/O_2$ degradation systems were used to degrade berberine chloride 0.1% solution up to 408 hours. The samples were analyzed using the GC-MS. Dihydroberberine, 2-pteridinamine, 6,7-dimethyl-N-[(trimethylsilyl) oxy]-, and 8-methoxy-11-[3-methylbutyl]-11H-indolo[3,2-c]-quinoline, 5-oxide were detected as the major products of thermal degradation and identified as the fingerprint products for berberine dye at the early stage of degradation. Isobenzofuran-1,3-dione,4,5-dimethoxy-, 9H-fluorene,3,6-bis(2-hydroxyethyl)-,1,3-dioxolo[4,5-g]isoquinolin-5(6H)-one,7,8-dihydro-, and 3-tert-butyl-4-hydroxyanisole were detected as the major products generated by the $H_2O_2/UV/O_2$ degradation and identified as the fingerprint products for berberine dye under severe degradation conditions.

The Direct Dissolution of Ion-Exchange Resin by Fenton's Reagent (펜톤시약을 이용한 이온교환수지의 직접분해)

  • Kim, Kil-Jeong;Shon, Jong-Sik;Ryu, Woo-Seog
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.5 no.1
    • /
    • pp.85-90
    • /
    • 2007
  • Fenton's Reagent is applied to directly dissolve the cation-exchange resin, IRN-77. The characteristics of the experimental procedure is to dry the resin first and $FeSO_4$ solution is completely absorbed into the resin, and then $H_2O_2$ is introduced later for an effective reaction between the reagents within the resin. An a characteristic of the dissolution, the lag time is needed for about 1 hour until the main reaction is occurred, which was more affected with the less concentration of $FeSO_4$ and the less initial dose of $H_2O_2$. The dose of $H_2O_2$ was equally divided into the early stage and the later stage after the initial reaction to provide an effective and safe reaction condition. The optimum conditions is appeared that the concentration of $FeSO_4$ is 0.9M and the dose of 15% $H_2O_2$ solution is 6-7 volume for the dissolution of unit weight of IRN-77. The effect of the heating on the lag time was checked and the time could be reduced within 5 minutes at $50^{\circ}C$, which is a relatively low temperature. The large amount of the resin, 5g and 10g, was also completely decomposed by increasing the dose of $H_2O_2$ to 9-10 volume ratio.

  • PDF

Characterization of Methylene Blue Decomposition on Fe-ACF/TiO2 Photocatalysts Under UV Irradiation with or Without H2O2

  • Zhang, Kan;Oh, Won-Chun
    • Korean Journal of Materials Research
    • /
    • v.19 no.9
    • /
    • pp.481-487
    • /
    • 2009
  • The photocatalysts of Fe-ACF/$TiO_2$ compositeswere prepared by the sol-gel method and characterized by BET, XRD, SEM, and EDX. It showed that the BET surface area was related to adsorption capacity for each composite. The SEM results showed that ferric compound and titanium dioxide were distributed on the surfaces of ACF. The XRD results showed that Fe-ACF/$TiO_2$ composite only contained an anatase structure with a Fe mediated compound. EDX results showed the presence of C, O, and Ti with Fe peaks in Fe-ACF/$TiO_2$ composites. From the photocataytic degradation effect, $TiO_2$ on activated carbon fiber surface modified with Fe (Fe-ACF/$TiO_2$) could work in the photo-Fenton process. It was revealed that the photo-Fenton reaction gives considerable photocatalytic ability for the decomposition of methylene blue (MB) compared to non-treated ACF/$TiO_2$, and the photo-Fenton reaction was improved by the addition of $H_2O_2$. It was proved that the decomposition of MB under UV (365 nm) irradiation in the presence of $H_2O_2$ predominantly accelerated the oxidation of $Fe^{2+}$ to $Fe^{3+}$ and produced a high concentration of OH radicals.

Synthesis, Structures and Photoluminescent Properties of Two Novel Zinc(II) Compounds Constructed from 5-Sulfoisophthalic Acid

  • Zhu, Yu-Lan;Tang, Xue-Ling;Ma, Kui-Rong;Chen, Hao;Ma, Feng;Zhao, Lian-Hua
    • Bulletin of the Korean Chemical Society
    • /
    • v.31 no.7
    • /
    • pp.1881-1886
    • /
    • 2010
  • Hydrothermal reaction of zinc(II) salts with 5-sulfoisophthalic acid monosodium salt ($NaO_3SC_6H_3$-1,3-(COOH)$_2$, $NaH_2$-SIP) and 1,10-phenanthroline (phen) led to two new compounds, [Zn(phen)$_3$$\cdot2H_2SIP\cdot4H_2O$ (1) and [Zn(phen)$_2(H_2O)_2]\cdot2H_2SIP\cdot2H_2O$ (2). They were characterized by element analysis, IR spectroscopy, thermalgravimetric analysis (TGA), X-ray powder diffraction (XRD), and single-crystal X-ray diffraction. Both compounds 1-2 represent the first example of Zn/phen/SIP system. The Zn (II) ion in 1 is six-coordinated by six nitrogen atoms from three phen molecules, and the $H_2SIP^-$ ligands engage in the formation of hydrogen bond. The Zn(II) ion in 2 is coordinated by four nitrogen atoms from two phen molecules and two oxygen atoms from two water molecules. Moreover, both 1 and 2 are assembled into 3D supramolecular architectures by hydrogen bonds (O-H$\ldots$O) and $\pi-\pi$ interactions. Solvent water molecules occupying voids of the compounds serve as receptors or donors of the extensive O-H$\ldots$O hydrogen bonds.

Electrocatalytic activity of the bimetallic Pt-Ru catalysts doped TiO2-hollow sphere nanocomposites (Pt-Ru@TiO2-H 나노구조체촉매의 합성 및 전기화학적 특성평가)

  • Lee, In-Ho;Kwen, Hai-Doo;Choi, Seong-Ho
    • Analytical Science and Technology
    • /
    • v.26 no.1
    • /
    • pp.42-50
    • /
    • 2013
  • This paper describes the electrocatalytic activity for the oxidation of small biomolecules on the surface of Pt-Ru nanoparticles supported by $TiO_2$-hollow sphere prepared for use in sensor applications or fuel cells. The $TiO_2$-hollow sphere supports were first prepared by sol-gel reaction of titanium tetraisopropoxide with poly(styrene-co-vinylphenylboronic acid), PSB used as a template. Pt-Ru nanoparticles were then deposited by chemical reduction of the $Pt^{4+}$ and $Ru^{3+}$ ions onto $TiO_2$-hollow sphere ($Pt-Ru@TiO_2-H$). The prepared $Pt-Ru@TiO_2-H$ nanocomposites were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and elemental analysis. The electrocatalytic efficiency of Pt-Ru nanoparticles was evaluated via ethanol, methanol, dopamine, ascorbic acid, formalin, and glucose oxidation. The cyclic voltammograms (CV) obtained during the oxidation studies revealed that the $Pt-Ru@TiO_2-H$ nanocomposites showed high electrocatalytic activity for the oxidation of biomolecules. As a result, the prepared Pt-Ru catalysts doped onto $TiO_2$-H sphere nanocomposites supports can be used for non-enzymatic biosensor or fuel cell anode electrode.

Selective Oxidation of Hydrogen Sulfide Containing Ammonia and Water Using Fe2O3/SiO2 Catalyst (Fe2O3/SiO2 촉매 상에서 물과 암모니아가 함께 존재하는 황화수소의 선택적 산화 반응)

  • Kim, Moon-Il;Lee, Gu-Hwa;Chun, Sung-Woo;Park, Dae-Won
    • Korean Chemical Engineering Research
    • /
    • v.50 no.3
    • /
    • pp.398-402
    • /
    • 2012
  • The catalytic performance of some metal oxides in the vapor phase selective oxidation of $H_2S$ in the stream containing ammonia and water was investigated. Among the catalysts tested $Fe_2O_3/SiO_2$ was the most promising catalyst for practical application. It showed higher than 90% $H_2S$ conversion and very small amount of $SO_2$ emission over a temperature range of $240{\sim}280^{\circ}C$. The effects of reaction temperature, $O_2/H_2S$ ratio, amount of ammonia and water vapor on the catalytic activity of $Fe_2O_3/SiO_2$ were discussed to better understand the reaction mechanism. The $H_2S$ conversion showed a maximum at $260^{\circ}C$ and it decreased with increasing temperature over $280^{\circ}C$. With an increase of $O_2/H_2S$ ratio from 0.5 to 4, the conversion was slightly increased, but the selectivity to elemental sulfur was remarkably decreased. The increase of ammonia amount favored the conversion and the selectivity to elemental sulfur with a decrease in $SO_2$ production. The presence of water vapor decreased both the activity and the selectivity to sulfur, but increased the ATS selectivity.

The relations between second-stage temperatures and gases partial pressures at the stainless steel high vacuum chamber by cryogenic pumping (크라이오 펌프를 이용한 스테인레스 스틸 고진공용기 배기에서 2차 냉각판 온도와 용기 내부의 기체 부분압 관계)

  • Hong S. S.;Lim J. Y.;Shin Y. H.;Chung K. H.;Arakawa Ichiro
    • Journal of the Korean Vacuum Society
    • /
    • v.13 no.4
    • /
    • pp.139-144
    • /
    • 2004
  • Recently, the importance of clean vacuum and partial pressure measurement of gas species has been increased in the vaccum process. In this study, the partial pressures of $H_2$, He, C, N, $O_2$, $H_2O $, Ar/2, $N_2$(CO), Ar, $CO_2$ were measured by residual gas analyzer according to temperature of cryogenic pump which is used to clean vacuum generation and compared. The experimental results showed that the cryopanel temperature was reached to 12K after 72 minutes of pumping and after 25hours, the partial pressures in percent were 24.9 %, 6.6%, 5.5 %, 2.2 %, 3.8%, 30.7%, 6.5%, 6.1 %, 5.5%, 8.2% for $H_2$, He, C, N, $O_2$, $H_2O $, Ar/2, $N_2$, Ar, $CO_2$ respectively. The dominant gases were $H_2$ and $H_2O $, and the partial pressures were relatively high compare to other gases.

Characteristics of Phenol Degradation by using UV/TiO2 Photocatalysis (UV/TiO2 광촉매반응에 의한 페놀의 분해 특성)

  • Shin, In-Soo;Choi, Bong-long;Lee, Seung-Mok
    • Journal of Korean Society on Water Environment
    • /
    • v.20 no.5
    • /
    • pp.488-493
    • /
    • 2004
  • The effects were examined from several conditions of $TiO_2$ photocatalysis reaction to phenols degradation by changing it's reacting conditions such as phenol concentration, pH, $TiO_2$ concentration, $H_2O_2$ concentration, flow rate, and intensity of ultraviolet rays. Phenol degradation was more efficient in low concentration of phenol, neutral pH. Phenol degradation appeared to increase as concentration of $TiO_2$ photocatalyst, that of $H_2O_2$ and intensity of ultraviolet rays increased. As $TiO_2$ dosage increased, initial rate constant k linearly increased. When $H_2O_2$ was injected more than optimum, phenol removal rate didn't increase in proportional to the change of $H_2O_2$ concentration as OH radicals was being consumed. When flow rate is less than $4.75m^3/m^2$ day, phenol removal efficiency appeared to decrease as ultraviolet rays transmission rate becomes low by $TiO_2$ suspension coated in photo reaction column. Meanwhile, initial rate constant according to light intensity change in less than $25mW/cm^2$ appeared to be in proportion to light intensity ($mW/cm^2$) Removal efficiency decreased about 12% after 180 minutes of reaction time while showed stable removal efficiency of 100% after 300 minutes when using regenerated $TiO_2$.

Inhibition of Human Periodontal Stem Cell Death Following the Antioxidant Action of Celecoxib (Celecoxib의 항산화 작용에 따른 성체 치주인대 줄기세포 사멸억제)

  • Kyung-Hee Lee
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.11 no.2
    • /
    • pp.169-179
    • /
    • 2023
  • Purpose : Although human periodontal ligament stem cells (hPDLSCs) are a supportive factor for tissue engineering, oxidative stress during cell culture and transplantation has been shown to affect stem cell viability and mortality, leading to failed regeneration. The aim of this study was to evaluate the antioxidant and protective effects against cell damage of celecoxib, a selective cyclooxygenase-2 (COX-2) inhibitor, and the antioxidant signal of hPDLSCs in H2O2-induced oxidative stress. Methods : To induce oxidative stress in cultured hPDLSCs, H2O2 was used as an exogenous reactive oxygen species (ROS). Dose-dependent celecoxib (.1, 1, 10, or 100 µM) was administered after H2O2 treatment. WST-1 assay was used to assess cell damage and western blot was used to observe antioxidant activity of hPDLSCs in oxidative stress. Immunohistochemistry was performed for inverting the localization of the SOD and Nrf2 antibody. Results : We found that progressive cell death was induced in hPDLSCs by H2O2 treatment. However, low-dose celecoxib reduced H2O2-induced cellular damage and eventually enhanced the SOD activity and Nrf2 signal of hPDLSCs. Oxidative stress-induced morphological change in hPDLSCs included lowered the survival and number of spindle-shaped cells, and shrinkage and shortening of cell fibers. Notably, celecoxib promoted cell survival function and activated antioxidants such as SOD and Nrf2 by positively regulating the cell survival signal pathway, and also reduced the number of morphological changes in hPDLS. Immunohistochemistry results showed a greater number of SOD- and Nrf2-stained cells in the celecoxib-treated group following oxidative stress. Conclusion : By increasing SOD and Nrf2 expression at the antioxidant system, the findings suggest that celecoxib enhanced the antioxidative ability of hPDLSCs and protected cell viability against H2O2-induced oxidative stress by increasing SOD and Nrf2 expression in the antioxidant system.