• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.150-155
• /
• 1999

The ignition delay times behind reflected shock waves in $C_2H_6-O_2-Ar$ systems containing $CH_3Cl$ were measured for the range of temperatures between 1270 and 1544 K. The measurements indicated that $CH_3Cl$ inhibited the ignition of ethane ignition and the inhibition effects increased with increasing $CH_3Cl$ concentration. To clarify the inhibition effects of $CH_3Cl$ from the viewpoint of the reaction mechanism, computational analyses were performed in $C_2H_6-CH_3CI-O_2-Ar$ mixtures.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.2
• /
• pp.81-84
• /
• 2010

Al-doped ZnO (AZO) films were prepared by an Ar:$H_2$ gas radio frequency (RF) magnetron sputtering system with a AZO ($2\;wt{\cdot}%\;Al_2O_3$) ceramic target at the low temperature of $100^{\circ}C$ and annealed in hydrogen ambient at the temperature of $300^{\circ}C$. To investigate the influence of the $H_2$ flow ratio on the properties of the AZO films, the $H_2$ flow ratio was changed from 0.5% to 2%. As a result, the AZO films, deposited with a 1% $H_2$ addition, showed a resistivity of $11.7\;{\times}\;10^{-4}\;{\Omega}{\cdot}cm$. When the AZO films were annealed at $300^{\circ}C$ for 1 hour in a hydrogen atmosphere, the resistivity decreased from $11.7\;{\times}\;10^{-4}\;{\Omega}{\cdot}cm$ to $5.63\;{\times}\;10^{-4}\;{\Omega}{\cdot}cm$. The lowest resistivity of $5.63\;{\times}\;10^{-4}{\Omega}{\cdot}cm$ was obtained by adding 1% hydrogen gas to the deposition and annealing process. The X-ray diffraction patterns of all the films showed a preferable growth orientation in the (002) plane. The spectrophotometer measurements showed that the transmittance of 85% was obtained by the film deposited with the $H_2$ flow ratio of 1% at 940 nm for GaAs/GaAlAs LEDs.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.951-956
• /
• 2005

Selection of oxygen-tolerant strains and elucidation of their oxygen tolerance mechanism were crucial for effective use of bifidobacteria. Oxygen-tolerant bifidobacteria were able to significantly remove environmental oxygen (oxygen removal activity) as compared to oxygen-sensitive strains. Most oxygen removal activity was inhibited by heat treatment and exposure to extreme pH (2.0) of bifidobacterial cell. NADH oxidase was major enzyme related to oxygen removal activity. Oxygen-tolerant bifidobacteria possessed high NADH peroxidase activity level to detoxify $H_2O_2$ formed from reaction of NADH oxidase. Addition of oxygen to anaerobic culture broth significantly increased activities of HADH oxidase and NADH peroxidase within 1hr and rapid increment of oxygen concentration was prevented. Results showed NADH oxidase and NADH peroxidase of oxygen-tolerant bifidobacteria played important roles in elimination of oxygen and oxygen metabolite $(H_2O_2)$.

• Journal of the Korean Ceramic Society
• /
• v.56 no.3
• /
• pp.284-290
• /
• 2019

Ternary MoS₂/graphene (G)-TiO₂ photocatalysts were prepared by a simple hydrothermal method. The morphology, phase structure, band gap, and catalytic properties of the prepared samples were investigated by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, UV-vis spectrophotometry, and Brunauer-Emmett-Teller surface area measurement. The H₂ production efficiency of the prepared catalysts was tested in methanol-water mixture under visible light. MoS₂/G-TiO₂ exhibited the highest activity for photocatalytic H₂ production. For 5 wt.% and 1 wt.% MoS₂ and graphene (5MT-1G), the production rate of H₂ was as high as 1989 µmol^-1h^-1. The catalyst 5MT-1G showed H₂ production activity that was ~ 11.3, 5.6, and 4.1 times higher than those of pure TiO₂, 1GT, and 5MT, respectively. The unique structure and morphology of the MoS₂/G-TiO₂ photocatalyst contributed to its improved hydrogen production efficiency under visible light.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.7
• /
• pp.49-54
• /
• 2012

This study focuses on the decomposition of pentachlorophenol(PCP) by an electron beam (E-beam) process. To attain this objective, we investigated the reactive species generated from E-beam process during irradiation (reaction time 0.6 s) and G-values of PCP decomposition and effects of pH and $H_2O_2$ as an additive. The effect of pH values was independent on the decomposition of PCP. However, during E-beam irradiation a scavenging effect of added $H_2O_2$ (> 1mM) for the decomposition of PCP was shown, which was supported by the decreased amounts of $Cl^-$ produced by the decomposition of PCP. Meanwhile, oxalic acid and unidentified organic chlorine compounds as by-products were increased by the addition of $H_2O_2$. Thus, in order to enhance the efficiency of PCP decomposition, the E-beam process has to consider a proper concentration of $H_2O_2$ as a well-known source of strong oxidant hydroxyl radical.

• Mass Spectrometry Letters
• /
• v.5 no.4
• /
• pp.120-123
• /
• 2014

The interference of water vapor on the chemical ionization (CI) of hydroxyl radicals (OH) by sulfur hexafluoride ion ($SF_6{^-}$) was investigated using a flow tube system coupled to a high-pressure CI mass spectrometer. Water vapor, which is required to study heterogeneous reactions of OH under real tropospheric conditions, transforms the reagent ion $SF_6{^-}$ into $SF_4O^-$ and $F^-(HF)_n$, resulting in a substantial loss in CI sensitivity. Therefore, under humid conditions, peaks corresponding to OH are drastically diminished, while those corresponding to OH-water complex ions ($[OH(H_2O)_n]^-$) are enhanced. $[OH(H_2O)_3]^-$ was observed as the major OH species. The obsercation of $[OH(H_2O)_n]^-$ by isolating humid conditions to the CI region and preliminary ab initio calculations suggested that $[OH(H_2O)_n]^-$ ions were produced from reactions between OH ions ($OH^-$) and water molecules. An additional helium buffer flow introduced into the CI region reduced loss of the reagent ion and resulted in a partial recovery of OH peak intensities under humid conditions.

• Korean Journal of Materials Research
• /
• v.25 no.5
• /
• pp.238-246
• /
• 2015

$H_2S$ is a flammable toxic gas that can be produced in plants, mines, and industries and is especially fatal to human body. In this study, CuO nanowire structure with high porosity was fabricated by deposition of copper on highly porous singlewall carbon nanotube (SWCNT) template followed by oxidation. The SWCNT template was formed on alumina substrates by the arc-discharge method. The oxidation temperatures for Cu nanowires were varied from 400 to $800^{\circ}C$. The morphology and sensing properties of the CuO nanowire sensor were characterized by FESEM, Raman spectroscopy, XPS, XRD, and currentvoltage examination. The $H_2S$ gas sensing properties were carried out at different operating temperatures using dry air as the carrier gas. The CuO nanowire structure oxidized at $800^{\circ}C$ showed the highest response at the lowest operating temperature of $150^{\circ}C$. The optimum operating temperature was shifted to higher temperature to $300^{\circ}C$ as the oxidation temperature was lowered. The results were discussed based on the mechanisms of the reaction with ionosorbed oxygen and the CuS formation reaction on the surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.491-491
• /
• 2013

A novel plasma system has been developed for 3-dimensional modification of the carbon nano-powders. Improvement of dispersion of these nano materials are studied by plasma discharge, not using chemical modification. The plasma process is considered to great advantages over wet chemical process due to environmental, economic viewpoint, and uniformity over the treated volume. The uniform dispersion is a critical factor for these material's nano composite applications. Using this plasma system, graphene, carbon black, and CNT was treated and functionalized. Several key discharge conditions such as Ar/H2/O2 or Ar/H2/NH3 gas ratio, treatment time, power, feeder's vibration frequency are investigated. Hydrophobic of graphene has turned some more into hydrophilic by reaction test with water, electrophoresis, surface contact angle test, and turbidity analysis. The oxygen content ratio in the plasma treated CNT has increased about 3.7 times than the untreatedone. In the case of graphene and carbon black, the oxygen- and nitrogen- content has been enhanced average 10%. O-H (N-H) peak, C-O (C-N) peak, and C=O (C=N) peak data have been detected by FTIR measurement and intensified compared to before-plasma treatment due to O2 or NH3 content.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.4
• /
• pp.209-215
• /
• 1988

The three-dimensional structures of piroxicam crystallized from two different solvents, toluene and toluene/hexane mixture respectively, are proved identical: $C_{15}H_{13}N_3O_4S,\;M\;=\;331.35$, monoclinic, a = 7.128(1), b = 15.146(2), c = 13.956(2) ${\AA},\;{\beta}=\;97.33(1)^{\circ},\;V\;=\;1494.37{\AA}^{3},\;Dx\;=\;1.472\;g/cm^{3},\;Z\;=\;4,\;space\;group\;P2_{1}/c,\;Mo\;K{\alpha}(\lambda=\;0.71073\;{\AA})$, F(000) = 688, T = 295 K, R = 0.0611 for 1993 unique observed reflections. The thiazine ring exhibits a half chair conformation. An amide group is involved in an intramolecular hydrogen bond to the hydroxy group, O(17)-H(17)${\cdots}O(15){\AA}$. The molecule is planar within 2 ${\AA}$ with the interplanar angle $127.9(4)^{\circ}$ between pyridine and benzene rings. A molecular chain parallel to [011] is formed by two intermolecular hydrogen bonds N(16)-H(6)${\cdots}O(11)$ and C(6)-H(6)${\cdots}O(11)$, and the molecular chains are held together by van der Waals forces.

• Journal of Sensor Science and Technology
• /
• v.16 no.1
• /
• pp.11-16
• /
• 2007

CuO is an important transition metal oxide with many practical applications such as catalysts, p-type semiconductor, solar cells, magnetic storage media and cathode materials. In this contribution, nanocrystalline CuO powders were prepared by solution reduction method using copper chloride ($CuCl_{2}{\cdot}2H_{2}O$), hydrazine ($N_{2}H_{4}$) and NaOH and subsequent heat treatment. The gas sensor using nanocrystalline CuO powders showed high sensitivities to acetone and ethanol.