• The Korean Journal of Mycology
• /
• v.23 no.3 s.74
• /
• pp.275-283
• /
• 1995

The nutritional requirements of mycelial growth for Pleurotus spp. were studied. As the carbon sources, soluble starch and dextrin, nitrogen sources, arginine and ammonium tartrate, and calcium sources, $CaCO_3$ enhanced mycelial growth. Optimum C/N ratio was 100 : 1. On the base of results from the experiment on nutritional requirements, the following receipe is suggested for growth of Pleurotus spp.; starch 15 g, arginine 3.484 g, ammonium tartrate 3.06 g, $CaCO_3$ 0.314 g, $KH_2PO_4$ 8.138 g, $K_2HPO_4$ 1.584 g, $MgSO_4{\cdot}7H_2O$ 1.5 g for P. sajor-caju and 2.5 g for P. ostreatus. $FeSO_4{\cdot}7H_2O$ 0.02 g, $ZnSO_4{\cdot}7H_2O$ 0.03 g, $MnSO_4{\cdot}7H_2O$ 0.02 g, optimum pH 6.0. This new synthetic medium is tentatively designated as Park's medium.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.691-694
• /
• 2009

TBAB (Tetra-n-butyl ammonium bromide)는 상압에서 semi-clathrate를 형성하는 물질로서 최근 열역학적 촉진제 및 기체 저장 물질로서 주목받고 있다. 본 연구에서는 가스 하이드레이트 형성 시TBAB가 열역학적 촉진제로서 미치는 영향을 알아보기 위해 다양한 농도 (5, 10, 40, 60 wt%)의 TBAB를 $CH_4\;+\;H_2O$계, $CO_2\;+\;H_2O$계, $N_2\;+\;H_2O$계에 첨가하여 가스 하이드레이트 3상 평형 (H - LW - V)을 측정 하였다. 실험 결과 TBAB의 조성에 따른 촉진경향은 각 계가 유사하지만, 촉진 정도는 $N_2\;+\;H_2O$ 계가 앞의 두계에 비해 월등히 큰 것을 알 수 있었다. 또한, TBAB 농도가 40 wt% 일때 촉진효과가 가장 크게 나타났으며, 그 이상의 농도에서는 반대로 촉진효과가 감소하는 것을 알 수 있었다. 이는 혼합 하이드레이트 형성에 참여하지 못한 TBAB가 가스 하이드레이트 형성을 억제하기 때문으로 사료된다. 결과적으로 가스하이드레이트 공정에 TBAB를 열역학적 촉진제로서 적용할 경우 촉진효과가 가장 큰 40 wt% 범위의 농도로 사용하는 것이 가장 적절할 것으로 사료된다. 본 실험에서 얻어진 결과는 가스 하이드레이트 형성을 이용한 천연가스 수송/저장법을 위한 연구뿐만 아니라 기체 분리 공정 개발과 관련된 연구의 중요한 기초 자료가 될 것이다.

• Journal of Surface Science and Engineering
• /
• v.28 no.1
• /
• pp.55-63
• /
• 1995

Alkaline solutions such as $NH_4$OH, choline and TMAH (($CH_3$)$_4$NOH) have been introduced in semiconductor wet processing of silicon wafers to control ionic and particulate impurities following etching in acidic solutions. These chemicals usually mixed with hydrogen peroxide and/or surfactants to control the etch rate of silicon. The highest etch rate was observed in $NH_4$OH solutions at a pH in alkaline solutions. It indicates that the etch rate depends on the content of $OH^{-}$ as well as cations of alkaline solutions. STM/AFM techniques were used to characterize the effect of alkaline solutions on silicon surface roughness. In SC1 (mixture of $NH_4$OH : $H_2$$O_2$ : $H_2$O) solutions, the reduction of the ammonium hydroxide proportion from 1 to 0.1 decreased the surface roughness ($R_{rms}$) from 6.4 to $0.8\AA$. The addition of $H_2$$O_2$ and surfactants to choline and TMAH reduced the values of $R_{p-v}$ and $R_{rms}$ significantly. $H_2$$_O2$ and surfactants added in alkaline solutions passivate bare silicon surfaces by the oxidation and adsorption, respectively. The passivation of surfaces in alkaline solutions resulted in lower etch rate of silicon thereby provided smoother surfaces.s.ces.s.

• Journal of Powder Materials
• /
• v.11 no.2
• /
• pp.118-123
• /
• 2004

A formation of aluminum hydroxide by hydrolysis reaction in the water has been studied by using nano aluminum powder fabricated by pulsed wire evaporation(PWE) method. The hydroxide type and morphology depending on temperature and pH were examined by structural analysis. The Boehmite($Al_2O_3$.$H_2O$ or AIO(OH)) was predominantly formed in high temperature region over 4$0^{\circ}C$, while the Bayerite($Al_2O_3$.$H_2O$ or $Al(OH)_3$) below $30^{\circ}C$ of hydrolysis temperature. The Boehmite formation was preferred to the Bayerite in acidic solution in the same hydrolysis temperature. The slowly formed Bayerite phase showed facet crystalline structure, while the fast formed Boehmite was fine fiber with a large aspect ratio of several nm in diameter and several hundred nm in length, and with much larger specific surface area(SSA) than that of Bayerite. The highest SSA was about $420m^2$/g.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.29-36
• /
• 2022

The hydrogen reduction behavior of molybdenum oxides was studied using a horizontal-tube reactor. Reduction was carried out in two stages: MoO₃ → MoO₂ and MoO₂ → Mo. In the first stage, a mixed gas composed of 30 vol% H₂ and 70 vol% Ar was selected for the MoO₃ reduction because of its highly exothermic reaction. The temperature ranged from 550 to 600 ℃, and the residence time ranged from 30 to 150 min. In the second step, pure H₂ gas was used for the MoO₂ reduction, and the temperature and residence time ranges were 700-750 ℃ and 30-150 min, respectively. The hydrogen reduction behavior of molybdenum oxides was found to be somewhat different between the two stages. For the first stage, a temperature dependence of the reaction rate was observed, and the best curve fittings were obtained with a surface reaction control mechanism, despite the presence of intermediate oxides under the conditions of this study. Based on this mechanism, the activation energy and pre-exponential were calculated as 85.0 kJ/mol and 9.18 × 10⁷, respectively. In addition, the pore size within a particle increases with the temperature and residence time. In the second stage, a temperature dependence of the reaction rate was also observed; however, the surface reaction control mechanism fit only the early part, which can be ascribed to the degradation of the oxide crystals by a volume change as the MoO₂ → Mo phase transformation proceeded in the later part.

• Korean Journal of Food Science and Technology
• /
• v.6 no.1
• /
• pp.6-11
• /
• 1974

Four new compounds; 2,2'-methylene-bis [3, 4, 6-trichloro ${{\beta}-(o-nitroanilino)$ propionoxy} benzene]; m.p. $200{\sim}202^{\circ}C,\;C_{31}H_{22}O_8N_4Cl_6$ 2,2'-methylene-bis [3, 4, 6-trichloro ${{\beta}-(p-nitroanilino)$ propionoxy} benzene]; m.p. $168-170^{\circ}C,\;C_{31}H_{22}O_8N_4Cl_6$ : 2,2'-Methylene-bis [3, 4, 6-trichloro ${{\beta}-(o-chloro-p-nitroanilino)$ propionoxy} benzene]; m.p. $170.5-172.5^{\circ}C,\;C_{31}H_{20}O_8N_4Cl_8$ : 2,2'-Methylene-bis [3, 4, 6-trichloro ${{\beta}-(c-methyl-p-nitroanilino)$ propionoxy} benzene]; m.p. $163-164^{\circ}C,\;C_{33}H_{26}O_8N_4Cl_6$-were synthesized by Mannich reaction from 2,2'-Methylene-bis (3, 4, 6-trichloroacetoxy benzene) and their antimicrobial activities against the microorganisms Staphylococcus aureus, Escherichia coli, Bacillus subtilis Natto, Brevibacterium ammoniagenes, Candida tropicalis, Rhodotorula glutinis, Pseudomonas ovalis, Aspergillus candidus Link, Aspergillus awamori Nakazawa. Aspergillus niger var. Tieghem, Aspergillus usami Sakakuchi, Penicillium notatum-were tested. 2,2'-methylene-bis [3, 4, 6-trichloro ${{\beta}-(o-nitroanilino)$ propionoxy} benzene] showed a strong antimicrobial activity against Bacilus subtilis Natto and Brevibacterium ammoniagenes.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.1
• /
• pp.31-42
• /
• 2005

Background : Peroxiredoxins (Prxs) are a relatively newly recognized, novel family of peroxidases that reduce $H_2O_2$ and alkylhydroperoxide into water and alcohol, respectively. There are 6 known isoforms of Prxs present in human cells. Normally, Prxs exist in a head-to-tail homodimeric state in a reduced form. However, in the presence of excess $H_2O_2$, it can be oxidized on its catalytically active cysteine site into inactive oxidized forms. This study surveyed the types of the Prx isoforms present in the pulmonary epithelial, macrophage, endothelial, and other cell lines and observed their response to oxidative stress. Methods : This study examined the effect of exogenous, excess $H_2O_2$ on the Prxs of established cell lines originating from the pulmonary epithelium, macrophages, and other cell lines, which are known to be exposed to high oxygen partial pressures or are believed to be subject to frequent oxidative stress, using non-reducing SDS polyacrylamide electrophoresis (PAGE) and 2 dimensional electrophoresis. Result : The addition of excess $H_2O_2$ to the culture media of the various cell-lines caused the immediate inactivation of Prxs, as evidenced by their inability to form dimers by a disulfide cross linkage. This was detected as a subsequent shift to its monomeric forms on the non-reducing SDS PAGE. These findings were further confirmed by 2 dimensional electrophoresis and immunoblot analysis by a shift toward a more acidic isoelectric point (pI). However, the subsequent reappearance of the dimeric Prxs with a comparable, corresponding decrease in the monomeric bands was noted on the non-reducing SDS PAGE as early as 30 minutes after the $H_2O_2$ treatment suggesting regeneration after oxidation. The regenerated dimers can again be converted to the inactivated form by a repeated $H_2O_2$ treatment, indicating that the protein is still catalytically active. The recovery of Prxs to the original dimeric state was not inhibited by a pre-treatment with cycloheximide, nor by a pretreatment with inhibitors of protein synthesis, which suggests that the reappearance of dimers occurs via a regeneration process rather than via the de novo synthesis of the active protein. Conclusion : The cells, in general, appeared to be equipped with an established system for regenerating inactivated Prxs, and this system may function as a molecular "on-off switch" in various oxidative signal transduction processes. The same mechanisms might applicable other proteins associated with signal transduction where the active catalytic site cysteines exist.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.79-89
• /
• 1998

This study was carried out the effect of stability and color extract for it's condition in the curcuma L.. dyeing. The stability is to investigate the absorbance of the curcumin, one of the major yellow pigments and the stability regarding the effect of light, oxygen temperature and pH. The dyeing condition is compared the effect of mordanting condition and the best way to extract pigment and analysed through the color-fastness rating, color-difference value test. The main results obtained are summarized as follows ; 1.The best and proper solvent to extrect curcumin pigment was a ethanol and a distilled water. 2. The light effect indicated that the absorbances of solution in absence of ligh was more stable. 3. The oxygen(O2) effect to curcumin show-ed that the condition in the absence of O2 was more stable than that in presence of O2 4. The temperature showed that the absorbnace was best stable in4$^{\circ}C$ and less changed at $25^{\circ}C$ 5. The curcumin-etanol solution was stable in pH 2~4. 6. Generally color-fastness rating to silk, wool and cotton indicated that crocking C.F. and perspiration C.F. were more than 3rd grade and dry cleaning C.F. was more than 4th grade. But light color-fastness and washing color-fastness were very poor. 7. To make good color fastness, the mordan-ting treated group and the pre-mordant conditions were more effective than others 8. When compared with color-difference value test indicated that the silk was looks like more reddish and bluish color and than the wool and cotton were greenish and bluish. As a mordant, A(C2H4OH(COOH3) and D(K2Cr2O7)were more effective to make green-ish color in the silk and the reddish color was abtained by B(Al.K(SO4)2.12H2O) and C(FeSO4.7H2O).

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.5
• /
• pp.273-277
• /
• 2013

A unified potentiostat circuit for both $O_2$- and $H_2O_2$- based electrochemical glucose sensors was proposed and its function was verified by circuit simulations and measurement results of a fabricated chip. This circuit consisted of an operational amplifier, a comparator and current mirrors. The proposed circuit was fabricated with a $0.13{\mu}m$ thick oxide CMOS process and an active area of $360{\mu}m{\times}100{\mu}m$. The measurements revealed an input operation range from 0.5 V to 1.6 V in the $H_2O_2$- based bio-sensor and from 1.7 V to 2.6 V in the $O_2$- based bio-sensor with a supply voltage of 3.3 V. The evaluation results showed that the proposed potentiostat circuit is suitable for measuring the electrochemical cell currents of both $O_2$- and $H_2O_2$- based glucose sensors.

• Journal of Sensor Science and Technology
• /
• v.22 no.4
• /
• pp.302-307
• /
• 2013

The Sb-doped $SnO_2$ nanowire network sensors were prepared by thermal evaporation of the mixtures between tin and antimony powders. Pure $SnO_2$ nanowire networks showed high sensor resistance in air ($99M{\Omega}$), similar gas responses to 4 diffferent gases (5 ppm $C_2H_5OH$, CO, $H_2$, and trimethylamine), and very sluggish recovery speed (90% recovery time > 800 s). In contrast, 2 wt% Sb-doped $SnO_2$ showed the selective detection toward $C_2H_5OH$ and trimethylamine, relatively low resistance ($176k{\Omega}$) for facile measurement, and ultrafast recovery speed (90% recovery times: 6 - 18 s). The change of gas sensing charactersitics by Sb doping was discussed in relation to gas sensing mechanism.