• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.150-150
• /
• 2009

We prepared the Au-coated $TiO_2$ (Au/$TiO_2$) nanoparticles by deposition-precipitation (DP) method with and without bases (urea or NaOH) and investigated the effects of pH on the preparation of Au/$TiO_2$ nanoparticles for various kinds of bases. For the DP method without bases, the Au nanoparticles in the diameter of about 50 nm were generated in the solution by the reduction reaction with trisodium citrate and they did not deposit on the surface of $TiO_2$. For the DP method with bases, Au precursors deposited on the surface of $TiO_2$ and then reduced to the Au nanoparticles in the diameter of 4-5 nm on the surface of $TiO_2$ by the reaction with trisodium citrate.

• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.577-582
• /
• 2004

The photocatalytic degradation of atrazine and PCP, a endocrine disruptors, has been investigated over $TiO_2$ photocatalysts under ultraviolet (UV) light irradiation. The effect of operational parameters, i.e., pH, light intensity and persulphate concentration on the degradation rate of aqueous solution of atrazine and PCP has been examined. The results presented in this work demonstrate that, as pH and the light intensity increased, the photocatalytic reaction rates were enhanced. Individual use of $TiO_2$-persulphate was far more effective than using only $TiO_2$ in atrazine and PCP removal. Based on the overall experimental results, the photocatalytic oxidation of atrazine and PCP with the coated $TiO_2$ photocatalyst is found to be very effective under the operational conditions delineated in this study.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.223-229
• /
• 2007

The mechanism of hydrothermally synthesizing Na-A zeolite from siliceous mudstone at a $Na_2O/SiO_2$ ratio of 0.6, a $SiO_2/Al_2O_3$ 2.0 and a $H_2O/Na_2O$ 119 has been observed by IR, DTA, XRD and SEM. This mudstone is a tertiary periodic sedimentary rock and widely spreads around the Pohang area. In the early hydrothermal synthesis at $80^{\circ}C$ in an autoclave, sodium silicate and sodium aluminate were found to be preferentially reacted to generate Na-A type zeolite. Gibbsite and bayerite were also formed due to the presence of extra aluminum oxide in the feedstock. As reaction time in-creased up to 50 h, residual sodium aluminatewas reacted with siliceous mudstone, causing the Na-A zeolite crystal to grow and the hydroxylsodalite to generate. Therefore, in the $14{\sim}50\;h$ synthetic time, Na-A zeolite and hydroxylsodalite were formed. Also, if reaction time passed over 50 h, a part of the Na-A zeolite was finally redissolved and reacted with hydroxylsodalite to synthesize Na-P zeolite, generating porous surface of Na-A zeolite and disappearing hydroxylsodalite.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.233-240
• /
• 2000

In order to fabricate dense cordierite ceramics without sintering aid, thermal behavior of Mg-Al-Si compounds during sintering was investigated. The dispersibility of cordierite suspension in aqueous media was measured by ESA(electrokinetic sonic amplitude). To prevent aggregation and insufficient dispersion of the cordierite sol, the pH of the suspension was controlled to 1.03 and 8.30 by adding $2N\;HNO_3$ and $2N\;NH_4OH$, respectively. Magnesium-aluminum-silicate complex gel coexisted in the specimen which has been gelled at $150^{\circ}C$ fir 12 hours, however several metastable phase such as ${\mu}-cordierite(Mg_2Al_4Si_5O_{18}),\;spine(MgAl_2O_4)\;and\;mullite(Al_6Si_2O_{13})$ existed below $1300^{\circ}C$ Nucleation rates of the two suspension were similar, but densification of the gel was sensitive to the pH of the sol. Densification of the sol with the pH of 8.3 was more pronounced than that of the sol with pH of 1.63.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.802-805
• /
• 2003

The ion-induced secondary electron emission coefficient ${\gamma}$ for MgO thin film with $O_{2}$ plasma treatment has been investigated by ${\gamma}$-FIB (focused ion beam) system. The MgO thin film deposited from sintered material with $O_2$ plasma treatment is found to have higher ${\gamma}$ than that without $O_{2}$ plasma treatment. The energy of $Ne^{+}$ ions used has been ranged from 100eV to 200eV throughout this experiment. It is found that the highest secondary electron emission coefficient ${\gamma}$ has been achieved for 10 minutes of $O_{2}$ plasma treatment.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.981-986
• /
• 2000

Er(NO$_3$)$_3$.5$H_2O$, Mn($CH_3$$CO_2$)$_2$.4$H_2O$를 출발원료로 사용하여 졸-겔법으로 제조한 ErMnO$_3$박막의 열처리 온도 및 기판 배향성에 따른 박막 배향성과 누설 전류 특성에 관하여 연구하였다. ErMnO$_3$박막은 75$0^{\circ}C$ 이하의 온도에서 1시간 열처리 시비정질상태였으나, 78$0^{\circ}C$ 이상의 온도에서 hexagonal pahse인 ErMnO$_3$로 결정화되었다. 열처리 온도가 증가할수록 기판 배향성과 무관하게 모든 방향으로 결정이 성장함을 알 수 있었다. 결정화 정도와 결정 성장 축에 따라 누설 전류 값이 변화함을 알 수 있었고, 80$0^{\circ}C$에서 열처리한 시편에서는 누설 전류 변화가 비선형적인 경향으로 증가하였으며, $10^{-5}$ A/$ extrm{cm}^2$ 이하로 유지되었다.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.2
• /
• pp.365-372
• /
• 2002

The mineral medicines mean a sort of mineral or rock for medical treatment and natural material using their chemical components and physical properties. In this study, it was apprehended the mineralogical characteristics of As-bearing group mineral medicines. The extraction test is an vitro test system for predicting the bioavailability of the major and minor elements from mineral medicines and incorporates gastrointestinal tract parameters representative of a human(including stomach and small intestinal pH, stomach mixing time and velocity). The results of the extraction test are used for reaction path modeling in human body. Reaction path modeling in human body can predict digestion with gastric juice as well as bioavailability, speciation. Also, it can predict accumulation of arsenic as pH condition. As the results of the extraction test for digestion, the amounts of Fe extraction was the highest, followed by As, Ca, Ni. In addition, as the results of the reaction path modeling between arsenic compounds and gastric juice using thermodynamic data, when absorbed, major species are followed by H₃As₃S/sub 6/(aq), As₃S/sub 6/ (aq), AsO/sup +/, H₂As₃S/sup 6-/, H₂AsO/sup 3-/, HAs₃S6/sup 2-/, HAsO/sub 3//sup 2-/ and AsO/sub 3//sup 3-/. Specifically the concentration of H₃As₃S/sub 6/(aq) is the highest. As pH increases, the concentration of H₂AsO/sup 3-/, HAsO/sub 3//sup 2-/, HAsO/sub 3//sup 3-/, HAs₃S/sub 6//sup 2-/, H₂As₃S/sup 6-/, and H₃As₃S/sub 6/ increases, whereas the concentration of H₃As₃S/sub 6/ and AsO/sup +/ decreases. On the results of this study, it is able to find out effective and toxic components of poisonous arsenic group of mineral medicines and expected to be widely used for the development of new medicines.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1478-1480
• /
• 2001

ZnO : Al transparent conductive thin films were prepared by facing targets sputtering system with a DC power supply which can deposit a high quality thin films and control deposition condition in all range of $O_2$ gas ratio using ZnO target containing 8 at% of Al. Sputtering was carried out at a substrate temperature of R T with a DC current of 0.6 A and $O_2$ flow rate of 0 $\sim$ 0.9. The characteristics of ZnO : Al thin films was investigated by $\alpha$-step, four point probe, X-ray diffraction and UV/VIS spectrometer.

• Electrical & Electronic Materials
• /
• v.8 no.3
• /
• pp.352-356
• /
• 1995

Native oxide layer on MCT (HgCdTe) has been grown uniformly in H$\_$2/O$\_$2/ electrolyte through anodic oxidation method. It has been determined that anodic oxidation of HgCdTe in H$\_$2/O$\_$2/ electrolyte proceeds immediately with the input of constant currents without any induction time required for anodic oxideation in KOH electrolyte. Oxide layer with the resistivity of 2*10$\^$10/.ohm.cm and the refractive index of 2.1 suggested the possibility of well matching combination layer with ZnS for MCT MIS device. XPS results indicated that the major components of oxide layer grown in H202 solution is TeO$\_$2/ with the possibility of small amounts of CdTeO$\_$3/.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.3
• /
• pp.239-244
• /
• 1997

To develope more effective extraction methods for paraquat in soil, some modification methods were accomplished in two different types of soil. For extraction of tightly bound-paraquat, conc. HCl 70ml were added with different shaking times, and then $H_2SO_4$ reflux were performed for an hour. In this case, 60 minutes shaking were optimum and recovery were increased more $1.09{\sim}1.50$ folds(84.0% in high clay contents soil, but 96.7% in low clay contents soil) and the long-time consuming step, filtration were easily done, with decreasing filtration time were shorter 4.6 folds(ca. $11{\sim}14min.$). than general paraquat analytical method(ca. $55{\sim}65min.$). And only $H_2O_2$ digestion with different volume and refluxing time resulted in recovery increasing. Nevertheless, considering analyst's safety, 30ml of $H_2O_2$ addition and 30 minutes reflux were regarded as optimum condition. Although, Kjeldahl digestion with $H_2O_2$ showed relatively high recovery, it is not significant statistically. For extraction of loosely bound-paraquat, 0.01, 0.1, 1.0, 10.0M of $NH_4Cl$ and of $CaCl_2$ compared with $1.5{\sim}24hr$ of different shaking time. There were no loosely bound residues of paraquat.