• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.1
• /
• pp.36-41
• /
• 2002

Abstract The stoichiometric and double-ordered perovskite $Sr_2FeMoO_6$ (SFMO) polycrystalline ceramics were fabricated by sintering at above $900^{\circ}C$ in $H_2$(5%)/Ar reductive ambient. SMO polycrystals showed good ferromagnetic properties andmagnetrotesistqnce ratios of about 15 % at 8K and 3 % at room temperature. Amorphous SFMO thin films were deposited on $LaA1O_3$ and $SrTiO_3$ single crystal substrates using rf sputtering method with the SFMO polycrystalline ceramic target. Double-ordered perovskite polycrystalline SFMO thin films were fabricated by solid state crystallization by annealing the deposited amorphous films at above $680^{\circ}C$ in $H_2$(5%)/Ar reductive ambient. SFMO thin films exhibited ferromagnetic behavior. Their magnetroresistance ratios, however, were only 0.3~0.5% at 8K and disappeared with increasing the measuring temperature. This was attributed to the absence of magnetic spin tunneling between grains due to the porous structure and non-stoichiometric composition of the deposited films.

• Journal of Hydrogen and New Energy
• /
• v.21 no.5
• /
• pp.390-397
• /
• 2010

0.5wt% Ru/$\alpha-Al_2O_3$ catalysts are prepared by deposition-precipitation method for the preferential CO oxidation In order to investigate the effect of pH on the Ru dispersion and particle size, the pH of precursor solution is adjusted to between 5.5 and 9.5. 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared at the pH of 6.5 has high Ru dispersion of 17.9% and small particle size of 7.7nm. In addition, 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared at the pH 6.5 is easily reduced at low temperatures below $150^{\circ}C$ due to high dispersion of $RuO_2$ particle and shows high CO conversion over 90% in the wide temperature range between $100^{\circ}C$ and $160^{\circ}C$. Moreover, the deposition-precipitation is a feasible method to improve the Ru dispersion as compared to the impregnation method. The 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared by deposition-precipitation exhibits higher CO conversion than 0.5wt% Ru/$\alpha-Al_2O_3$ catalysts prepared by impregnation due to higher metal dispersion and better reducibility at low temperature.

• Korean Journal of Materials Research
• /
• v.30 no.7
• /
• pp.376-382
• /
• 2020

CeO₂ nanoparticles, employed in a lot of fields due to their excellent oxidation and reduction properties, are synthesized through a solvothermal process, and a high specific surface area is shown by controlling, among various process parameters in the solvothermal process, the type of solvent. The synthesized CeO₂ nanoparticles are about 11~13 nm in the crystallite size and their specific surface area is about 65.38~84.65 ㎡/g, depending on the amount of ethanol contained in the solvent for the solvothermal process; all synthesized CeO₂ nanoparticles shows a fluorite structure. The dispersibility and microstructure of the synthesized CeO₂ nanoparticles are investigated according to the species of dispersant and the pH value of the solution; an improvement in dispersibility is shown with the addition of dispersants and control of the pH. Various dispersing properties appear according to the dispersant species and pH in the solution with the synthesized CeO₂ nanoparticles, indicating that improved dispersing properties in the synthesized CeO₂ nanoparticles can be secured by applying dispersant and pH control simultaneously.

• Food Science of Animal Resources
• /
• v.18 no.1
• /
• pp.63-74
• /
• 1998

Recently the high outbreaks of intestinal disease caused by the consumption of frozen dairy foods containing pathogenic bacteria has generated considerable interest in the causative agent such as Listeria monocytogenes and E. coli O157:H7. This study was carried out to detect the above pathogens and compare the microbiological qualities of three commercial forzen yogurt products. The main results obtained were as follows. L. monocytogenes coliforms and E. coli O157:H7 were not detected in the total of seven frozen yogurt samples. For microbiological qualities the viable lactic counts of products manufactured by FA company were about 2.9$\times$108 -1.6$\times$109cfu/ml 1.7$\times$106 cfu/ml for FB's and 1.2$\times$106 cfu/ml for FC's The PH values of FA's FB's and FC's products was in the range of pH 4.1~5.3 and the values of FA's were 4.1~4.6 compared by the pH 5.2~5.3 of FB's and FC's products. During refrigeration of the test samples the survival rates of L. monocytogenes spiked into thawed frozen yogurt sample(FA's FB,s and FC's) were 0.55% 15.61% and 16.89% respectively. On the other hand E. coli O157:H7 and L. monocytogenes were 12.4% and 25.0% for FA's 10.8% and 20.8% for FB's and 10.26% and 22.7% for FC's under 37$^{\circ}C$ storage, As the results described above each frozen yogurt products were different in microbiological qualities. The survival rates of pathogens spiked into the samples increased with the pH of the products. This indicates that the pH or any other factors pre-sumable supressed the growth of E. coli O157:H7 and L. monocytogenes in frozen yogurt products.

• Journal of Hydrogen and New Energy
• /
• v.4 no.2
• /
• pp.5-15
• /
• 1993

Hydrogen production in visible light with the following semiconductor systems, $CdS-WO_3$, $CdS-TiO_2$, have been investigated in the presence of redox catalyst (Pt, $RuO_2$). MeOH, EtOH, isopropanol, sulfide/sulfite mixture, lactic acid were used as sacrifical reagents. The optimal condition for $H_2$ evolution was found to be in qgueous lactic acid media for $CdS-WO_3/RuO_2$. The photochemical efficiency for this system was 1.05 % and the $H_2$ evolution rate was 26.5ml/min. at $6.07{\times}10^{-5}$ einstein/sec photon rate

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.533-538
• /
• 1996

40$0^{\circ}C$ $H_2O$, D$_2$O 및 $O_2$ 분위기에서 Zr-2.5wt% Nb 합금의 부식거동을 비교.분석하였다. Zr-2.5wt% Nb 합금은 열처리에 따른 조직에 따라 각각의 부식매질에 대해 부식거동이 큰 차이를 보이고 있으나, 형성된 oxide는 열처리 및 부식매질에 관계없이 monoclinic ZrO$_2$ 만이 관찰되었다. 급냉조직인 martensitic $\alpha$'-Zr 상과 소둔처리 조직의 준안정상인 $\beta$-Zr 상의 경우. 부식분위기에 매우 민감하여, D$_2$O, H $_2$O, $O_2$ 순으로 큰 부식속도를 보였다. 반면, 안전성들인 $\alpha$-Zr과 $\beta$-Nb 상의 경우, 부식 분위기에 따른 별다른 부식거동 차이를 보이지 않았다. 이들 실험 결과를 바탕으로 월성형 원자로 압력관의 부식특성을 분석하였다.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.240-243
• /
• 1988

Degradation of the 90 K superconductor $YBa_2Cu_3O_{7-{\delta}}$ in water and humid atmosphere were studied and its decomposition products were identified as $BaCO_3$, CuO, $Y_2(CO_3)_3{\cdot}3H_2O$ and $O_2$. XRD analysis, iodometric titration and IR-spectroscopy of the degraded samples suggest that the $YBa_2Cu_3O_{7-{\delta}}$ decomposes in three steps such as the reduction of $Cu^{3+}$ to $Cu^{2+}$, followed by the hydroxylation of $Ba^{2+}$ and $Y^{3+}$ via hydration and finally the formation of carbonates through the uptake of ambient $CO_2$.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.160-163
• /
• 2001

본 연구에서는 Fe$^{0}$ /$H_2O$$_2$ 시스템을 이용하여 디젤 오염토양의 산화처리효율과 경제성 향상을 위한 실험을 수행하였다. 앞선 연구결과에서 최적 pH조건은 3이었으며, 과산화수소와 철 분말의 양은 비례적으로 증가할수록 처리효율이 높게 나타났다. 1) 이번 연구에서는 pH조절에 따른 처리효율의 향상효과를 알아보기 위해 pH 값을 3으로 일정하게 유지하여 반응을 수행하였으며, 일정 철 분말 농도조건에서 과산화수소의 주입방법에 따른 반응변화를 살펴보기 위해 과산화수소를 여러 비율로 분할 주입하면서 실험을 실시하였다. 본 연구결과에 따르면 pH를 3으로 일정하게 유지함으로써 초기에만 pH를 3으로 조정한 이전의 연구에서 반응이 경과함에 따라 나타나는 pH상승에 따른 처리효율의 감소 효과를 줄며 전체적인 TPH 처리효율을 10%이상 높일 수 있었으며, 같은 양의 TPH 제거에 소모되는 과산화수소의 양을 20% 정도 줄일 수 있었다. 과산화수소의 분할주입에 따른 반응향상효과 실험에서는 5회에 걸쳐 분할 주입한 경우에 3시간 이후 경미한 반응성 향상효과를 얻을 수 있었다. 이러한 결과는 과산화수소를 분할하여 주입함으로써 한번에 주입한 경우에 비하여 유기물의 산화에 직접적으로 참여하지 않는 과산화수소의 scavenging 효과를 최소화할 수 있음을 보여주는 것이다. 따라서 최적 pH의 일정 유지와 과산화수소의 분할주입으로 철 분말을 이용한 펜톤유사반응의 처리효율과 경제성 제고 모두에 있어서 효과가 있음을 알 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.309-317
• /
• 1996

Al2O3 thin films were deposited on Si-wafer (100) using organo-aluminum compounds at low pressure by chemical vapor deposition (CVD) method. The vapor of the organo-metallic precursor was carried by pure N2 gas. The deposition rate increased and then saturated as Tsub increased with increasing the AIP flow rate. The main contamination didn't found in deposited films except carbon. The H-O(H2O) IR absorption band decreased in intensity as the deposition temperature increased, and completely disappeared through annealing.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.3
• /
• pp.256-260
• /
• 1995

Laser induced fluorescence spectra of OH produced from photodissociation of $H_2O_2$ at 280-290 nm in the gas phase have been observed. By analyzing the Doppler profiles, the anisotropy parameter($\beta$ =-0.7) and the center of mass translational energy of the fragments have been measured. The measured energy distribution is well described by an impulsive model. The excited state leading to dissociation is found to be of 1Au symmetry. The dissociation from this state is prompt and direct with the fragment OH rotating in the plane perpendicular to the O-O bond axis.