• Food Science and Preservation
• /
• v.5 no.4
• /
• pp.380-385
• /
• 1998

The sensitivity of various pathogenic bacteria(Aeromonas hydrophila, Escherichia coli O157:H7, Listeria monocytogenes, Staphylococcus aureus 196E, Salmonella typhimurium) to the ethanol extract of pine needle was tested. Tryptic soy broth containing 0-2%(w/v) of the ethanol extract of pine needle was inoculated with 10$^4$-10$\^$6/ CFU/ml of pathogenic bacteria and incubated at 35$^{\circ}C$ for 48 hours. Gram positive bacteria(L. monocytogenes and S. aureus 196E) and 1 Gram negative bacteria(A. hydrophila) were more sensitive than E. coli O157:H7 and S. typhimurium in the ethanol extract of Pine needle. Gram negative bacteria(E. coli O157:H7 and S. typhimurium) were not inhibited at 1% and they were slightly inhibited at 2% ethanol extract of pine needle. S. aureus was the highest sensitivity, followed by A. hydrophila, L. monocytogenes E. coli O157:H7 in that order. S. typhimurium was the most resistant to the ethanol extract of pine needle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.87-87
• /
• 2010

Adsorption and subsequent catalytic reactions of ethanol and acetaldehyde on chemically modified rutile TiO2(001) surfaces are probed by x-ray photoemission spectroscopy (XPS) using synchrotron radiation. TiO2 is a well-known photocatalyst for various catalytic reactions including oxidation of organic molecules. In this respect, the surface atomic structure has been found to play a vital role in determining the catalytic reactivity and selectivity of TiO2. In this study, we employ an atomically well-ordered reduced TiO2(001) surface which is prepared in a UHV chamber by repeated Ar+-sputtering and annealing (900 K) cycles. We systematically modify the surface by treating the surface with H2O or O2 at room temperature (RT). The catalytic reactivity of the surface-modified TiO2(001) is evaluated by dosing ethanol/acetaldehyde onto the surface at RT and by subsequent annealing to higher temperatures (400~600 K). XPS spectra of C 1s core level are intensively used to probe any change in the oxidation state of carbon atoms. We find that the reactivity as well as the saturation coverage are significantly affected by the RT-treatment of the TiO2 surface with H2O or O2. For both reactant molecules (ethanol/acetaldehyde), oxidation reactions are found to be enhanced on the O2-treated surface compared with the reduced or H2O-treated surfaces. Possibly reaction pathways are discussed based on the observed XPS spectra.

• Korean Journal of Materials Research
• /
• v.25 no.2
• /
• pp.95-99
• /
• 2015

$NiAl_2O_4$ nanoparticle was synthesized by a reverse micelle processing for inorganic pigment. $Ni(NO_3)_2{\cdot}6H_2O$ and $Al(NO_3)_3{\cdot}9H_2O$ were used for the precursor in order to synthesize $NiAl_2O_4$ nanoparticles. The aqueous solution, which consisted of a mixing molar ratio of Ni/Al, was 1:2 and heat treated at $800{\sim}1100^{\circ}C$ for 2h. The average size and distribution of synthesized $NiAl_2O_4$ powders are in the range of 10-20 nm and narrow, respectively. The average size of the synthesized $NiAl_2O_4$ powders increased with an increasing water-to-surfactant molar ratio and heating temperature. The crystallinity of synthesized $NiAl_2O_4$ powder increased with an increasing heating temperature. The synthesized $NiAl_2O_4$ powders were characterized by X-ray diffraction analysis(XRD), a field emission scanning electron microscopy(FE-SEM), and a color spectrophotometer. The properties of synthesized powders were affected as a function such as a molar ratio and heating temperature. Results indicate that synthesis using a reverse miclle processing is a favorable process to obtain $NiAl_2O_4$ spinels at low temperatures. The procedure performed suggests that this new synthesis route for producing these oxides has the advantage of being fast and simple. Colorimetric coordinates indicate that the pigments obtained exhibit blue colors.

• Journal of Surface Science and Engineering
• /
• v.53 no.2
• /
• pp.72-79
• /
• 2020

Two Fe-Cr steels of T22 steel and STS430 steel were corroded at 650 and 750℃ for 100hr in sewage sludge-(0.3% SO₂-6% O₂-10% H₂O-balance CO₂) mixed gas environment. T22 steel corroded faster than STS430, indicating that the Cr content significantly influence the corrosion rates. T22 formed thick and non-protective Fe₂O₃ as the major oxide and Fe₃O₄ as the minor one. With an increase in corrosion temperature, their corrosion rates increased, being accompanied with formation of pores and cracks in the thickened oxide scales that were non-adherent. STS430 steel formed Fe₂O₃, Fe₃O₄ as the outer scale and (Fe, Cr)-O as the inner layer by which its corrosion rate is greatly reduced. Both the T22 and STS430 steel samples formed multi-layered scales by outward diffusion of Fe ions and inward diffusion of oxygen and sulfur ions at high-temperature more than 650℃.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.6
• /
• pp.717-729
• /
• 2019

The chemical informs about 70 individual phenolic compounds were constructed from various lettuce samples based on literature sources and analytical data. A total of 30 phenolic compounds including quercetin 3-O-glucuronide, quercetin 3-O-(6''-O- malonyl) glucoside, cyanidin 3-O-(6''-O-malonyl)glucoside, chlorogenic acid and chicoric acid as major components were identified in 6 lettuce samples from Korea using UPLC-DAD-QToF/MS on the basis of constructed library. Among these, quercetin 3,7-di-O-glucoside(m/z 627 [M+H]⁺), quercetin 3-O-(2''-O-malonyl)glucoside(morkotin C, m/z 551 [M+H]⁺), quercetin 3-O-(6''- O-malonyl)glucoside methyl ester(m/z 565 [M+H]⁺), 5-O-cis-p-coumaroylquinic acid(m/z 339 [M+H]⁺) and 5-O-caffeoylquinic acid methyl ester(m/z 369 [M+H]⁺) were newly confirmed from the lettuce samples. In total content of phenolic compounds, 4 red lettuce samples(2,947.7~7,535.6 mg/100 g, dry weight) showed higher than green lettuce(2,687.3 mg) and head lettuce(320.1 mg).

• Applied Biological Chemistry
• /
• v.30 no.1
• /
• pp.77-87
• /
• 1987

The mutant with high productivity, X. malvacearum SNUF 560-6, was acquired from the X. malvacearum SNUF 560 with low productivity by UV-light irradiation. It was preserved is lyophilized stock culture and it was transferred to PDA slant to maintain viability fortnightly. Fermentations were started by retransfering to MY agar slant from PDA stok culture. The experiments for optimal xanthan gum production were studied in a chemically defined medium. Of the carbon and nitrogen sources tested, 0.4% sucrose medium and 10mM glutamic acid medium yielded the highest xanthan gun production respectively. The addition of 10g/l succinic acid stimulated xanthan gum production. Also 65mM $PO_4\;^{-3}\;(12.6g/l\;KH_2PO_4)$ was effective on xanthan gum production. Finally, medium 1 and medium 2 which have high xanthan gum production potencies were achieved in this stud. The components of medium 1 and medium 2 were as follows: Medium 1 : sucrose 40g/l glutamate 10mM $PO_4\;^{-3}\;54mM\;(KH_2PO_4\;12.65g/l)$ Citrate 2g/l $MgSO_4{\cdot}7H_2O\;0.2g/l$ $H_3BO_3\;0.005/l$ ZnO 0.006/l $FeCl_2{\cdot}6H_2O\;0.0024g/l$ $CaCO_3\;0.02g/l$ Medium 2 : $Sucrose\;40g/l\;(NH_4)_2SO_4\;2g/l$ $PO_4\;^{-3}\;65mM\;(KH_2PO_4\;12.65g/l)$ Succinate 10g/l $MgSO_4{\cdot}7H_2O\;0.02g/l$ $H_3BO_3\;0.06g/l$ ZnO 0.006g/l $FeCl_2{\cdot}6H_2O\;0.0024g/l$ $CaCO_3\;0.02g/l$.

• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.102-109
• /
• 2000

It is difficult to meet the cleanliness requirement of $10^{10}/\textrm{cm}^2$ for the giga level device fabrication with mechanical cleaning techniques like scrubbing which is widely used to remove the particles generated during Chemical Mechanical Polishing (CMP) processes. Therefore, the second cleaning process is needed to remove metallic contaminants which were not completely removed during the mechanical cleaning process. In this paper the experimental results for the removal of the metallic contaminants existing on the wafer surface using remote plasma $H_2$ cleaning and UV/$O_3$ cleaning techniques are reported. In the remote plasma $H_2$ cleaning the efficiency of contaminants removal increases with decreasing the plasma exposure time and increasing the rf-power. Also the optimum process conditions for the removal of K, Fe and Cu impurities which are easily found on the wafer surface after CMP processes are the plasma exposure time of 1min and the rf-power of 100 W. The surface roughness decreased by 30-50 % after remote plasma $H_2$ cleaning. On the other hand, the highest efficiency of K, Fe and Cu impurities removal was achieved for the UV exposure time of 30 sec. The removal mechanism of the metallic contaminants like K, Fe and Cu in the remote plasma $H_2$ and the UV/$O_3$ cleaning processes is as follows: the metal atoms are lifted off by $SiO^*$ when the $SiO^*$is evaporated after the chemical $SiO_2$ formed under the metal atoms reacts with $H^+ \; and\; e^-$ to form $SiO^*$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.49-49
• /
• 2011

실리콘 태양전지에 사용되는 ZnO 박막의 특성은 적외선과 가시광선 영역에서 높은 투과도 (>80%)와 낮은 비저항(<10-2) 외에 산란(scattering)에 의한 빛의 광학적 경로(optical path) 증가로 활성층(active layer)에서의 광 흡수도 증가 및 입사광의 재반사를 방지할 수 있는 표면 형상(morphology)의 제어가 중요하다. 일반적으로 우선 배향성(preferred orientation)이 <0002>방향으로 texturing된 ZnO박막보다 <1120>방향으로 texturing된 박막이 더 우수한 광 산란 효과를 보인다. 따라서, 이 논문에서는 유기화학증착공정으로 증착한 ZnO 박막의 texture 형성에 있어 박막 증착 온도 및 원료로 사용하는 DEZ(Diethylzinc)와 H2O의 상대농도 변화에 따른 texture 방향의 변화에 대해 고찰하였다. 반응기내의 압력을 0.67 torr로고정하고 기판온도를 $90^{\circ}C$에서 $170^{\circ}C$까지 $20^{\circ}C$간격으로 증가시키고, $120^{\circ}C$에서 H2O/DEZ의 비를 0.1에서 4까지 변화시켰다. 기판온도가 증가함에 따라 ZnO박막의 texture 방향은 <0002>에서 <1120> 방향으로 변화하였다. 또한 $120^{\circ}C$에서 H2O/DEZ 비가 증가함에 따라 ZnO 박막의 texture 방향은 <0002>에서 <1120> 방향으로 변화하였다. 이에 따른 광투과, 광산란 특성과 전기적 특성의 변화를 조사하였다.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.465-472
• /
• 1988

Alpha alumina powder with fine particle size and narrow particle size distribution was prepared by precipitation method using Al2(SO4)3.18H2O as a starting material. The alpha alumina powder was prepared by calcining aluminum hydroxide which was formed under various pH values. The sinterabilityof alpha alumina powder and the effect of MgO on the sinterability of alpha alumina powder were investigated. The sinterability of alpha alumina powder was the order of pH=10≒pH11>pH=7≒pH9, and alpha alumina obtained from boehmite which was prepared by precipitation method reached to 97.5% of theoretcal density by the pressureless sintering. The effect of MgO on volume shrinkage of alumina was very slight in the initial sintering stage but remarkable in the final sintering stage. It was also found that MgO controlled effectively the grain growth of alumina.

• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.82-85
• /
• 2002

From the reaction of cis,cis,trans- [MoBr/sub 2/(CO)/sub 2/(PPh/sub 3/)/sub 2/］with 2,6-dimethylphenyl isocyanide, a molybdenum oxohaloisocyanide compound cis,fac-[Mo(O)Br/sub 2/,(CN-C/sub 6/H/sub 3/,-2,6-Me/sub 2/)sub 3/] (1) was iso-lated. Compound 1 was characterized by spectroscopy (/sup 1/H-NMR, /sup 13/C｛/sup 1/H｝-NMR, IR) and X-ray diffraction. Crystallographic data for 1: triclinic space group P(equation omitted), a=9.172(2) (equation omitted), b ＝ 11.550(3) (equation omitted), c ＝ 15.106(3) (equation omitted), α ＝ 100.44(2)°, β＝ 107.12(2)°, γ＝ 107.83(1)°, Z ＝ 2, R(wR/sub 2/) ＝ 0.0529(0.1344).