• Korean Journal of Pharmacognosy
• /
• v.16 no.4
• /
• pp.233-238
• /
• 1985

A number of sedative alkaloids were isolated from Sanjoin(酸棗仁), the seeds of Zizyphus vulgaris Lamark var. spinosus Bunge (Rhamnaceae) which is an important Chinese medicinal material used to treat insomnia and sometimes to treat sleepiness. Those compounds were designated as Sanjoinine-A, B, C, D, etc. depending on the order of increasing polarity. Sanjoinine-A, $C_{31}H_{42}N_4O_4$, $mp\;249^{\circ}$, $[{\alpha}]^{27}_D-316$, Sanjoinine-B, $C_{30}H_{40}N_4O_4$, $mp\;212{\sim}4^{\circ}$, Sanjoinene, $C_{29}H_{35}N_3O_4$, $mp\;281{\sim}2^{\circ}$, $[{\alpha}]^{22}_D-272$, Sanjoinine-D, $C_{32}H_{46}N_4O_5$, $mp\;256{\sim}8^{\circ}$, $[{\alpha}]^{22}_D-53.6$, Sanjoinine-F, $C_{31}H_{42}N_4O_5$, $mp\;228{\sim}9^{\circ}$, $[{\alpha}]^{22}_D-215$, and $Sanjoinine-G_1,\;C_{31}H_{44}N_4O_5,\;mp\;236{\sim}8^{\circ},\;[{\alpha}]^{22}_D-68.6$, were found as 14-membered cyclic peptide alkaloids, $Sanjoinine-G_2,\;C_{30}H_{42}N_4O_4,\;mp\;182^{\circ},\;[{\alpha}]^{22}_D-79.2$, as being open chain peptide alkaloid, and Sanjoinine-E, $C_{19}H_{21}NO_2$, $mp\;166^{\circ}$, $[{\alpha}]^{20}_D-146.2$, N-Methylasimilobine, $C_{18}H_{19}NO_2$, $mp\;193{\sim}5^{\circ}$, $[{\alpha}]^{20}_D-204$, Sanjoinine-Ia, $C_{18}H_{19}NO_2$, $mp\;155{\sim}7^{\circ}$, $[{\alpha}]^{20}_D-140$, Sanjoinine-Ib, $C_{19}H_{21}NO_4$, $mp\;184^{\circ}$, Sanjoinine-K, $C_{16}H_{19}NO_3$, $mp\;159{\sim}61^{\circ}$, $[{\alpha}]^{20}_D+35$, Caaverine, $C_{17}H_{17}NO_2$, $mp\;204^{\circ}$, $[{\alpha}]^{20}_D-80$, and Zizyphusine, $C_{20}H_{24}NO_4$, $mp\;214{\sim}6^{\circ}$, $[{\alpha}]^{20}_D+317$ as being aporphine alkaloids. The heat treatment of the cyclic peptide alkaloids produced their isomeric products which showed enhanced sedative activity. The chemical structure of the isomeric products will be discussed.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.147-154
• /
• 2009

The change of strength and water vapour diffusion resistant by soluble salts was investigated in the tuff and granite used in many stone monuments of Gyeongju area. With $Na_2SO_4$ and $CaSO_4{\cdot}2H_2O$ were treated the rock samples to understand the difference of solubility. The densities of the tested rocks were increased by the impregnation of $CaSO_4{\cdot}2H_2O$ and $Na_2SO_4$. The flexural strength was increased in the tuff samples but decreased in the granite as the salts increased in the pore. In the tuff, the uniaxial compressive strength was increased by $CaSO_4{\cdot}2H_2O$, but decreased by $Na_2SO_4$. In the granite, it was decreased slightly by $CaSO_4{\cdot}2H_2O$, but increased by $Na_2SO_4$. The water vapour diffusion resistant was increased by the salts in both rocks. As results, it was cleared that the mechanical strength colud be increased in early stage of weathering by the accumulation of salt and water vapour diffusion resistant.

• Korean Journal of Materials Research
• /
• v.24 no.8
• /
• pp.413-416
• /
• 2014

The effects of an addition of CNT on the sensing properties of nano ZnO:CNT-based gas sensors were studied for $H_2S$ gas. The nano ZnO sensing materials were grown by a hydrothermal reaction method. The nano ZnO:CNT was prepared by ball-milling method. The weight range of the CNT addition on the ZnO surface was from 0 to 10%. The nano ZnO:CNT gas sensors were fabricated by a screen-printing method on alumina substrates. The structural and morphological properties of the ZnO:CNT sensing materials were investigated by XRD, EDS, and SEM. The XRD patterns revealed that nano ZnO:CNT powders with a wurtzite structure were grown with (1 0 0), (0 0 2), and (1 0 1) dominant peaks. The size of the ZnO was about 210 nm, as confirmed by SEM images. The sensitivity of the nano ZnO:CNT-based sensors was measured for 5 ppm of $H_2S$ gas at room temperature by comparing the resistance in air with that in target gases.

• Resources Recycling
• /
• v.4 no.3
• /
• pp.32-39
• /
• 1995

Thc purpose of this study is to develop the efficient process for recovering vanadium and nickel from the incineralionash of the oil fly ash. In this paper, the physical and chemical properties of the incineration ash was examined, and theleaching characteristics of the incineration ash were investigated by water leaching and sulEuric acid leaching tcsls. The incinerationash of oil fly ash was mainly consisted of oxldes such as V,09, V,O,, NaVO,, Ni,(VO,)Z, Fe,O,, CaSO,, SiO,.Thc waler leaching showed low extraction of metallic components, while the sulfunc acid lcaching with high temperahlreand pressure increased the extraction of vanadium and nickcl considerably. For instance, the exlraction rates of the metalllccomponents on the sulfuric acid leaching were 99% for V and 45% for Ni at 90$^{\circ}$C with pH 0.5 H,SO,, and were86% for V and 75% far Ni at ZOO"C(64 psi) with pH 1.0 H-SO,. with pH 1.0 H-SO,.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.11a
• /
• pp.34-35
• /
• 1993

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.170.2-170.2
• /
• 2000

• Journal of the Korean Ceramic Society
• /
• v.35 no.5
• /
• pp.521-527
• /
• 1998

Electrical conductivity of fluorite structure phases in the {{{{ {Y }_{0.8 } }}{{{{ { Ta}_{ 0.2} {O }_{1.7 }-MgO }} system has been studied. Electrical conductivity of 8mol% MgO doped {{{{ {Y }_{0.8 } }} {{{{ {Ta }_{0.2 } {O }_{1.7 } }} fluorite phase was lower than that of the undoped {{{{ {Y }_{0.8 } }}{{{{ {Ta }_{0.2 } {O }_{1.7 } }} When {{{{ { P}_{H2O } }} was increased electrical conductivity of {{{{ {Y }_{0.8 } }}{{{{ {Ta }_{0.2 } {O }_{1.7 } }} increased linealy with {{{{ { P}`_{H2O } ^{ {1 } over {2 } } }} The {{{{ {Y }_{0.8 } }}{{{{ {Ta }_{0.2 } {O }_{1.7 } }} fluorite phase exhibited higher electrical conductivity in wet atmosphere than in dry atmosphere. The identical trend was observed from the 8mol% MgO doped {{{{ {Y }_{0.8 } }}{{{{ {Ta }_{0.2 } {O }_{1.7 } }} fluorite phase.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.107-116
• /
• 1992

The optimum base material was selected by the thermal decomposition temperature of $CH_{3}CN$ on the surface of various metal oxides, and the FT-IR analyses of its products. On the surface of $SnO_{2}$, $CH_{3}CN$ was initiated to decompose at $130^{\circ}C$ and produced a lot of products at $200^{\circ}C$. The products from the reaction were found to be $H_{2}O$, $NH_{3}$ and CO, but $N_{2}O$ has started to produce at $320^{\circ}C$. The sensing characteristics of $SnO_{2}$ sensor to $CH_{3}CN$ are influenced by the absorbed species which are produced by the oxidation reaction of $CH_{3}CN$ on the surface of metal oxide. The gaseous species produced from the surface of sensing material in the oxidation reaction were found to be CO, $NH_{3}$, $H_{2}O$ and $NO_{x}$ etc.. It was assumed that the amount of $NO_{x}$ play a great role to the determining sensing properties. In the condition of 170 ppm $CH_{3}CN$, the sensitivity and optimum operating temperature of $SnO_{2}$ were 70% and $300^{\circ}C$, respectively. In this research, the response time of $CH_{3}CN$ to $SnO_{2}/Al_{2}O_{3}/Pd$ sensor added with 0.2 wt % Pd was found about 10 sec and sensitivity was also found relatively high.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1295-1296
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.827-828
• /
• 2008