• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1220-1225
• /
• 2008

This study was conducted to investigate the protective effect of genistein on the antioxidative defence system and membrane fluidity in chick skeletal muscle cells after supplementation with 0, 20, 40, and $80{\mu}mol/L$ genistein in $50{\mu}mol/L$ $FeSO_4/H_2O_2$ treated cells for 24 h. Genistein supplementation recovered the decreased activity of total superoxide dismutase induced by $FeSO_4/H_2O_2$, significantly increased glutathione peroxidase activity (p<0.05) and decreased malondialdehyde production (p<0.05). The treatment of 80 mol/L genistein in $FeSO_4/H_2O_2$ treated cells decreased the secretion of creatine kinase (p<0.05). Fluorescence polarization values and microviscosities observed with $FeSO_4/H_2O_2$ treated cells were significantly higher than those observed with no $FeSO_4/H_2O_2$ treated cells. The addition of $80{\mu}mol/L$ genistein improved the increased fluorescence polarization value (p<0.05) caused by $FeSO_4/H_2O_2$ treatment. The microviscosity value was significantly decreased by adding genistein (p<0.05). In conclusion, genistein protected skeletal muscle cells from oxidative damage by improving antioxidative status and membrane fluidity.

• Advances in Energy Research
• /
• v.4 no.2
• /
• pp.177-187
• /
• 2016

Ammonia borane $NH_3BH_3$ solubilized in organic solvent is a potential liquid-state chemical hydrogen storage material. In this study, metal acetylacetonates like $Fe(O_2C_5H_7)_3$, $Co(O_2C_5H_7)_2$, $Ni(O_2C_5H_7)_2$, $Pd(O_2C_5H_7)_2$, $Pt(O_2C_5H_7)_2$ and $Ru(O_2C_5H_7)_3$ are considered for assisting dehydrocoupling of ammonia borane in diglyme (0.135 M) at $50^{\circ}C$. The molar ratio between ammonia borane and metal acetylacetonate is fixed at 100. A protocol for the separation of the soluble and insoluble fractions present in the slurry is proposed; it consists in using acetonitrile to make the precipitation of metal-based compounds easier and to solubilize boron-based intermediates/products. The nature of the metal does not affect the dehydrocoupling mechanisms, the $^{11}B\{^1H\}$ NMR spectra showing the formation of the same reaction intermediates. The aforementioned metal acetylacetonates do mainly have effect on the kinetics of dehydrocoupling. Dehydrocoupling takes place heterogeneously and dehydrogenation of ammonia borane in these conditions leads to the formation of polyborazylene via intermediates like e.g., B-(cyclodiborazanyl) amine-borane and borazine. Our main results are reported and discussed herein.

• Korean Journal of Veterinary Service
• /
• v.30 no.3
• /
• pp.291-304
• /
• 2007

Mutants of an obligate aerobic bacterium, Vitreoscilla, that have deficiency in heat-labile catalase-peroxidase hydroperoxidase I (HPI) were created by EMS treatment. The catalase-peroxidase HPI-deficient mutant showed substantially lower peroxidase activity in exponential and mid-stationary phase compared with the wild type strain. In late stationary phase, the mutant exhibited no peroxidase activity. Peroxidase deficiency in the mutant was revealed by polyacrylamide gels stained for peroxidase activity. Characteristically, catalase levels in the mutant increased about 14- and 8-fold during growth in the exponential and stationary phases, respectively, compared to those in the wild type, suggesting a compensatory effect for protection from $H_2O_2$ toxicity. The mutant showed differences in physiology from the wild type: retardation in growth rate and decrease in oxygen consumption. Both the wild type and the catalase-peroxidase HPI-deficient mutant of Vitreoscilla had lower growth rates in media containing increasing $H_2O_2$ concentrations. However, the mutant exhibited an additionally decreased growth rate after 6 to 8 h of growth compared to the wild type. The wild type was resistent up to 20 mM $H_2O_2$, whereas the mutant was very sensitive to high concentrations of exogenous $H_2O_2$. Although elevated catalase levels would provide protection of the bacteria from the deleterious effect of $H_2O_2$, it did not appear to be complete. Cell-free extracts of the mutant showed decreased NADH oxidation rates and higher accumulation of $H_2O_2$ during this oxidation. These results may account for the impaired growth and earlier onset of death phase by the catalase-peroxidase HPI-deficient mutant of Vitreoscilla.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.740-744
• /
• 2005

Perovskite-type oxide $La_{1-x}Sr_xCo_{1-y}Fe_yO_{3-{\delta}}$ sols were prepared by sol-gel method using $La(NO_3)_3{\cdot}xH_2O$, $Sr(NO_3)_2$, $Co(NO_3)_2{\cdot}6H_2O$ and $Fe(NO_3)_3{\cdot}9H_2O$ as starting materials. The properties of the perovskite-type oxide sols were investigated by viscometer, FT-IR, TG-DTA and XRD. The prepared sols showed 1.16 cp in average viscosity, and a strong acidic condition of pH 0.5, irrespective of composition of the starting materials. The viscosity of sols at the same volume decreases, but the gelation time of sols, at which the sol viscosity increases rapidly, increases when increasing La concentration in composition of starting materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.190-195
• /
• 2000

The electrical properties and stability of ZPCE varistors consisted of $ZnO-Pr_6O_{11}-CoO-Er_2O_3$ ceramics were investigated. $ZnO-Pr_6O_{11}-CoO-Er_2O_3$ based ceramics were sintered at $1300^{\circ}C$ and $1350^{\circ}C$, respectively, without and with 0.5 mol% $Er_2O_3$. The varistors sintered at $1300^{\circ}C$ exhibited a better nonlinearity than that $1350^{\circ}C$. The varistors with $Er_2O_3$ of 0.5 mol% exhibited a high nonlinear exponent of 52.8. However, they easily degraded due to the low density below 85% of TD. On the other hand, the varistors sintered at $1350^{\circ}C$ without $Er_2O_3$ exhibited an extremely poor nonlinearity, but the varistors with $Er_2O_3$ of 0.5 mol% exhibited a relatively good nonlinearity, which the nonlinear exponent is 34.8 and the leakage current is $7.4\;{\mu}A$ Morever, they exhibited a very high stability, which the variation rate of varistor voltage, nonlinear exponent, and leakage current are -0.9%, -2.9%, and +2.7%, respectively, under the third stress $(0.80 V_{1mA}/90^{\circ}C/12h)$ + $(0.85 V_{1mA}/115^{\circ}C/12h)$ + $(0.90 V_{1mA}/120^{\circ}C/12h)$. Consequently, it was estimated that $ZnO-Pr_6O_{11}-CoO-Er_2O_3$ ceramics will be usefully applied to develop the advanced $Pr_6O_{11}$-based ZnO varistors.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.147-151
• /
• 2007

Cu-free multi-component sol, of which final oxide composition becomes $Bi_{1.9}Pb{0.35}SrCaO,\;Bi_{1.8}Pb_{0.2}SrCaO\;and\;Bi_{1.5}SrCaO$, respectively, was prepared through sol-gel route and coated on a bare Cu substrate. Starting materials were metal-alkoxides as follows.; [$Bi(OC_{2}H_{5})_{3}\;Pb(O^{1}C_{3}H_{7})_{2},\;Sr(O^{i}C_{3}H_{7})_{2},\;Ca(OC_{2}H_{5})_{2}$] as a reagent grade. Transparent light yellowish sol was obtained in the case of $Bi_{1.9}Pb_{0.35}SrCaO\;and\;Bi_{1.8}Pb_{0.2}SrCaO$ composition and $Bi_{1.5}SrCaO$ composition's sol was light greenish. Each sol was repeatedly dip-coated on Cu substrate four times and pre-heated at $400^{\circ}C$ and finally heat-treated in the range of $740{\sim}900^{\circ}C$. In the results, crystalline phases confirmed by XRD were (2201) orthorhombic and monoclinic phases. However, only $Bi_{1.9}Pb_{0.35}SrCaO_{x}$ composition showed pseudo-superconductive behavior after heat-treatment at $900^{\circ}C$ for 12 seconds and then onset temperature was 77 K, even though it did not exhibit zero resistance below Tc.

• Journal of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.283-287
• /
• 1963

The distribution ratio of hydrogen cupferrate in $H_2O-CHCl_3$ system was considered as a function of pH ($HClO_4$), ionic strength ($NaClO_4$), and cupferron concentration in perchloric acid media, respectively. The values were independent upon pH (1.50∼3.00 range) and ionic strength (0.1∼2.00 range), but they increased as increasing the cupferron concentration in the acidic media. At the infinite dilution, the thermodynamic distribution ratio between chloroform and aqueous phase was 120. 0. The activity coefficients of hydrogen cupferrate in chloroform solution were determined by the distribution ratio. This activity coefficient may be calculated by using the empirical equation, $-log\;f_{CHCl3}=0.1285C_{CHCl3}+{7.775C^2}_{CHCl3}$ which represents the experimental data quite well for the solution in 0.1 mole/l order of hydrogen cupferrate concentration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.418.2-418.2
• /
• 2016

$Al_2O_3$ passivation layer has excellent passivation properties at p-type Si surface. This $Al_2O_3$ layer forms thin $SiO_2$ layer at the interface. There were some studies about inserting thermal oxidation process to replace naturally grown oxide during $Al_2O_3$ deposition. They showed improving passivation properties. However, thermal oxidation process has disadvantage of expensive equipment and difficult control of thin layer formation. Wet chemical oxidation has advantages of low cost and easy thin oxide formation. In this study, $Al_2O_3$/$SiO_2/Si(100)$ interface was formed by wet chemical oxidation and PA-ALD process. $SiO_2$ layer at Si wafer was formed by $HCl/H_2O_2$, $H_2SO_4/H_2O_2$ and $HNO_3$, respectively. 20nm $Al_2O_3$ layer on $SiO_2/Si$ was deposited by PA-ALD. This $Al_2O_3/SiO_2/Si(100)$ interface were characterized by capacitance-voltage characteristics and quasi-steady-state photoconductance decay method.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1013-1021
• /
• 2020

A combination of simultaneous thermal analysis, evolved gas analysis and non-ambient XRD techniques was used to characterise and investigate the conversion reactions of ammonium uranates into uranium oxides. Two solid phases of the ternary system NH₃ - UO₃ - H₂O were synthesised under specified conditions. Microspheres prepared by the sol-gel method via internal gelation were identified as 3UO₃·2NH₃·4H₂O, whereas the product of a typical ammonium diuranate precipitation reaction was associated to the composition 3UO₃·NH₃·5H₂O. The thermal decomposition profile of both compounds in air feature distinct reaction steps towards the conversion to U₃O₈, owing to the successive release of water and ammonia molecules. Both compounds are converted into α-U₃O₈ above 550 ℃, but the crystallographic transition occurs differently. In compound 3UO₃·NH₃·5H₂O (ADU) the transformation occurs via the crystalline β-UO₃ phase, whereas in compound 3UO₃·2NH₃·4H₂O (microspheres) an amorphous UO₃ intermediate was observed. The new insights obtained on these uranate systems improve the information base for designing and synthesising minor actinide-containing target materials in future applications.

• Korean Journal of Crystallography
• /
• v.6 no.2
• /
• pp.98-102
• /
• 1995

The crystal structure of -Ethyl-1,4-dihydro-7-methyl-1,8-naphthyridin-4-one-3-carboxylic acid [Nalicixic Acid] has been determined from single crystal X-ray diffraction study; C12H12N2O3, monoclinic, P21/c, a=8.910(2)Å, b=13.145(3)Å, c=9.370(3)Å, β =100.06(2)°, V=1080.6Å, T=293K, Z=4, CuKα(λ=1.5418Å). The molecular structure was solved by direct method and refined by full-matrix least squares to a final R=0.055 for 1555 unique observed [F0>4σ(F0)] reflections and 166 parameters. The conformation of the molecule is stabilized by an intramolecular O(17)-H(17)…O(14) hydrogen bond [2.525(2)Å, 144.3(10)°].