• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.333-340
• /
• 2019

레드머드(Red mud)는 보크사이트(Bauxite)를 원료로 알루미나를 제조하는 공정에서 발생하는 산업부산물이다. 한국의 경우 베이어프로세스 공정을 통하여 Al2O3 1톤을 생산할 경우 함수율 50%의 레드머드가 약 2톤이 발생된다. 강알칼리성의 레드머드를 중화시킴으로서 재활용을 증대시킬 수 있고 보관 및 관리 측면에서 환경부하를 저감시킬 수 있다. 더욱이 재활용하기 위해 가열 및 분쇄 공정이 필요없는 액상화 레드머드에 대한 관심이 증대되고 있다. 따라서 본 논문에서는 질산 및 황산의 첨가량에 따른 액상화 레드머드의 pH 변화를 검토한 후 중화시킨 액상화 레드머드의 첨가량에 따른 시멘트 페이스트의 압축강도 특성을 비교 검토하였다. 그 결과 질산 및 황산으로 중화시킨 액상화 레드머드의 압축강도는 중화하지 않은 액상화 레드머드와 비교하여 상대적으로 높게 나타났다.

• 자원리싸이클링
• /
• 제18권6호
• /
• pp.18-23
• /
• 2009

염화알루미늄 수용액으로부터 알루미늄 유기화합물인 구연산알루미늄 합성실험을 수행하였다. 수용액중 알루미늄 농도와 구연산 농도비율은 몰비 2.5가 되도록 첨가해 주었으며, 합성된 구연산알루미늄은 화학분석, X-선 회절분석, 입도분석 및 SEM 분석을 통하여 시료특성을 평가하였다. 알루미늄 수용액으로부터 구연산알루미늄을 합성하기 위해서는 에탄올/알루미늄 수용액 혼합비율을 4.0이상으로 유지하여야 하는 것으로 나타났다. 또한, 97% 이상의 회수율을 얻기 위해서는 혼합액의 pH를 7.0이상으로 조절하여야 하는 것으로 나타났다. 합성반응을 통해 얻은 구연산알루미늄의 화학분석결과 $NH_4$ 17.0%, Al 4.01% 및 C 25.7%이었으며, 이의 화학식은 $(NH_4)_5Al(C_6H_4O_7)_2{\cdot}2H_2O$임을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1392-1400
• /
• 1995

WC-10wt%Co-Al2O3 ceramic composites, using both the SHS (Self-propagating High Temperature Synthesis) synthesized WC powder method and commercial WC powder, were prepared by varing WC-Co/Al2O3 vol% ratio and sintering temperature (1350℃∼1650℃) for 1 hr in Ar atmosphere. Mechanical characterization has been investigated by Instron meterial testing system and Vicker's hardness test. Compositional and structural chracterizations were carried out by energy-dispersive analysis of X-ray (EDAX) data and scanning electron microscope (SEM). Electrical characterization was carried out by the electrical resistivity measurement using 4-point probe method. As sintering period increased and Al2O3 contents decreased in WC-10wt%Co-Al2O3 ceramic composite, shrinkage and relative density increased, resulting in maximum values at 1600℃. Also the major matrix phase changed with increasing Al2O3 content from 0 to 100 vol%. It was also identified by SEM, EDAX, and electrical resistivity measurement. Based on the results of analysis of flexural strength, toughness and hardness, the mechanical properties of WC-10wt%Co-Al2O3 ceramic composites using the SHS synthesized WC powder were better than those WC-10wt%Co-Al2O3 ceramic composites using commercial WC powder because WC-10wt%Co-Al2O3 ceramic composites using the SHS synthesized WC powder were sintered very well due to small initial particle size. By the addition of 40 vol% Al2O3 [60(WC=10wt%Co)-40Al2O3], it was possible to obtain a proper candidate as a superalloy.

• Current Photovoltaic Research
• /
• 제3권2호
• /
• pp.54-60
• /
• 2015

ZnSnO thin films were deposited by atomic layer deposition (ALD) process using diethyl zinc ($Zn(C_2H_5)_2$) and tetrakis (dimethylamino) tin ($Sn(C_2H_6N)_4$) as metal precursors and water vapor as a reactant. ALD process has several advantages over other deposition methods such as precise thickness control, good conformality, and good uniformity for large area. The composition of ZnSnO thin films was controlled by varying the ratio of ZnO and $SnO_2$ ALD cycles. The ALD ZnSnO film was an amorphous state. The band gap of ZnSnO thin films increased as the Sn content increased. The CIGS solar cell using ZnSnO buffer layer showed about 18% energy conversion efficiency. With such a high efficiency with the ALD ZnSnO buffer and no light soaking effect, AlD ZnSnO buffer mighty be a good candidate to replace Zn(S,O) buffer in CIGSsolar cells.

• 전자공학회논문지A
• /
• 제30A권5호
• /
• pp.30-35
• /
• 1993

We have investigated microwave dielectric properties of TiO$_{2}$ added (Pb$_{1-x}$Ca$_{x}$)ZrO$_{3}$ Ceramics with x=0.33, 0.35, and 0.37 sintered at 1400$^{\circ}C$ for 2 h. For additions of up to 3wt% of TiO$_{2}$ in (Pb$_{0.63}$ Ca$_{0.37}$)ZrO$_{3}$ (x=0.37), TiO$_{2}$ was completely soluble in (Pb, Ca)ZrO3 phase and did not affect the grain size of ceramics. Dielectric constant and temperature coefficient of resonant frequency increased due to the formation of solid solution, whereas Q value decreased linearly as TiO$_{2}$ increased up to 1 wt%. However, the dielectric loss was very high as TiO$_{2}$ exceeded 2 wt%. It was also shown that as Ca ion content in 0.5 wt% TiO$_{2}$ added (Pb$_{1-x}$,Ca$_{x}$)ZrO$_{3}$ decreased from x=0.37 to x=0.33, dielectric constant increased and Q value decreased.

• 한국세라믹학회지
• /
• 제42권10호
• /
• pp.698-702
• /
• 2005

Dielectric and Piezoelectric properties of complex perovskite 0.92Pb($Zr_{1/2}Ti_{1/2})O_{3}-(0.08-x)Pb(Cu_{1/3}Nb_{2/3})O_{3}-xPb(Mn_{1/3}Nb_{2/3})O_{3}(0{\leq}x{\leq}0.080$) (PZT-PCN-PMN) system were investigated as a function of PMN content. With the increase of PMN content of the sintered specimens, tetragonal phase was coexisted with rhombohedral phase, the dielectric constant was decreased, mechanical quality factor ($Q_{m}$) was inceased, and optimal sintering temperature was increased up to 1050$^{\circ}C$. For the composition of x = 0.064 sintered at 1050$^{\circ}C$ for 2 h, 1939 of maximum mechanical quality factor ($Q_{m}$), 57$\%$ of electromechanical coupling factor ($k_{p}$), and 1100$^{\circ}C$ of dielectric constant, 0.37$\% $ of dielectric loss (tan $\delta$) were obtained.

• 한국세라믹학회지
• /
• 제42권12호
• /
• pp.808-815
• /
• 2005

[ $Bi_xCe_{l-x}O_{2-x/2}$ ](BD C : Bismuth Doped Ceria) powders with x = 0.1, 0.2, and 0.3 were synthesized using the Glycine Nitrate Process (GNP). They were then calcined at $500^{\circ}C$ for 2 hand sintered in a pellet or rod form at 900, 1000 or $1100^{\circ}C$ for 4 h for characterization as the alternative electrolyte material for intermediate temperature solid oxide fuel cells. The BDC powder consisted of a single phase of $CeO_2-Bi_2O_3$ solid solution in the as-synthesized state as well as in the as-calcined state with a mean powder size of 4.5nm in the former state and 6.5 - 10.1nm in the latter. On the contrary, the second phase of $\alpha-Bi_2O_3$ was observed to have been formed in the sinter with its amount increasing roughly with increasing temperature or $Bi_2O_3$ content. The BOC powder was superior in sinterability to other alternative electrolyte materials such as GDC, ScSZ, and LSGM with the minimum sintering temperature for a relative density of $95\%$ or larger as low as $1100^{\circ}C$. The ionic conductivity of BOC increased with $Bi_2O_3$ content and the maximum value of 0.119 S/cm was obtained at $800^{\circ}C$ for $Bi_{0.3}Ce_{0.7}O_{1.85}$.

• 한국초지조사료학회지
• /
• 제39권1호
• /
• pp.39-44
• /
• 2019

Drought is one of the key limiting factors that adversely affects the growth and productivity of crop plants. For the enhancement of drought tolerance in crop plants, the identification of basic mechanisms of a plant to drought stress is necessary. In this study, we compared physiological and biochemical responses of five local Arundenilla hirta ecotypes to drought stress. These ecotypes were previously collected from various parts of Korean peninsula, including Youngduk, Gunsan, Jangsoo, Jinju-1 and Yecheon. A. hirta plants were exposed to drought stress for 14 and 17 days respectively, followed by re-watering for 3 days. The results showed that the lipid peroxidation (MDA), hydrogen peroxide ($H_2O_2$), DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity, and proline level were significantly increased while the chlorophyll content was decreased by drought stress in A. hirta leaves. The highest proline content and DPPH scavenging activity were shown in Ecotype of Youngduk with least MDA and $H_2O_2$ levels while the highest MDA and $H_2O_2$ contents, and least proline and DPPH levels were shown in Gunsan, respectvely. These results indicate that the Youngduk is the most tolerant and Gunsan is the most sensitive ecotype among the five different collections. Together, these results provide a new insight of overall physiological responses of A. hirta to drought stress.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권3호
• /
• pp.86-90
• /
• 2000

ZnO : Al films were prepared through the optimization process of aluminum content and substrate temperature in rf-magnetron sputtering. When hydrogenation was performed on these films using a hot filament method, all films showed improvement in conductivity although more conductive film showed less improvement. When the substrate temperature ($T_H$) was varied from $25^{\circ}C\;to\;300^{\circ}C$ during hydrogenation, the resistivity was reduced more at higher $T_H$ (more than 30% at $T_H=300^{\circ}C$) Thus, two methods were developed to suppress the dehydrogenation in ZnO : Al films : (1) capping with amorphous silicon thin film as a diffusion barrier, and (2) cooling during hydrogenation.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
• /
• pp.19-19
• /
• 2011

We studied the effect of Dy content on the magnetic properties of cobalt ferrite single crystal. The $CoFe_{1.9}Dy_{0.1}O_4$ single crystals were grown by the flux method by using $Na_2B_4O_{7.}10H_2O$ (Borax) as a solvent (flux). The black and shiny single crystals were obtained as a product. The X-ray diffraction test at room temperature confirmed the spinel cubic symmetry with lattice constant a = $8.42{\AA}$ of the single crystals. The presences of constitute elements (Co, Fe and Dy) was endorsedby EDAX analysis. The saturation magnetization (Ms) of $CoFe_{1.9}Dy_{0.1}O_4$ single crystals was measured and is found to be 72emu/g or equivalently $3.2{\mu}B$/f.u. at 300 K. The observed Ms and coercivity (Hc) is found to be lower than that of pure $CoFe_2O_4$.