• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.251-257
• /
• 2011

The processes for the preparation of ZnO powder by using EAF(electric arc furnace)dust was studied by wetting method which are divided to two steps, carried out of the elution processes by various concentrations of sulfuric acid is reacted with EAF dust as the former, and the latter were performed by a number of specified processes, which are leaching process depends on various pH, cementation, ozone and heat treatment processes etc. Experimental results showed that the appropriate pH range is pH7.5~8.0 and the resulting zinc content is range of 37~38%, the residual quantities of the heavy metals are less than 3ppm individually by cementation process except Mn, even though the Mn metal could not be removed by cementation process but was removed up to 0.2ppm by the ozone process from 70ppm initially. Finally, 80.2% of ZnO was obtained by the heat treatment at $500^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.341-345
• /
• 2001

In this study, nano-sized powders of SiO$_2$-0∼15mo1%B$_2$O$_3$ composition were prepared by sol-gel processing method using TEOS(Tetra ethyl ortho silicate) and H$_3$BO$_3$ solution. The powders were tape-cast on High silicate glass sheet(HSG) substrate and sintered to form a layer of undercladding for the planar light wave module. During the sol-gel processing, H$_2$O/Si mole ratio were varied to modify the size of the powders in a range from 600 to 75nm. The dispersion of the powder was modified by changing the pH of the slurry. Sintering temperature of the tape was observed to decrease with the size of the powder and the B$_2$O$_3$ content in the powder. When the silica powders of 75∼125nm in diameter containing 15mo1% B$_2$O$_3$ were used, 98 TD% was obtained at 1250$^{\circ}C$, which is approximately 300$^{\circ}C$ reduction in sintering temperature compared with micrometer-sized powders.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.441-448
• /
• 2014

Polyurethane/melamine phosphate composite foam (MP-PUF) was prepared from poly(adipate)diol/melamine phosphate composite (f=2), polyether-polyol (f=4.6), and PMDI (f=2.5). The thermal properties of MP-PUF such as morphology, closed-cell content, thermal conductivity, and thermal stabilities were characterized. Water was used as a blowing agent, and the composition of melamine phosphate (MP) was maintained at $1.43{\pm}0.3wt%$ of MP-PUF. As the content of water increased, the thermal conductivity of pure polyurethane foam (PUF) decreased, whereas the thermal conductivity of MP-PUF increased. The thermal stabilities of the PUF and the MP-PUF were maximized at 5 php $H_2O$, and then decreased at the higher $H_2O$ contents. The thermal stabilities of MP-PUF were greatly enhanced due to the synergetic effect of MP and urea, which was generated during the blowing process. The temperature of 50% residual mass of MP-PUF increased to $370{\sim}450^{\circ}C$ and the temperature of 30% residual mass exceeded over $700^{\circ}C$. Compared to the PUF, the temperature of 50% residual mass and 30% residual mass were higher than 25 and $70^{\circ}C$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.305-312
• /
• 1995

Thin films of Pb(Mg, Zn)1/3Nb2/3O3 were fabricated by spin coating the Pb-Mg-Zn-Nb-O complex alkoxide sols on(111) Pt-coated MgO (100) planes. It was observed that the content of H2O and the rheological characteristics of sol greatly influenced the orientation of perovskite grains after thin-film formation. A strong preferential orientation of (100)-type planes of the perovskite grains was obtained for the sol aged for 15 days with the molar ratio of H2O to total metal alkoxides=2. As small angle X-ray scattering experiment in the Porod region was performed to correlate the observed preferential orientation with the network structure of precursors at various stage of aging. It was shown that the degree of branching of the Pb-Mg-Zn-Nb-O precursor chain had a direct effect on the preferred oreintation, and weakly branched precursor systems led to highly oriented grains after thin-film formation.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.184-188
• /
• 2016

Highly ordered $SnO_2$ and NiO nanocolumns have been successfully achieved by glancing-angle deposition (GLAD) using an electron beam evaporator. Nanocolumnar $SnO_2$ and NiO sensors exhibited high performance owing to the porous nanostructural effect with the formation of a double Schottky junction and high surface-to-volume ratios. When all gas sensors were exposed to various gases such as $C_2H_5OH$, $C_6H_6$, and $CH_3COCH_3$, the response of the highly ordered $SnO_2$ nanocolumn were over 50 times higher than that of the $SnO_2$ thin film. This work will bring broad interest and create a strong impact in many different fields owing to its particularly simple and reliable fabrication process.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.565-574
• /
• 1993

The Ar/Ar- $H_{2}$ plasma method Lvas applied to reduce and refine high purity Nb metal. Inaddition, the reaction between molten Nb metal and hydrogen were also analyzed in the Ar-(20%)$H_{2}$plasma. The metallic Nb of 99.5wt% was obtained at the ratio of $C/Nb_{2}O_{5}$=5.00 in the Ar plasma reductionand the $O_2$ loss from the thermal decomposition of niobium oxides did not take place. In the Ar-(20%)Hi plasma the metallic Nb of 99.8wt% was produced at the ratio of $C/Nb_{2}O_{5}$=4.80. It was observedthat a major reaction of the deoxidation was the reaction with H, Hi, and a deoxidation by the evaporationof $NbO_x$ did not occur but a mass loss of Nb did by a "splash" effect. The deoxidation reaction rateobeyed the 1st order reaction kinetics and the reaction rate constant(k') of deoxidation was $7.8 \times 10_{-7}$(m/sec).The solubility of hydrogen in Nb metal was 60ppm and it was larger than the solubility of molecularstate hydrogen by 40ppm in the Ar-(20%)$H_{2}$ plasma method. A saturation was within 60sec anda hydrogen content was reduced below lOppm by a Ar plasma re-treatment.by a Ar plasma re-treatment.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1303-1305
• /
• 1998

In order to reduce or avoid oxidation problem at operation the interconnects in SOFCs have so far mostly been made of ceramic material. It has high chemical stability both under cathode and anode condition, relatively thermal expansion coefficient that matchs that of electrolyte material YSZ. But this material shown rather weak in the low oxygen atmosphere and thermal shock, and it has lower mechanical strength than alloys. To avoid these problems one may consider to use metals or alloys as materials for interconnects. Metallic interconnects are advantageous because of their high thermal and electronic conductivities. But it has some problems, Those are high thermal expansion and oxidation at high temperature in air. To solve these problems in the interconnection material in this study, $LaCrO_3$-dispersed Cr alloys for metallic interconnector of SOFC have been investigated as a fuction of $LaCrO_3$ content in the range of 5 to 25 vol.%. The Cr alloy were prepared by mixing Cr and $LaCrO_3$ powders in high-energy ball mill for 48h and by sintering under Ar atmosphere with 5vol.% $H_2$ for 10h at $1500^{\circ}C$. The alloys had a relative density of 95% and above. The Cr alloys in composed of two kind of small $LaCrO_3$ and large Cr particles. As the $LaCrO_3$ content increased, the Cr particle size decreased but the $LaCrO_3$ particle size remained contant. Also the oxidation tests show that the $LaCrO_3$-dispersed Cr is very resistant to oxidation in air. These results means that $LaCrO_3$-dispersed Cr is a useful material for metallic interconnect of planar SOFC.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.1
• /
• pp.49-57
• /
• 1993

The main experiment related to this report was undertaken to assess the effects of two rates of $Ca(OH)_2$ (0, 250 kg/10a only at establishment) and five rates of N-$P_{2}O_{5}$-$K_2O$ (0-0-0, 0-10-10, 6-15-15, 12-20-20, 24-25-20 kg/10a/year) on the pasture establishment, on forage yield and quality, vegetation etc. After this 10-year main experiment, this pasture had been used to assess the effects of the above treatments on the soil characteristics in oversown hilly pasture of a grass-clover sward. This 1st part is concerned with the soil properties of pH-value. OM, T-N, avail. $P_{2}O_{5}$ and $P_{2}O_{5}$ absorption coefficient, and lime requirement by the soil depth. 1. The pH of the topsoil(0~l5 cm) was lowered from pH 5.12 of before the experiment to 4.90 of when $Ca(OH)_2$ was applied and to 4.68 of when $Ca(OH)_2$ was not applied. The pH decrease was more evident with the increase of NPK application rate and in the upper part of the top soil(0.0~7.5 cm). The additional application of lime was necessary in all the experiment blocks due to the strong acidity of the soil, and the amounts of lime requirement were increased with increased application rates of NPK and soil depth. 2. The contents of organic matter and T-N were increased in all the blocks by the establishment of the hilly pasture, and were higher in $Ca(OH)_2$ applied blocks than non-applied blocks. The contents were inversely correlated with the soil depth. No correlation was observed between the contents and the application rates of NPK. 3. The content of available $P_{2}O_{5}$-$K_2O$, was increased with the increased application of P, especially in the upper part of top soil. The content in the upper part(0.0~7.5 cm) was about twice of that in the lower part(7.5~15.0 cm). Since the contents of available $P_{2}O_{5}$$P_{2}O_{5}$/10a/year were applied, respectively), it is necessary to decrease the application rate of $P_{2}O_{5}$, gradually. The $P_{2}O_{5}$ absorption coefficient in topsoil (0.0~15.0 cm) was more or less higher when no lime and less $P_{2}O_{5}$, was applied. No correlation was observed in subsoil. 4. Further studies on the methods, rates, time of additional application of lime, and on the methods of decreased apllication of $P_{2}O_{5}$ should be performed for better management of oversown hilly pasture.

• Korean Journal of Materials Research
• /
• v.23 no.12
• /
• pp.722-726
• /
• 2013

Freeze drying of a porous Cu-Sn alloy with unidirectionally aligned pore channels was accomplished by using a composite powder of CuO-$SnO_2$ and camphene. Camphene slurries with CuO-$SnO_2$ content of 3, 5 and 10 vol% were prepared by mixing with a small amount of dispersant at $50^{\circ}C$. Freezing of a slurry was done at $-25^{\circ}C$ while the growth direction of the camphene was unidirectionally controlled. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green bodies were hydrogen-reduced at $650^{\circ}C$ and then were sintered at $650^{\circ}C$ and $750^{\circ}C$ for 1 h. XRD analysis revealed that the CuO-$SnO_2$ powder was completely converted to Cu-Sn alloy without any reaction phases. The sintered samples showed large pores with an average size of above $100{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal walls of the large pores had relatively small pores. The size of the large pores decreased with increasing CuO-$SnO_2$ content due to the change of the degree of powder rearrangement in the slurry. The size of the small pores decreased with increase of the sintering temperature from $650^{\circ}C$ to $750^{\circ}C$, while that of the large pores was unchanged. These results suggest that a porous alloy body with aligned large pores can be fabricated by a freeze-drying and hydrogen reduction process using oxide powders.

• Journal of the Korean Society of Tobacco Science
• /
• v.13 no.2
• /
• pp.71-79
• /
• 1991

The experiment was conducted to investigate accumulation o( phosphate in tobacco production area. The results are as follows: 1) The content of available P in burley production area was about 200ppm higher than that in flue-cured tobacco production area, the available P content of 20% tobacco fields surveyed was above 1000ppm P. 2) Tobacco fields having 200ppm of available P which were grouped as medium category for phosphate recommendation were more than 90% out of tobacco fields surveyed. 3) Total phosphate content was above 4000ppm in 42.5% burley tobacco fields before transplanting, and 2000~3000ppm in about 40% flue-cured tobacco fields. 4) Phosphate fractions in soil increased in order of Al-P > Fe-P > Ca-p, and their content was about 50% of total phosphate in tobacco fields surveyed. 5) pH value in most of tobacco fields surveyed ranged from 4.5 to 5.0 and, field soils with pH value below 5.5 were 64 %.