• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.228-228
• /
• 2017

Rice production and quality could be changed by temperature condition. Extremely high temperature event have been occurred more frequently for global warming. To increase rice quality against to global warming, breeding of heat tolerance rice cultivar is needed. Ilmi which is the one of Korean leading rice cultivar shows heat stress resistant character during ripening stage. Yield and quality (brown and milled rice) of Ilmi did not show significant different under high temperature condition compared to control condition. However, the main physiological characters for heat resistance of Ilmi have been not investigated yet. Therefore we try to investigate the heat tolerance characters of Ilmi. Two rice cultivars, Ilmi and Ilpum-which is heat susceptible rice cultivar, were cultivated under natural condition in wagnor pot until heading was appeared. After checking heading date, each material was cultivated under different temperature condition, heat($32/22^{\circ}C$) and control($26/16^{\circ}C$) condition. Anti-oxidant enzyme activity was checked during ripening stage in each material. Catalase and ascorbic peroxidase activity of leaf under heat stress condition were higher in Ilmi than Ilpum especially early ripening stage. Analyzing of stress resistance using $H_2O_2$, the flag leaf of Ilmi showed more green color than Ilpum with higher chlorophyll content than those of Ilpum. We also checked the amount of $H_2O_2$ content in young leaf of each material by treating high temperature. $H_2O_2$ content in each material was increased according to treatment time. However $H_2O_2$ content of young leaf in Ilmi was less than those in Ilpum. Also catalase and ascorbic peroxidase activity in leaf increased much faster in Ilmi than Ilpum. With those data, we confirmed that heat stress resistance of Ilmi is due to the higher anti-oxidant activity against to stress condition. We will investigate the heat tolerance characters of Ilmi more in further study to enhance the breeding effect of heat stress tolerance rice.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1154-1161
• /
• 2006

Air drying equipment was built as a device for reduction of dewatered cake from wastewater and waterworks sludge and to reproduce it by reusable matter. Dewatered cake was supplied into the air drying equipment which operated by air velocity of 80 m/sec, air rate 30 $m^3/min$ and air temperature of $40^{\circ}C$, and dried to produce the dried powder. The air drying equipment was composed of the air ejector which made high-speed fluid field, and cyclone which made circling fluid field. Dewatered cake was crushed at the high-speed zone as first step, and formed into dried powder of sphere shape by the collision between particles at the circling fluid zone.. Wastewater sludge with water content of 82.5 wt% was supplied 1.0 kg/min into air drying equipment and produced the dried powder which had the water content of 62.3 wt% and mass median diameter of 2.4 mm after process. At that time, it was analyzed that water removal rate was 0.1 $H_2O{\Delta}kg/min{\cdot}DS$ kg and air consumption was 170 $m^3/DS$ kg. Under same experimental conditions, when waterworks sludge was dried, water content of dried powder decrease to 47.5 wt% and mass median diameter decrease 2.1 mm and water removal rate increase 0.13 $H_2O{\Delta}kg/min{\cdot}DS$ kg. Air consumption increase 180 $m^3/DS$ kg with comparison to the results of wastewater sludge. Therefore, this technology was evaluated that drying the dewatered cake of waterworks sludge was more efficient than wastewater sludge, and also economical sludge handling technology due to drying the cake by only air.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.4
• /
• pp.189-195
• /
• 2006

The microstructure, electrical and dielectric properties, and stability against DC accelerated aging stress of the varistors, which are composed of quaternary system $ZnO-Pr_6O_{11}CoO-Cr_2O_3-based$ ceramics, were investigated for different $La_2O_3$ contents. The increase of $La_2O_3$ content led to more densified ceramics, whereas abruptly decreased the nonlinear properties by incorporating beyond 1.0mol%. The highest nonlinearity was obtained from 0.5mol% $La_2O_3$, with the nonlinear coefficient of 81.6 and the leakage current of $0.1{\mu}A$. The varistors doped with 0.5mol% $La_2O_3$ exhibited high stability, in which the variation rates of breakdown voltage, nonlinear coefficient, leakage current, dielectric constant, and dissipation factor were -1.1%, -3.7%, +100%, +1.4%, and +8.2%, respectively, for stressing state of $0.95V_{1mA}/150^{\circ}C/24h$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.2
• /
• pp.65-70
• /
• 1977

The effects of regional climatic factors on wheat quality were discussed. The most important climatic factor on wheat quality during the ripening period of wheat was air temperature during the ripening period of wheat. The protein content and sedimentation value were higher in northern parts of Korea compared to southern parts in Korea. The varietal effects of ripening temperature on protein content and sedimentation value of wheat were varied in nine tested varieties.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.183-190
• /
• 1995

The effects of enzymatic pretreatments on the bleaching of kraft pulp were studied. The kappa number of pulp samples which represents the lignin content of pulp decreased by 25.2% by the pretreatments with xylanase(EC 3.2.1.8, Pulpzyme HB) while it decreased by 13.7% without enzyme pretreatments after the extraction of the pretreated pulp samples in 1N NaOH. To enhance the effects of enzymatic pretreatment on the bleaching of kraft pulp, phenols were used as radical carriers with the simultaneous use of peroxidase(EC 1.11.1.7, Novozyme 502), $H_2O_2$, and xylanase. Guaiacol (1mM) was most effective by decreasing the kappa number by 29.6% when a low initial concentration of $H_2O_2$ (0.1mM) was used. The use of either a higher initial concentration of $H_2O_2$ or phenols lacking electron donating substituents such as phenol and p-chloyophenol, however, decreased the efficiency of enzymatic pretreatment indicating that the production rate and the stability of phenolic radicals are important parameters.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.355-364
• /
• 2008

Emerald deposit located on Itabira, Brazil is one of the major one in the world. We applied three different analytical approaches on Itabira emerald samples, (1) perpendicular to the c-axis, (2) parallel to the c-axis, (3) emerald pallet mixed with KBr, using Fourier Transform Infrared (FTIR) spectroscopy, to understand and compare spectroscopic characteristics of three Itabira emerald samples. Occurrence of $5,271\;cm^{-l}$ and $1,638\;cm^{-l}$ absorption peaks within $H_2O$-related range indicates that the samples belong to Type-II emerald. These emerald samples also display strong absorption peak generated from Type-IIa emerald preserving $H_2O-Na-H_2O$ sequence. $CO_2$- and Cl-related absorption peaks observed within specific range except for $H_2O$-related range. These observations and results suggest that FTIR analysis can be used for not on1y classification of emerald types, but also prediction of $Na_2O$ content within the emerald through comparison of relative peak intensity.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.115-122
• /
• 2015

$SiO_2{\cdot}B_2O_3$ was prepared by trimethylborate (TMB)/tetraethylorthosilicate (TEOS) mole ratio 0.01 at $800^{\circ}C$. PDMS[poly(dimethysiloxane)]-$SiO_2{\cdot}B_2O_3$ composite membranes were prepared by adding porous $SiO_2{\cdot}B_2O_3$ to PDMS. To investigate the characteristics of PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane, we observed PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane using TG-DTA, FT-IR, BET, X-ray, and SEM. PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane was studied on the permeabilities of $H_2$ and $N_2$ and the selectivity ($H_2/N_2$). Following the results of TG-DTA, BET, X-ray, FT-IR, $SiO_2{\cdot}B_2O_3$ was the amorphous porous $SiO_2{\cdot}B_2O_3$ with $247.6868m^2/g$ surface area and $37.7821{\AA}$ the mean of pore diameter. According to the TGA measurements, the thermal stability of PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane was enhanced by inserting $SiO_2{\cdot}B_2O_3$. SEM observation showed that the size of dispersed $SiO_2{\cdot}B_2O_3$ in the PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane was about $1{\mu}m$. The increasing of $SiO_2{\cdot}B_2O_3$ content in PDMS leaded the following results in the gas permeation experiment: the permeability of both $H_2$ and $N_2$ was increased, and the permeability of $H_2$ was higher than $N_2$, but the selectivity($H_2/N_2$) was decreased.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.259-265
• /
• 2005

Characteristics of electroplated Ni films and $Ni-Al_2O_3$ composite films, such as yield strength, fracture elongation, and $Al_2O_3$ content, were evaluated as a function of electroplating current density. $Al_2O_3$ content was $11.48\~11.64\;vol\%$ for $Ni-Al_2O_3$ composite films electroplated at $5\~20\;mA/cm^2$, and decreased to $8.41\;vol\%$ at $30\;mA/cm^2$ $Ni-Al_2O_3$ possessed yield strengths higher than those of Ni films. Especially, $Ni-Al_2O_3$ fabricated at $5\;mA/cm^2$ exhibited $50\%$ improved yield strength. Fracture elongations of Ni and $Ni-Al_2O_3$ decreased with increasing the electroplating current density. $Ni-Al_2O_3$ electroplated at $5\;mA/cm^2$ exhibited more uniform dispersion of $Al_2O_3$ and higher yield strength and larger fracture elongation than the composite films processed at other current densities.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.273-278
• /
• 1983

With the synthetic standards, valuable metals $(Ta_2O_5, Nb_2O_5, TiO_2, SnO_2$, and $ZrO_2$) in the tin slags have been determined by the x-ray fluorescence spectrometry. The powder sample and the standards are homogeneously mixed with anhydrous $Li_2B_4O_7$ and La_2O_3$ in weight ratio of 15 : 42 : 3 respectively. The mixed material is fused at $1,150^{\circ}C$ for 30 minutes to be changed into the glass bead. The bead is ground to (-) 325 mesh size and pelletized. The analytical results obtained in this work are consistent with the data obtained by other common methods within allowable error range. The standard deviation for $Ta_2O_5$ in PTS-H sample is 0.12 % at level of 3.40 % content.

• Korean Journal of Materials Research
• /
• v.14 no.11
• /
• pp.764-768
• /
• 2004

Perovskite Pb(Mn_{1/3}Sbu_{2/3})O_2-Pb(Zr,Ti)O_3\;(PMS-PZT) was prepared and ZnO doping effects on its piezoelectric properties were investigated. Pyrochlore phase was not identified in the PMS-PZT ceramics with $0\sim5\;mol\%$ ZnO sintered at $1100^{\circ}C$ for 2 hrs, and maximum sintered density of $7.92 g/cm^3$ was obtained. Piezoelectric charge constant and voltage constant increased to $359{\times}10^{-12}\;C/N\;and\;22.5{\times}10^{-13}\;Vm/N$, respectively, with increasing ZnO content. Mechanical quality factor reduced considerably with increasing ZnO content. When the ZnO content was 3 $mol\%$, electromechanical coupling factor and relative dielectric constant showed maximum values of $56\%$ and 1727, respectively. This should be evaluated by complicated variations of sintered density, tetragonality of lattice, grain size, and A-site vacancy generated by ZnO addition and $Zn^{2+}$ substitution.