• Microbiology and Biotechnology Letters
• /
• v.27 no.2
• /
• pp.145-152
• /
• 1999

Brettanomyces custersii CBS 5512 which has reported as a thermotolerant glucose-cellobiose co-fermentable yeast strain was mutated with UV and NTG to improve ethanol yield at higher than 4$0^{\circ}C$ B. custersii H1-23, H1-39, H1-55 and H1062 were finally selected for hyper-fermentable strains at higher than 4$0^{\circ}C$ from thermotolerant 7510 colonies through 5th selection. Among the selected strains, H1-39 mutant had better fermentability at 4$0^{\circ}C$ and 43$^{\circ}C$ from different concentrations of glucose. H1-39 and H1-23 mutants yielded more than 70% of the theoretical ethanol yield in 4 and 8% mixed sugars at above 4$0^{\circ}C$, which was 5-11% higher than those by original strain. Especially, H1-39 mutant had better fermentability in 4% mixed sugar. It showed 78.5% of the theoretical yield at 4$0^{\circ}C$ and 72.2% of the theoretical yield at 43$^{\circ}C$. On the other hand, theoretical yield of ethanol by H1-39 mutant in 8% mixed sugar at 4$0^{\circ}C$ and 43$^{\circ}C$ were 75.2% and 70.2%, respectively. Theses values increased up to 7-11% as compared to those by orginal strain. By the simultaneous saccharification and fermentation, ethanol production by H1-39 mutant increased up to more than 23% as compared to that by original strain.

• Journal of Hydrogen and New Energy
• /
• v.24 no.2
• /
• pp.99-106
• /
• 2013

The variations of performance and metabolites at an early stage were investigated for the successful start-up technology in continuous fermentative hydrogen production. Unsuccessful start-up was observed when the operation mode was changed from batch to continuous mode after the yield was reached to 0.5 mol $H_2$/mol $hexose_{added}$ by batch mode. $H_2$ production continued till 12 hours accompanied by butyrate production, but did not last with propionate production increase. It was suspected that the failure was due to the regrowth of propionic acid bacteria during batch mode which were inhibited by heat-shock but not completely killed. Thus, successful start-up was tried by early switchover from batch to continuous operation; continuous operation was started after the $H_2$ yield was reached to 0.2 mol $H_2$/mol $hexose_{added}$ by batch mode. Although $H_2$ production rate decreased at an early stage, stable $H_2$ yield of 0.8 mol $H_2$/mol $hexose_{added}$ was achieved after 10 days by lowering down propionate production. And it was also concluded that the reason for $H_2$ production decrease at an early stage was due to alcohol production by self detoxification mechanism against VFAs accumulation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.310-316
• /
• 1987

A field experiment was conducted to find out the effects of liming(soil pH) and sources of N on growing characters and yield of burley tobacco. Treatments consisted of liming(nonliming, liming to soil pH5.5 and 6.5) as the main plot and N sources(compound fertilizer of containing 3.9% NH$_4$-N and 6.1% NH$_2$-N, NaNO$_3$,(NH$_2$)$_2$CO and (NH$_4$)$_2$SO$_4$as the sub-plot. The growth of vegetative growing stage of limed plots were delayed(to compare the nonlimed plot) by influence of alkali. When the source on N was NaNO$_3$ the growth of vegetative growing stage was unfavorable and the yellowing of lower leaves of maturing stage was rapid. The yield and value of cured leaf was increased by increasing the rate of Ca(OH)$_2$, but there was no significant differences among the source of N. The yield response to liming was greater when the source of N was (NH$_4$)$_2$SO$_4$ than that of any other plots.

• Microbiology and Biotechnology Letters
• /
• v.17 no.3
• /
• pp.173-177
• /
• 1989

Cell density was gradually decreased as the dilution rate was increased under chemostat cultivation of HeLa cells. Maxium cell density was maintained at the dilution rate of 0.020 (1/h) which was far less than the wash-out rate of 0.050 (1/h), Maxium cell productivity of 2 (mL of cells/L/h)was obtained at the dilution rate of 0.030 (1/h) by showing the culture also required maintenance period at low dilution rates, whose result meant the deviation of continuous culture theroy. Methods of indirectly measuring cell density have been introduced to represent mammalian cell growth, which are packed cell volume and oxygen uptake rate, and these values showed good linear relationship with actual cell density by having correlation factor of 0.90. Theoretical maximum oxygen yield, $Y_{O2}^{max}$ and maintenance oxygen consumption rate, m$_{O2}$, were estimated as 4.1$\times$10$^5$ (cells/mmole $O_2$) and 10.71$\times$10$^{-9}$ (mmole $O_2$/cells/h) by employing oxygen yield model.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.2
• /
• pp.93-104
• /
• 1996

A field experiment was conducted in Chungju and Jungwon to evaluate growth characteristics, dry matter yield, protein yield and palatability of intercropping comparing with monocropping forage crops by the use of sorghum $\times$ sudangrass hybrid(S.S.H.), five forage soybeans and two forage cowpeas of superior to selected experiment of varieties. All eight treatment plots were replicated three times and cutting date were cut July 6 and September 9. 1. The mean leaf number of S.S.H. in intercropping T2 treatment showed high compared to T1 treatment in all treatment except for Hwangkeum treatment, but T3 treatment was lower than the other treatments. In the leaf number of soybean, Jangbaek treatment was the highest as 47 leaves per plant, cowpea treatments showed high above 50 leaves. The stem diameter of S.S.H. in Jangyeob treatment of T2 treatment was 9.6mm. In legume, cowpea of T3 treatment was high as ranged from 7.9mm to 8.2mm. In stem hardiness of S.S.H., TI treatment was the lower than the other treatments, while Jangbaek treatment of T2 treatment was the highest as $2.0kg/cm^2$. In legume crops, Jangbaek and Baekun treatment were the highest as $1.6kg/cm^2$, but T3 treatment was very low as $0.3~0.6kg/cm^2$. 2. In the mean leaf ratio of S.S.H., T1 treatment was higher than T2 and T3 treatment as 34.9%. In the legume crops, Togyu treatment was the highest as 40.9%. In the mean tiller number of S.S.H., T2 treatment showed high compared to TI treatment, but T3 treatment of was rather decrease than The tiller number of S.S.H. in Jangyeob treatment of T2 treatment was the highest as 4.6 per plant. The dead stubble of S.S.H. was high in order to T3>T1>T2 treatment>, T3 treatment was highly about 2 times compared to T2 treatment. 3. S.S.H. as T3 treatment was resistant to lodging, but T3 and T1 treatment showed highly lodging. In the legums, T3 treatment was resistant to lodging, but T2 treatment showed highly lodging. In the S.S.H. of T2 treatment, the leaf of summer depression was not occurrence, but T3 treatment was higher than the other treatments. 4. The palatability of domestic animals was high in order of T2>Tl>T3, especially Togyu treatment of T2 treatment was the highest at the holstein and deer, and Jangyeob treatment of T2 treatment was the highest in the Korean native cattle. But T3 treatment was lower than other treatments in the holstein and Korean native cattle. 5. Fresh yield of monocropping(T1) was the highest as 94, 650kg/ha, while dry matter yield in Jangyeob treatment of T2 treatment was the highest as 15, 575/ha But fresh yield and dry matter yield of T3 treatment were the lowest(P<0.05). 6. Protein yield in T2 treatment was high, especially Jangyeob treatment of T2 treatment was the highest as 1, 605.5 kg/ha T3 treatment was low in spite of high protein content, because dry matter yield was lower than the other treatments. In conclusion, among T1, T2 and T3 treatment, Jangyeob, Togyu and Baekun treatments of T2 treatment showed optimum varieties for intercropping with S.S.H., because they showed high Dry matter yield, protein yield and palatability.

• Korea-Australia Rheology Journal
• /
• v.15 no.1
• /
• pp.9-17
• /
• 2003

The rheological behaviour of anatase $TiO_2$ with organic coating has been investigated extensively in this study. The yield stress was measured over a wide range of solids concentration and pH using stress-controlled and speed-controlled rheometers. The organic treatment leads to a shift of the isoelectric point (IEP) from around pH 5.5 to pH 2.4. A maximum yield stress occurs in the vicinity of the isoelectric point determined by electrokinetic measurements. The transition of rheological behaviour between elastic solid and viscous liquid is represented by a stress plateau in a plot of stress against strain. It is hypothesised that the slope of the stress plateau reflects the uniformity of the structure, and hence the distribution of bond strength. Altering the concentration and the surface chemistry can vary the bond strength and its distribution. therefore, resulting in different type of failure: "ductile-type" or "brittle-type". pH and volume fraction dependence of yield stress could be described quantitatively using existing models with reasonable agreement.easonable agreement.

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.3
• /
• pp.418-420
• /
• 1989

• Journal of Animal Environmental Science
• /
• v.13 no.1
• /
• pp.21-28
• /
• 2007

This experiment was conducted to determine the effect of feed intake and water consumption on milk yield and manure production in milking cows. The average feed intake(dry matter) of milking cows were 19.5kg/hd/d. Spring(23.9kg) and fall(22.1kg) feed intake rates when higher than in the summer(17.0kg) and winter(15.3kg/hd/d). The average water consumption of milking cows were $77.2\ell/hd/d$. Summer showed the highest value$(85.5\ell/hd/d)$ and winter showed the lowest value$(62.2\ell/hd/d)$. The average milk yield during spring, summer, fall, and winter was 30.8, 24.0, 25.4, and 23.7kg/hd/d, respectively. Milk yield during spring was found to be statiscally greater than for the other seasons. Manure production of milking cows during spring, summer, fall, and winter was 64.4, 63.5, 60.4, and 51.0kg/hd/d, respectively. Consequently, a relatively high correlation between milk yield and water consumption$(R^2=0.7742)$, milk yield and feed intake$(R^2=0.7459)$, water, consumption and urine production$(R^2=0.7422)$, feed intake and feces production$(R^2=0.6044)$, and milk yield and feces production$(R^2=0.6920)$ were observed in milking cows. The other hand, correlation between water consumption and feces production$(R^2=0.2950)$, feed intake and urine production $(R^2=0.1985)$, and milk yield and urine production$(R^2=0.2335)$ were found to be relatively low. Therefore, correlation equation between milk yield and feed intake, milk yield and water consumption can be estimated from : $Y=0.1919X_1+11.181(R^2=0.7742),\;Y=0.8568X_2+9.3067(R^2=0.7459)$(Y=milk yield $X_1=water$ consumption, $X_2=feed$ intake).

• Preventive Nutrition and Food Science
• /
• v.21 no.2
• /
• pp.138-146
• /
• 2016

In this study, we report the optimal extraction conditions for obtaining organosulfur compounds, such as cycloalliin, from garlic by using principal component analysis (PCA). Extraction variables including temperature ($40{\sim}80^{\circ}C$), time (0.5~12 h), and pH (4~12) were investigated for the highest cycloalliin yields. The cycloalliin yield (5.5 mmol/mL) at pH 10 was enhanced by ~40% relative to those (~3.9 mmol/mL) at pH 4 and pH 6. The cycloalliin level at $80^{\circ}C$ showed the highest yield among the tested temperatures (5.05 mmol/mL). Prolonged extraction times also increased cycloalliin yield; the yield after 12 h was enhanced ~2-fold (4 mmol/mL) compared to the control. Isoalliin and cycloalliin levels were inversely correlated, whereas a direct correlation between polyphenol and cycloalliin levels was observed. In storage for 30 days, garlic stored at $60^{\circ}C$ (11 mmol/mL) showed higher levels of cycloalliin and polyphenols than those at $40^{\circ}C$, with the maximum cycloalliin level (13 mmol/mL) on day 15. Based on the PCA analysis, the isoalliin level depended on the extraction time, while cycloalliin amounts were influenced not only by extraction time, but also by pH and temperature. Taken together, extraction of garlic at $80^{\circ}C$, with an incubation time of 12 h, at pH 10 afforded the maximum yield of cycloalliin.

• YAKHAK HOEJI
• /
• v.31 no.4
• /
• pp.219-223
• /
• 1987

2-Cyclohexylimino-3-cyclohexyl-5-methyl-4-oxo-2H, 5H-1, 3-oxazino [5,6-C]-1, 2-benzothiazine-6,6-dioxide 2 was hydrolized in d-HCl/$CH_3$CN to give 5-methyl-3-cyclohexyl-2H, 5H-1, 3-oxazino [5, 6-C]-1, 2-benzothiazine-2, 4(3H)-dione 6, 6-dioxide 3 in 82% yield. The alkaline hydrolysis of 3 afforded to 4-hydroxy-2-methyl-N-(cyclohexyl)-2H-1, 2-benzothiazine-3-carboxamide-1, 1-dioxide 4 in 88% yield. On the other hand 3 was synthesized from 4 and ethylchloroformate on the reversed procedure.