• 분석과학
• /
• 제5권2호
• /
• pp.177-184
• /
• 1992

pH-ISFET와 glucose oxidase막으로 구성되어 있는 포도당센서를 제조하고, 그 감응특성을 조사하였다. pH-ISFET 포도당센서는 pH-ISFET의 gate 위에 glutaraldehyde로서 bovine serum albumin과 glucose oxidase를 고정화시켜서 제작하였다. pH-ISFET 포도당센서의 감응에 미치는 완충용액의 pH 및 농도와 효소의 양의 영향에 대하여 조사였다. 합성생리염수(pH 7.4)로 만든 포도당용액에 대한 감응특성은 다음과 같다. 곧, 직선감응농도 범위, 감응기울기(감도) 및 감응시간은 각각 $1.0{\times}10^{-4}{\sim}6.0{\times}10^{-3}M$, 4.1 mV/decade 및 12~15분이다.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.95-100
• /
• 2011

The test was done on cars travelling at speeds of 20km/h, 60km/h and 100km/h, the performance testing mode for chassis dynamometer. In this test, the secondary waveform were measured, including those using faulty MAP sensors, oxygen sensors and spark plugs. The results from these measurements and their analysis of secondary waveform can be summarized as follows: 1) The secondary waveform measured from the faulty oxygen sensor showed a lot of noise around peak voltage and in the rising and falling sections during spark line which means that the air fuel mixture was non-homogeneous. 2) The secondary waveform from the faulty MAP sensor showed the worst shape compared to other sensors, including variation of spark line, state of air-fuel mixture and velocity of flame front. 3) The spark line time of secondary waveform using a faulty spark plug displayed the shortest and smallest energy spark line, which means that a misfire occurred.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.151-156
• /
• 2013

The experiment was done on cars travelling at the speeds of 20km/h, 60km/h and 100km/h using the performance testing mode for chassis dynamometer. In this experiment, the relativity between the secondary waveform coming from ignition coil and exhaust emissions were measured in case of cars with failures, in oxygen sensor, spark plugs. The following results obtained by analysis of the relativity between the secondary waveform and exhaust emissions. 1) When the oxygen sensor is failure, the average value of CO emission measured was 6.8 times higher than the standard CO emission value and the average value of HC emission measured was 2.3 times higher than the standard emission level. 2) When engine parts are in failure, more fuel enters the cylinder due to longer opening duration of injector, and it tended to make CO and HC emission values increase. 3) Combustion duration, the shape of flame propagation during spark line, and the size of the discharge-induced energy were the three main elements that directly cause variations in CO and HC emission values.

• 한국전기전자재료학회논문지
• /
• 제24권4호
• /
• pp.290-296
• /
• 2011

Carbon nanotubes (CNTs) have excellent electrical, chemical stability, mechanical and thermal properties. In this paper, networks of Multi-walled carbon nanotube (MWCNT) materials were investigated as a resistive gas sensors for the $H_2$ gas detection. Sensor films were fabricated by the air spray method using the multi-walled CNTs dispersion solution on the glass substrates cured with plasma and nitrocellulose. Sensors were characterized by the resistance measurements in the self-fabricated oven in order to find the optimum detection properties for the hydrogen gas molecular. The sensitivity and the linearity of the MWVNT sensors using the glass substrate cured with plasma for the $H_2$ gas concentration of 0.06~0.6 ppm are 0.013~0.097%/sec and 0.131~0.959%FS, respectively. The MWCNT film was excellent in the response for the hydrogen gas moleculars and its reaction speed was very fast, which could be using as hydrogen gas sensor. The resistance of the fabricated sensors decreases when the sensors are exposed to $H_2$ gas.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.52-58
• /
• 2004

Magneto-Impedance(MI) sensor is a highly sensitive sensor, which was able to detect a weak geomagnetic field. It also has a merit to be able to build in the low power system. In this study, their magnetic permeability and anisotropy field(H$\sub$k/) as a function of some different thickness of sputtered amorphous CoZrNb films with zero-magnetostriction and soft magnetic property are investigated. In order to make a uniaxial anisotropy, film was subjected to the post annealing in a static magnetic field with 1KOe intensity at 250, 300, and 320$^{\circ}C$ respectively for 2 hours. Magnetic properties of films are measured by using a M-H loop tracer. Magnetic permeability of a film is measured over the frequency range from 1 ㎒ to 750㎒. By thickening a CoZrNb film relatively, magnetic permeability and impedance are examine to design the. MI sensor which drives at 50㎒, and thereof fabricated the MI sensor which drives at the 50㎒.

• 대한화학회지
• /
• 제36권6호
• /
• pp.864-871
• /
• 1992

pH-ISFET와 urease막으로 이루어져 있는 요소센서를 제조하고, 그 감응특성을 조사하였다. pH-ISFET 요소센서는 pH-ISFET의 게이트 위에 glutaraldehyde로 BSA와 urease를 고정화시켜서 제작하였다. pH-ISFET 요소센서의 감응에 미치는 완충용액의 pH 및 농도와 효소의 양의 영향에 대하여 조사하였다. 합성생리염수(pH 7.4)로 만든 요소용액에 대한 감응 특성은 다음과 같다. 곧 직선감응농도범위, 감응기울기(감도) 및 감응시간은 각각 5.0 ${\times}$ $10^{-4}$ ${\sim}$ 5.0 ${\times}$ $10^{-2}$M, 31.6 mV/decade 및 4${\sim}$10분이다.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.899-902
• /
• 2006

The complexation of N,N'-4,5-(ethylenedioxy)benzenebis(salicylideneimine), (salphen$H_2$) with uranyl ion was studied in acetonitrile solution spectrophtometrically, and the formation constant of the resulting 1 : 1 complex was evaluated. The salphen$H_2$ ligand was used as an ionophore in plasticized poly(vinyl chloride) (PVC) matrix membrane sensor for uranyl ion. The prepared sensors exhibited a near Nernstian response, 28.0-30.9 mV/decade for uranyl ion over the concentration range $1.0\;{\times}\;10^{-2}$ to $1.0\;{\times}\;10^{-6}$M with a limit of detection of $3.2\;{\times}\;10^{-7}$ M. The proposed electrode could be used at a working pH range of 1.5 - 4.0.

• 대한화학회지
• /
• 제36권2호
• /
• pp.218-222
• /
• 1992

시티딘은 장미조직이 가지고 있는 시티딘 디아미나제에 의해 우리딘과 암모니아 기체를 생성한다. 이 장미조직 50mg을 암모니아 기체감응센서에 고정시켜 장미조직센서를 제조하고, 수용액 중의 시티딘을 정량하는데 최적 실험조건을 조사하였다. pH8.4, 온도 37$^{\circ}C$, 0.2M 인산 완충용액을 사용하였을 때 시티딘의 농도가 $7.0 {\times}10^{-4}$에서 $1.0{\times}10^{-2}$M까지 직선이었고, 53mV/decade의 감응기울기를 나타내었다. 검출한계는 $3.0 {\times} 10^{-4}$ M 상대표준편차는 3.4%였다. 또한 이 조직센서는 선택성이 탁월하였다.

• 한국세라믹학회지
• /
• 제54권6호
• /
• pp.535-538
• /
• 2017

Here we report the tunable electrical properties and chemical sensor of single-walled carbon nanotubes (SWCNTs) network-based devices with a functionalization technique. Formation of highly aligned SWCNT structures is made on $SiO_2/Si$ substrates using a template-based fluidic assembly process. We present a Platinum (Pt)-nanocluster decoration technique that reduces the resistivity of SWCNT network-based devices. This indicates the conversion of the semiconducting SWCNTs into metallic ones. In addition, we present the Hydrogen Sulfide ($H_2S$) gas detection by a redox reaction based on SWCNT networks functionalized with 2,2,6,6-Tetramethylpiperidine-1-oxyl (TEMPO) as a catalyst. We summarize current changes of devices resulting from the redox reactions in the presence of $H_2S$. The semiconducting (s)-SWCNT device functionalized with TEMPO shows high gas response of 420% at 60% humidity level compared to 140% gas response without TEMPO functionalization, which is about 3 times higher than bare s-SWCNT sensor at the same RH. These results reflect promising perspectives for real-time monitoring of $H_2S$ gases with high gas response and low power consumption.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1322-1326
• /
• 1999

In2O3 thick film gas sensor for detecting NOx gas of high concentration was fabricated by a screen printing technique. This work focussed on investigation of the change of sensitivity to NOx gas with firing temperatures of sensing layer and on improvement of the sensitivity by adding catalysts such as Al,. Ru, and SnO2 The cross sensitivites of sensor to CO, H2, CH4 and i-C4H10 gases were also examined under NO2 gas concentration of 200ppm Pure In2O3 gas sensor prepared at a firing temperature of 50$0^{\circ}C$ showed a maximum sensitivity to NOx gas at the operating temperature of 40$0^{\circ}C$ Al(0.004 wt%)-In2O3 sensor largely improved the sensitivities to both NO2 and NO gas and showed a superior selectivity compared with other gas sensors.