• Journal of Microbiology and Biotechnology
• /
• v.2 no.4
• /
• pp.248-254
• /
• 1992

The initial growth of Clostridium acetobutylicum was not inhibited by 1 atm of H$_2$ while H$_2$ reduced glucose consumption in a solventogenic culture of a phosphate limited 2-stage chemostat. Under 1 atm of H$_2$, a solventogenic culture consumed hydrogen, but an acidogenic culture produced hydrogen. H$_2$ consumption by the solventogenic culture was enhanced by the addition of 5 mM neutral red, an artificial electron carrier with a redox potential of -325 mV. Hydrogenase activity, measured in both directions of production and consumption, showed that activity coupled with methyl viologen is higher in an acidogenic culture than in a solventogenic culture, and that the two cultures have similar activities for methylene blue reduction. The solventogenic culture showed a higher activity coupled with neutral red than the acidogenic culture. From these results, it is hypothesized that hydrogen producing hydrogenase activity is high during the acidogenic phase, and decreases as solventogenesis starts, and that the solventogenic culture produces a second hydrogenase which uses an electron carrier other than ferredoxin. This hypothesis was supported by the fact that enzyme activities involved in electron flow can be coupled to neutral red, indepedent of ferredoxin, and that neutral red addition to the fermentation system increased butanol yield, with a decrease in production of less reduced fermentation products, and $H^2$.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.23-23
• /
• 2001

The optimum carrier concentrations were obtained by the maxmium exhaustion ratios of polyester fabrics at 80℃. The optimum concentrations of methylsalicylate, acetophenone, anisole, propiophenone, 2-ethyl hexyl alcohol, ethylene glycol and propylene glycol were 3g/ℓ, 12g/ℓ, 7g/ℓ, 5g/ℓ, 3g/ℓ, 35g/ℓ, and 40g/ℓ, respectively. Azo, anthraquinone, and quinoline disperse dyes were quite stable up to pH 10.3, but nitro disperse dye were severely hydrolyzed in alkaline dyeing. The tensile strength decreased with increasing dyebath pH because the polyester fabrics were easily decomposed by alkali. The reduction cleaning could be canceled in alkaline dyeing because the carriers were solved by alkali during dyeing.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.115-120
• /
• 2004

A bulk liquid membrane system was introduced for selective separation of an amino acid mixture. We confirmed p-diamethylaminobenzaldehyde (DAB), sulfosalicylic acid (SSA) and 1-naphtol were very useful carriers for selective separation of an amino acid mixture. As a result, Ala, Leu, Val, Phe and Ile were successfully separated by SSA, 1-naphtol in basic condition, 1-naphtol in weak acidic condition, DAB in strong acidic condition and DAB in strong basic condition. The separation mechanism was proposed by ion pair mechanism in the case of SSA and 1-naphtol and Imine bond formation mechanism was also introduced for DAB.

• Korean Journal of Animal Reproduction
• /
• v.22 no.1
• /
• pp.89-94
• /
• 1998

A study was made to investigate the effects of concerning factors with IGF-I recovery on the final IGF-I concentration in the effluent and to establish recovery conditions of IGF-I using liquid emulsion membranes(LEM). D2EHPA was best carrier among Amberlite LA2, Aliquit 336 and D2EHPA for recovery rate of IGF-I. Recovery rate of IGF-I by D2EHPA volume in the oil phase was increased as increasing D2EHPA volume, and optimal volume of D2EHPA was 5% in this experiment. The recovery rate of IGF-I by D2EHPA was increased by the decreasing from pH 7 to pH 4 of external phase. Therefore, optimal pH value was 4.0. Optimal concentrations of sulfuric acid in internal phase, paraffin oil in oil phase and Span 80 for recovery rate of IGF-I were 0.1M, 2.0% and 5%, respectively, and optimal W/O rate was 2. These results suggested that optimal conditions for recovery of IGF-I were D2EHPA(5%) as carrier, pH 4.0, 0.1M sulfuric acid, 2% paraffin oil, 2.0 W/O rate and 5.0% Span 80.

• Membrane and Water Treatment
• /
• v.9 no.1
• /
• pp.23-31
• /
• 2018

In this study, a new method called as multi-dropped liquid membrane (MDLM) which is more practical and more effective than other liquid membrane techniques is applied for transport of Zn(II) has been studied. HCl as the stripping solution and D2EHPA dissolved in kerosene as the membrane solution, has been examined. The effects of stripping solution concentration, carrier concentration, temperature and pH in the feed phase on the transport of Zn(II) have also been investigated. As a result, the optimum transport conditions of Zn(II) were obtained, i.e., the concentration of HCl solution was 0.25 M, the concentration of D2EHPA was $8{\times}10^{-3}M$, and pH value in the donor phase was 5.00. Under the optimum conditions, the transport percentage of Zn(II) was up to >99% during the transport time of 80 min when the initial concentration of Zn(II) was $120mgL^{-1}$. The activation energy is calculated as $5.30kcalmol^{-1}$. The value of calculated activation energy indicates that the process is diffusionally controlled by Zn(II) ions. The experiments have demonstrated that D2EHPA derivative is a good carrier for Zn(II) transport through MDLM in the study.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.410-415
• /
• 2002

Adrenal glucocorticoids, secreted by the stimulus of adrenocorticotropic hormone (ACTH), are catabolic hormones in the pig. The present study was conducted to find whether active immunization against ACTH would suppress cortisol secretion accompanied by an increased growth rate in growing-finishing barrows. ACTH was conjugated to keyhole limpet hemocyanin or human histone using glutaraldehyde or 3-maleimidobenzoic acid N-hydroxysuccinimide, under a 2 (ACTH vs no hapten)${\times}$2 (carrier)${\times}$2 (crosslinker) factorial arrangement of treatments. Cross-bred barrows weighing approximately 25 kg were injected with an ACTHcarrier or carrier only conjugate every 4th wk and slaughtered at approximately 110 kg body weight. Antibodies against ACTH were detected in serum, as determined by $[^{125}I]$ACTH-binding activity, in most animals immunized against the ACTH conjugate, but not in carrier only-injected animals, except for the animals which had received the hapten conjugated to histone via glutaraldehyde. The $[^{125}I]$ACTH-binding activity of serum increased after the second booster injection, but overall ACTH antibody titer was very low. Main effect was not detected not only for the carrier and crosslinker but for the hapten in serum cortisol concentration, ADG, loin muscle area, backfat thickness and longissimus muscle composition including fat and protein. In addition, bound $[^{125}I]$ACTH percentage had no relation to cortisol concentration or to any of the above growth-related variables. Results suggest that ACTH or its conjugates used in the present study were not immunogenically potent enough to affect the glucocorticoid secretion and thus the growth of the immunized pigs.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.2
• /
• pp.71-82
• /
• 1996

This study has been undertaken to evaluate hydrophobic cyclodextrin(CD) derivatives as a sustained release carrier of azidothymidine(AZT), AZT, which has potent activity against AIDS and AIDS-related complex as thymidine analogue, has been reported that it has significant toxicity and short half life. Therefore, it is necessary to design sustained release oral dosage form to avoid undesirable side effects attributable to an excessive plasma concentration and to reduce the frequency of administration of AZT. Inclusion complexes of AZT with $acetyl-{\beta}-cyclodextrin\;(AC{\beta}CD)$ and $triacetyl-{\beta}-cyclodextrin(TA{\beta}CD)$ were prepared by solvent evaporation method. Interactions of AZT with CD were investigated by Differential Scanning Calorimetry(DSC) and Infrared Spectrophotometry(IR). The decreasing order of water solubilities of AZT and AZT-CD inclusion complexes were as follows; $AZT\;(27.873{\pm}0.015,mg/ml)\;>\;AZT-AC{\beta}CD\;(3.377{\pm}0.003)\;>\;AZT-TA{\beta}CD\;(2.528{\pm}0.001)$. Partition coefficients of $AZT-AC{\beta}CD\;and;\AZT-TA{\beta}CD$ inclusion complexes were increased by 1.27-fold, 1.54-fold in pH 1.2 and 1.32-fold, 1.47-fold in pH 6.8 in comparison with that of AZT. The mean dissolution time (MDT, min) which represents the rapidity of dissolution rate of AZT, $AZT-AC{\beta}CD,\;AZT-TA{\beta}CD$ were 5.12, 14.02 and 19.38 min in pH 1.2 and 2.52, 15.19 and 18.19 min in pH 6.8. AZT was very rapidly and completely dissolved in pH 1.2 and pH 6.8 within 5 minutes. But AZT-CD inclusion complexes showed the sustained release pattern in comparison with AZT alone. The simultaneous in situ nasal and jejunal recirculation study to compare the intrinsic absorptivity and the property of absorption sites revealed that the absorption of $AZT-TA{\beta}CD\;(N:35.35{\pm}1.08%,\;J:27.47{\pm}1.18%)$ was more than that of $AZT\;(N:16.89{\pm}2.25%,\;J:15.86{\pm}2.33%)$. The above results suggest that $TA{\beta}CD$ which is a hydrophobic cyclodextrin may serve as sustained release carrier with absorption enhancing effect.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.99.2-99.2
• /
• 2010

This paper investigates the dependence of a-Si:H/c-Si passivation and heterojunction solar cell performances on various cleaning processes of silicon wafer and surface morphology. It is observed that passivation quality of a-Si:H thin-films on c-Si wafer highly depends on wafer surface conditions. The MCLT(Minority carrier life time) of wafer incorporating intrinsic (i) a-Si:H as a passivation layer shows sensitive variation with cleaning process and surface morpholgy. By applying improved cleaning processes and surface morphology we can obtain the MCLT of $200{\mu}sec$ after H-termination and above 1.5msec after i a-Si:H thin film deposition, which has implied open circuit voltage of 0.720V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.203-206
• /
• 2004

In this study the ITO thin films were prepared by using FTS(Facing Targets Sputtering) system. The electric characteristics, transmittance, surface roughness of ITO thin films were investigated as a function of varying input current and working gas pressure at room temperature. As a result, the ITO thin film was fabricated with resistivity $6{\times}10^{-4}[\Omega{\cdot}cm]$, carrier mobility $52.11[cm^2/V{\cdot}sec]$, carrier concentration $1.72{\times}10^{20}[cm^{-3}]$ of ITO thin film at working pressure 1mTorr and input current 0.6A.