• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.599-606
• /
• 2021

In this study, an experiment and a reaction characteristic study were conducted to enhance the reaction activity of V₂O₅/WO₃/TiO₂ at 300 ℃ or less by adding selenium to the support, in a selective catalytic reduction method using ammonia as a reducing agent to remove nitrogen oxides. Se-TiO₂ and TiO₂ were synthesized using the sol-gel method, and used as a support when preparing V₂O₅/WO₃/TiO₂ and V₂O₅/WO₃/Se-TiO₂ catalysts. The reaction activity of our catalyst was compared with that of a commercial catalyst. The denitration efficiency of the catalyst using TiO₂ prepared by the sol-gel method was lower than that of the catalyst prepared using commercial TiO₂, but was improved by the addition of selenium. Thus, the effect of selenium addition on the catalyst structure was analyzed using BET, XRD, Raman, H₂-TPR, and FT-IR measurements and the effect of the increase in specific surface area by selenium addition and the formation of monomer and complex vanadium species on reaction characteristics were confirmed.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.3
• /
• pp.437-445
• /
• 2016

This paper discussed the effect of ammonia concentration adsorbed on fly ash for the ammonia emission as AAFA (Ammonia Adsorbed Fly Ash) produced from coal fired plants due to operation of NOx reduction technologies was landfilled with distilled or sea water at closed and open systems, respectively. Ammonia bisulfate and sulfates adsorbed on fly ash is highly water soluble. The pH of ammonium bisulfate and sulfate solution had significant effect on ammonia odor emission. The effect of temperature on ammonia odor emission from mixture was less than pH, the rate of ammonia emission increased with increased temperature when the pH conditions were kept at constant. Since AAFA increases the pH of solution substantially, $NH_3$ in the ash can release the ammonia order unless it is present at low concentration. $NH_4{^+}$ ion is unstable in fly ash and water mixtures of high pH at open system, which is changed to nitrite or nitrate and then released as ammonia gas. The proper conditions for < 20 ppm of ammonia concentration released from the AAFAs landfilled in ash pond were explored using an open system with sea water. It was therefore proposed that optimal operation to collect AAFA of less than 168 ppm ammonia at the electrostatic precipitator were controlled to ammonia slip with less than 5 ppm at SCR/SNCR installations, and, ammonia odor released from mixture of fly ash of 168 ppm ammonia with sea water under open system has about 20 ppm.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.5
• /
• pp.714-720
• /
• 2011

Ethanol was used as reducing agent to remove $NO_x$ exhaust from the stationary source. Pre-treatment with sulfuric acid over $Ag/Al_2O_3$ catalyst was dedicated to overcome the $SO_2$ poisoning effect. The $NO_x$ reduction experiment was performed under the simulated condition of power plant The increased surface area with higher CPSI devoted to increase de-$NO_x$ yield. De-$NO_x$ yield of the $NO_x$ exhaust containing 20 ppm of $SO_2$ increased after acid treatment with 0.7% $H_2SO_4$ over 4.0% $Ag/Al_2O_3$, where the increased dispersion of Ag found from the results of XRD and XPS was the dominant factor for the increased de-$NO_x$ yield. However, the reason for the decreased de-$NO_x$ yield with the acid treatment of higher concentration (1.0% and 2.0%) of $H_2SO_4$ was found to be due to the formation of $Ag_2SO_4$ crystallites found from XRD result. Acid-treated $Ag/Al_2O_3$ catalyst showed maximum de-$NO_x$ yield at higher temperature than non-treated $Ag/Al_2O_3$ catalyst did.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.605-609
• /
• 2011

We study on the oxygen behavior of $V_2O_5/TiO_2$ catalysts in the $NH_3$-selective catalytic reduction (SCR) prepared by the ball milling processing. There are not any changes in crystal structure and surface area of the $TiO_2$ catalyst by ball milling, but the maximal reduction temperature decreased in $H_2$-temperature programmed reduction (TPR) analysis. Experimental observations with various concentrations of oxygen indicate that all catalysts showed a very low NOx conversion rate in the absence of oxygen and the reactivity of ball milled catalyst higher depending on the oxygen. It is occurred because the degree of participation of atmospheric oxygen and lattice oxygen is great than that of the not-milled catalyst.

• Journal of Power System Engineering
• /
• v.20 no.1
• /
• pp.18-23
• /
• 2016

As diesel engines have high power and good fuel economy on top of less $CO_2$ emissions, their market shares are increasing not only in commercial vehicles but also in passenger cars. LNT, urea-SCR and combination of them have been developed for after-treatment of the exhaust gas to reduce NOx on diesel vehicles. The aim of this study is to investigate the $NH_3$ generation characteristics of LNT catalyst downstream. It was found from the experiments of the LNT catalyst that $H_2$ was useful as a reductant in SCR catalyst because it can enhance the de-NOx performance and improve $NH_3$ selectivity. The $NH_3$ generation of the LNT, when hydrothermally aged at $900^{\circ}C$ for 18 hr, increased to about 90ppm at $300^{\circ}C$ due to Pt sintering and Ba agglomeration. LNT catalyst was most sulfur poisoning at $500^{\circ}C$. The $NH_3$ slip increased due to the reduction of residence time according to SV increase.

• Journal of Power System Engineering
• /
• v.15 no.2
• /
• pp.55-60
• /
• 2011

The popularity of diesel engines is derived primarily from their higher thermal efficiency resulting from higher compression ratio. NOx removal from the diesel emissions is very important to meet stringent emission regulations. NOx emission from diesel engines is removed by an urea-SCR or an LNT system. The urea-SCR system needs the urea-solution supply system with concentration and level sensor. This study was carried out to develop a sensor for the measurement of urea-solution concentration by an electric conductivity method. Considering experimental parameters were the material of electrode, two kinds of electric power(AC or DC), the distance between two electrodes, and the length of electrode. It was found that the AC electric power was more useful to measure the urea-solution concentration compared to DC, because it prevented an ionization of the urea-solution. The silver rod coated with Pt is the most useful electrode, tendency of which is similar to Pt rod, and the cost is more economic. We could also find out the optimum distance between two electrodes and the length of electrode was 10mm and 3mm, respectively.

• Resources Recycling
• /
• v.26 no.4
• /
• pp.42-49
• /
• 2017

As a fundamental study for the separation of vanadium and tungsten from the leaching solution obtained from the soda roasting and water leaching process of spent SCR (Selective Catalytic Reduction) catalyst was carried out. The precipitation behaviors of vanadium and tungsten using the artificial solution (V: $1g{\cdot}L^{-1}$, W: $10g{\cdot}L^{-1}$) was investigated depending on temperature, NaOH concentration and the amount of $CaCl_2$ (aq.) added. V (aq.) was selectively precipitated at lower temperature than 293 K while tungsten also was precipitated at higher temperature. Precipitation rate of V and W was decreased by the increasing concentration of NaOH. On the other hand, excess Ca addition induced the increase of precipitation rate for V and W due to the formation of $Ca(OH)_2$ following the pH decline. The response surface methodology was employed to optimize the selective precipitation. Vanadium of 99.5% and tungsten of 0.0% was precipitated at $0.5mol{\cdot}L^{-1}$ of aqueous NaOH and 1 equivalent ratio of $CaCl_2$ at 293 K.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.68-74
• /
• 1999

The Concentrations of PCDDs/PCDFs and their precusors(chlorophenols, chlorobenzenes, PCB) were analyzed from the dioxin control device such as EP and SCR to know the emission patterns of these compounds and find the dioxin index compounds. The dioxin concentration increased 7 times in outlet part than inlet part of EP and the concentration of CBs, CPs and PCBs also were increased through this control device. These phenomia may be related to the operating temperature of Electroprecipitator(EP), which the operating temperature is near the $300^{\circ}C$, the method of the decreasing the operating temperature need to consider to prevent the formation of these compounds. In the selected catalytic reactor with wet scrubber(SCR+WS), these compounds were removed after passing the device over 90% for CPs, 30~40% for CBs and 60% for PCBs. But, the systematic study have to perform to reduce the formation of PCDDs/PCDFs and precusors.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.3809-3813
• /
• 2012

Background and Objectives: Colorectal cancer (CRC) is a major health problem in the Kingdom of Saudi Arabia (KSA). Our aim was to characterize the epidemiology of CRC in the Saudi population. Design and Setting: Retrospective analysis of all cases of CRC recorded in the Saudi Cancer Registry (SCR) between January 2001 and December 2006 amongst Saudi citizens in KSA. Patients and Methods: Data were retrieved from the database of the SCR. Descriptive statistics was performed using SPSS. Results: A total of 4,201 cases of CRC were registered in the SCR. The incidence of CRC increased between 2001 and 2006. The mean age of patients at the time of diagnosis was 58 years; most patients were above 45 years of age (n=3322; 79.1%). At the time of diagnosis, 977 patients (23.0%) presented with localized disease and 1,018 (24.0%) had distant metastasis. The most frequent pathological variant was adenocarcinoma (73%), with grade 2 (moderately differentiated) being the most common grade among all variants (61%). For all cancer grades, the frequency of CRC was significantly higher among patients >45 years (P=0.004), who presented with more advanced disease (stages III and IV) (P=0.012). Based on logistic regression, age >45 years was associated with advanced regional presentation (P=0.001). Tumor grade was associated with advanced regional presentation and metastasis. Conclusions: There was an increase in the incidence of CRC between 2001 and 2006. The age at the time of diagnosis was low when compared with reports from developed countries. A nationwide approach is needed to encourage and illustrate the importance of screening programs.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.123-125
• /
• 2007

포항가속기연구소가 추진 중인 제4세대 방사광가속기에는 100 PPM급의 클라이스트론 펄스전압 안정도가 요구된다. 이러한 안정도는 PFN(pulse forming network)에 충전되는 전압을 얼마나 정밀하게 제어하는가에 따라서 결정된다. PFN의 최종운전 전압은 deQing circuit에 triggering되는 시점에 따라서 결정된다. DeQing trigger system은 PFN의 충전전압과 기준전압을 비교하여 충전전압이 기준전압보다 커지는 시점에서 charging choke(충전 쵸크)의 2차에 구성된 deQing 회로의 SCR를 트리거 시켜서 충전 쵸크 1차와 2차의 권선비율이 25:1인 충전 쵸크의 2차를 단락시켜 1차에 흐르는 전류를 2차로 빼주어서 PFN 커패시터에 더 이상 충전되지 않게 하는 구조로 되어있다. DeQing circuit에 triggering되는 시점을 정밀하게 제어하기 위하여 PFN 충전전압을 미분하여 그 출력전압에 비례하여 트리거 출력을 지연시키는 기능과 analog 신호를 digital 신호로 변환하는 기능을 사용하였다. 이 논문에서는 deQing 시스템에 관련된 회로 및 시험결과에 대하여 설명하고자 한다.