• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.57-61
• /
• 2007

The current limiting characteristics of hybrid SFCL with additional power electronic devices was investigated in order to improve operation reliabilities. The hybrid SFCL developed consists of a superconducting trigger (S/T) part, a fast switch (F/S) module and a current limiting (C/L) part. Although hybrid SFCL had shown a excellent current limiting characteristics, this device was rather vulnerable to the residual arc currents which could exist during fast switch operation. This undesirable arc should be extinguished as quickly as possible in order to implement perfect fault current commutation. So, in order to eliminate the residual arcs between fast switch contacts, the power electronic devices (IGBT or GTO) were connected in series between the S/T part and the interrupter of the F/S module. According to the fault tests conducting with an input voltage of $270\;V_{rms}$ and a fault current of $5\;kA_{rms}$, The power electronic devices could perfectly remove the arc generated between the contacts of the interrupter within 4 ms after the fault occurred. From the test analysis, it was confirmed that the hybrid SFCL could enhance the operation reliability by adopting additional power electronic devices.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.177-181
• /
• 2003

Need of power stability, reliability is increased, as using of sensitive: nonlinear load are increasing. Therefore, Power Quality Problems become the center of public interest. Many kinds of algorithms have been studied for monitoring of Power Quality Problems. Monitoring algorithms of using RMS, FT and the others are easy to applicate to system. But, it is not enough to monitor all of Foyer. Quality problems. Wavelet Transform is more proper to applicate. so, This paper presents measurement system using discrete wavelet transform.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1440-1443
• /
• 1999

This paper proposes fault detection method using a neural network & fuzzy logic on distribution lines. Fault on distribution lines is simulated using EMTP. The pattern of high impedance fault on pebbles, ground and short-circuit fault were take as the learning model. In this paper proposed fault detection method is evaluated on various conditions. The average values after analyzing fault current by FFT of even odd harmonics and fundamental rms were used for the neural network input. Test results were verified the validity of the proposed method

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1569-1571
• /
• 2000

The ageing process was checked by leakage current monitoring in Salt Fog Method. In order to monitor leakage current, DAS with 12-bit, 8-channel A/D converter was prepared. The monitored components of leakage current were averages of the rms and peak, max peak, cumulative charge, and the cumulative number of peak pulses. The acquired data were stored to the disc periodically. And, surface conductivity was measured to investigate loss of hydrophobicity. The results suggest that surface conductivity and leakage current are well corresponding to initial loss of hydrophobicity.

• 한국안전학회지
• /
• 제24권3호
• /
• pp.13-18
• /
• 2009

This paper is purposed to develop DAQ H/W, S/W and DB which can be used in developing electrical fire alarm system or in analyzing electrical fire cause, by detecting and monitoring precursor signals which have high possibility leading to electrical fire on electrical distribution wires. In this paper, developed was DAQ H/W adopting the C8051FXXX CPU which can analyze the measurement signals of current and voltage in electrical distribution wires, other CPU was investigated in view of the best digital sampling rate on the basis of previous researches for electrical fire alarm system. Also, the S/W which can interface with DAQ H/W's communication protocol and can be applied for electrical fire causes analysis, are embodied by LabVIEW. The combined DAQ H/W and S/W could analyze efficiently normal as well as abnormal electrical signals such as RMS value, instantaneous value of current and voltage, frequency signals etc, on the electrical wires. Also, DB system was constructed for recording various analysis results for precursor signals including voltage and current signals. The results by simulator and experiment showed that the suggested scheme with DAQ H/W, S/W and DB in this paper has high usability.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권4호
• /
• pp.387-394
• /
• 2013

As the feature size of integrated circuits continues to decrease, the challenge of achieving an oxidation-free exposed layer after photoresist (PR) stripping is becoming a critical issue for semiconductor device fabrication. In this article, the hydrogen plasma characteristics in direct plasma and the PR stripping rate in remote plasma were studied using a $120{\Phi}$ cylindrical inductively coupled plasma source. E mode, H mode and E-H mode transitions were observed, which were defined by matching the $V_{rms}$ and total impedance. In addition, the dependence of the E-H mode transition on pressure was examined and the corresponding plasma instability regions were identified. The plasma density and electron temperature increased gradually under the same process conditions. In contrast, the PR stripping rate decreased with increasing proportion of $H_2$ gas in mixed $H_2/N_2$ plasma. The decrease in concentration of reactive radicals for the removal of PR with increasing $H_2$ gas flow rate suggests that NH radicals have a dominant effect as the main volatile product.

• 한국인터넷방송통신학회논문지
• /
• 제10권2호
• /
• pp.1-6
• /
• 2010

근거리 무선 통신시스템은 사무실과 가정의 응용으로 빠르게 확장하고 있다. 무선 네트워크의 개발은 더 높은 data rate의 요구를 만족하도록 수행되었다. 이것으로 높은 주파수에서 동작하는 통신시스템 개발의 필요성이 강조된다. 따라서 근거리 무선 통신 네트워크는 테라헤르츠 주파수 쪽으로 옮겨갈 것으로 기대된다. 실내의 벽과 바닥, 천장에 의해 발생하는 전파 환경 분석은 3차원 광선방출기법을 이용하였다. 또한 테라헤르츠 주파수에서의 rough한 건물 벽면의 특성을 파악하기 위해 광학적으로 두꺼운 smooth한 건물 재질의 반사 모델로부터 접근하여 나타내었다. 전파환경 시뮬레이션 결과평균 수신 전력이 참고문헌의 결과와 유사한 결과를 얻을 수 있었다. 또한, 실내 공간의 크기가 $6m(L){\times}5m(W){\times}2.5m(H)$에서 콘크리트 벽의 경우 RMS 지연시간은 9.11 ns로 계산되었다.

• 한국항해항만학회지
• /
• 제38권2호
• /
• pp.121-126
• /
• 2014

본 논문은 저가형 GPS 수신 모듈에 DGPS 서비스를 적용하기 위한 방안으로 NMEA GPGSV 데이터의 위성 배치 정보에 포함된 위성 앙각과 방위각으로 관측 행렬을 구성한 후, 거리기반 보정정보를 위치영역으로 투영하여 기 산출된 위치 오차 벡터를 수정하는 방안을 제시하였다. 저가형 수신기인 U-blox LEA-5H 모델의 출력 데이터에 제안한 알고리즘을 적용한 결과 주 활동 시간인 낮 시간에 수평 오차 RMS를 1.8m에서 1m 이내로 줄였으며, 수직 정확도는 RMS 5.8m에서 1.4m로 75% 향상시킴을 확인하였다. 본 논문에서 제안하는 방식은 하드웨어의 변경없이 소프트웨어만으로 저가형 GPS의 성능을 DGPS 수준으로 향상시키는 기법이므로, 소비자와 제조사의 부담을 경감시켜 향후 제공될 고정밀 측위 서비스 인프라의 활성화에 기여할 수 있을 것으로 기대된다.

• 지구물리
• /
• 제3권1호
• /
• pp.13-24
• /
• 2000

제주도 내의 13개의 수준점에서 GPS를 측정하였으며, 이에 의한 GPS/Levelling 지오이드와 PNU95 지오이드를 비교, 분석하여 보았다. GPS의 측정결과 각. 수준점의 타원체 높이를 ${\pm}3\;cm$ 이내의 정밀도로 측정하였다. 계산된 GPS/Levelling 지오이드는 제주도의 지형 변화를 잘 나타내고 있으며, 제주도에서 지오이드와 지형의 상관식은 다음과 같다. $$N\;=\;0.001082\;{\times}\;h\;+\;25.458\;{\pm}\;0.227\;s.d.$$ 계산된 GPS/Levelling 지오이드와 PNU95 지오이드는 잘 일치하고 있으며 두 지오이드의 RMS 차이는 0.14 m이다.

• 한국해안·해양공학회논문집
• /
• 제31권6호
• /
• pp.356-367
• /
• 2019

본 연구는 olaFlow 모델에 의한 혼상류수치해석법을 적용하여 저천단구조물에 의한 불규칙파랑의 변동특성을 수치적으로 검토한다. 목표스펙트럼에 의한 불규칙파형과 측정된 불규칙파형과의 비교 및 이로부터 산정된 두 주파수스펙트럼의 비교로부터 olaFlow의 타당성을 검증하고, 2차원저천단구조물에 의한 불규칙파의 주파수스펙트럼의 변동, 파전달율, H_rms의 공간분포, 평균유속과 평균난류운동에너지의 공간분포 등을 수치적으로 검토한다. 이로부터 LCS 외해측의 전면에서 시계방향의 해빈류와 반시계방향의 순환류셀이 형성되고, 내해측의 정수면 근방에서 항내로 향하는 강한 일방향흐름이 발생되는 등의 중요한 결과를 얻을 수 있었다.