• Nuclear Engineering and Technology
• /
• 제29권4호
• /
• pp.280-290
• /
• 1997

The robust controller for the nuclear reactor power control system is designed. The nuclear reactor is modeled by use of the point kinetics equations and the singly lumped energy balance equations, Since the model is not exact, the controller which can make the actual system robust is necessary. The perturbed plant is investigated by employing the uncertainties of the initial power level and the physical properties, and by introducing the delay into the modeled plant The overall system is configured into the two port model and the H$\infty$ controller is designed. In designing the H$\infty$ controller, two factors of the loop shaping and the permissible magnitude of control input are taken into account The designed controller provides the sufficient margins for the robustness, and the transients of the system output power and the control input satisfy their associated requirement.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.515-515
• /
• 2000

The performance of dynamic path following of a wheeled mobile robot with nonholonomic constraints has some drawbacks such as the influence of the initial state. The drawbacks can be overcome by the temporary path generator and modified output. But with the previous input-output linearization method using them, it is difficult to tune the gains, and if there are some modeling errors, the low gain can make the system unstable. And if a high gain is used to overcome the model uncertainties, the control inputs are apt to be large so the system can be unstable. In this paper. an H$_{\infty}$ controller is designed to guarantee robustness to model parameter uncertainties and to consider the magnitude of control inputs. And the solution to Hamilton Jacobi (HJ) inequality, which is essential to H$_{\infty}$ control design, is obtained by nonlinear matrix inequality (NLMI).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.330-335
• /
• 1995

The actuator's response delay, disturbance and measurement noise can often cause a significant error in the target tracking of an underwater vehicle. The first purpose of this paper is error analysis about motion of an underwater vehicle when the closed loop system has actuator and disturbance and noise. The underwater vehicle is simulated for cases of various disturbances. The second purpose is robust controller design for the underwater vehicle with parameter uncertainty. So, two robust control methods are applied for the underwater vehicle. One is standard $H_{\infty}$ control, and the other is time-varying sliding mode control with modified saturation function. Suboptimal design parameters for $H_{\infty}$ control, and design parameters for time-varying switching surfaces are provided Simulations for the two controllers are carried out and their performances are analyzed.lyzed.

• 제어로봇시스템학회논문지
• /
• 제7권2호
• /
• pp.102-108
• /
• 2001

In this paper, an active noise controller for a communication headset was designed. In a communication headset, there exist information signals such as voices from the end for the communication line as well as also, undesirable noises with are induced by external noise sources such as engine noises. Therefore, it is necessary to reduce the external noises for clear hearing of the communication signals. This problem was solved by robust H(sub)$\infty$ controller to reduce noise and a compensator for information signals The designed controller was implemented using TMS320C31 DSP Op-amp, and several experiments were performed to verify its performance. The results showed that the controller reduces the undesirable noises sufficiently, while communication signals are not reduced.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.180-188
• /
• 1999

${\mu}$-synthesis is applied to design a robust controller for a seeker scan loop system which has model uncertainty and is subject to a external disturbance due to abrupt missile maneuver. The issue of modelling a real-valued parametric uncertainty of a physical seeker scan loop system is discussed. The two-degree-of-frame control structure is employed to obtain better performance. It is shown that ${\mu}$-synthesis provides a superior framework for the robust control design of a seeker scan loop system which exhibits robust performance. The proposed robust control system satisfies design requirements, and especially shows good scanning performances for conical and rosette scan patterns despite parametric uncertainty in real system model.

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.361-368
• /
• 2015

This paper deals with a robust fine seek controller design problem with multiple constraints using a genetic algorithm. A robust $H\infty$ constraint is introduced to attenuate effectively velocity disturbance caused by the eccentric rotation of the disk. A weighting function is optimally selected based on the estimation of velocity disturbance and the estimated minimum velocity loop gain. A robust velocity loop constraint is considered to minimize the variances of the velocity loop gain and bandwidth against the uncertainties of fine actuator. Finally, a robust fine seek controller is obtained by solving a genetic algorithm with an LMI condition and an appropriate objective function. The proposed controller design method is applied to the fine seek control system of a DVD recording device and is evaluated through the experimental results.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.43-43
• /
• 1999

• 전자공학회논문지SC
• /
• 제45권3호
• /
• pp.32-41
• /
• 2008

본 논문에서는 blu-ray 디스크 드라이버의 트랙킹 서보시스템에 대하여 플랜트와 제어기의 불확실성을 보상하는 견실비약성 $H^{\infty}$ 상태궤환 제어기 설계방법을 제안한다. 플랜트와 제어기의 불확실성을 매개변수화 선형행렬부등식(PLMI: parameterized linear matrix inequality)을 이용하여 구조화된 불확실성의 형태로 표현하며, Lyapunov 함수를 이용하여 구조적인 제어기의 이득섭동을 고려한 견실비약성 $H^{\infty}$ 상태궤환 제어기가 존재할 충분조건 및 제어기 설계방법을 PLMI의 형태로 제안한다. 또한, 완화기법(relaxation technique)을 통하여 PLMI를 유한개의 LMI의 형태로 변환하여 견실하고 최적화된 제어기 이득과 제어기 섭동 범위를 계산하고, 모의실험을 통해서 제시된 제어기의 타당성 및 견실성(robustness)과 비약성(non-fragility)을 검증한다.

• 전자공학회논문지S
• /
• 제35S권6호
• /
• pp.55-65
• /
• 1998

산업현장에서는 반도체 공정의 산화막(oxidation)과 소둔(annealing) 공정에서 생산성을 향상시키기 위해 기존의 확산로(furnace)보다 RTP(rapid thermal processing) 시스템을 많이 사용하고 있다. 이러한 RTP 시스템의 주요 제어대상은 정확한 웨이퍼(wafer)의 온도조절과 웨이퍼 내의 균일성이다. 본 논문에서는 RTP 시스템의 온도변화와 같은 외란에 대한 견실안정성 문제를 해결하기 위해 하중 혼합감도함수를 이용하여 $H^{\infty}$ 제어기를 설계하고, 온도추적 및 웨이퍼 내의 균일성 등의 견실성능 개선은 루프쉐이핑 방법을 이용한다. 온도에 따른 선형화된 모델은 차수문제로 인하여 실 시스템 구현시 제약조건이 있으므로 한켈(Hankel), 자승근 균형(square-root balanced) 및 슈어 균형(Schur balanced) 방법을 사용하여 모델 차수축소를 하여 제어기를 설계한다. 원래의 모델과 축소된 모델에 대해 성능을 비교하고 시뮬레이션을 통하여 설계한 제어기의 견실안정성과 성능을 확인한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.569-572
• /
• 1996

Explicit state-space formulate for an H$_{.inf}$ based two-degrees-of-freedom robust controller are derived in discrete-time. The controller provides robust stability against coprime factor uncertainty, and a degree of robust performance in the sense of making the closed-loop system match a prespecified reference model. It is shown that the controller consists of a plant observer, the chosen reference model, and a generalized state feedback law associated with the plant and model states. The controller structure is shown to be relatively simple and thus may reduce the computational load on the digital control processor.