• Current Research on Agriculture and Life Sciences
• /
• v.7
• /
• pp.41-46
• /
• 1989

The seeds of Malus sieboldii were collected in late fall of 1988 and stored in cold stratification condition for 15 weeks. Growth regulators such as $GA_3$, BA and ABA were treated to the seed to know germination capacity and seedling growth. The results were as follows. 1) Higher germination was achieved in $GA_3$ and BA plots, But ABA treatment showed lower germination percentage and physiological dwarf and also induced to the secondary dormancy condition in partly. 2) Average length of time for germination was delayed over 2 days in ABA plot when comparing with the other plots. 3) Average length of plumule and radicle also was inhibited by ABA treatment. This means lower seedling vigor. 4) Fresh and dry weight of the seeding were higher in BA plot while ABA plot was lower and undesirable seedling was produced. From above mentioned results, it is believed that ABA treatment to the seed induced the secondary dormancy and physiological dwarf pattern. Therefore, utilization of BA can be produced the normal seedling, the authors believed.

• ETRI Journal
• /
• v.18 no.4
• /
• pp.339-346
• /
• 1997

Good quality a-axis oriented thin films of $YBa_2Cu_3O_{7-x}$ may be grown by the use of a $PrBa_2Cu_3O_{7-x}$ (PBCO) layer as a template. Here we present a detailed study of the nucleation of the PBCO layer, explaining the orientations observed. It is determined that the wavy surface of a $LaSrGaO_4$ (LSGO) (100) substrate consists of the {101} planes by observing cross-sectional transmission electron microscopy images of the interface between the PBCO film and the substrate. The images and selected area diffraction patterns show that a mixed c-and b-axis oriented PBCO layer was initially grown on the substrate, followed by pure b-axis oriented PBCO growth. We explain that the c-axis oriented growth is the result of the growth of the PBCO (019) planes on the LSGO (101) planes. We conclude that the nucleation and growth of the PBCO films at the initial stages depends on the crystallographic plane of the substrate surfaces, however, as the film grows further, the kinetics of the deposition process favors b-axis oriented growth.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.6
• /
• pp.491-496
• /
• 2000

A RAG25 gene regulating flowering time was introduced into Codonopsis lanceolata through high efficiencies (ca. 90%) of plant regeneration. The leaf explants were immersed in YEP media containing Agrobacterium tumefaciens (pGA 1209) harboring RAG25 gene, and cocultivated for 3 days. After cocultivation, they were cultured in shoot inducing media (SIM), N2B2 (NAA 2 mg/L, BA 2 mg/L and kanamycin 20 mg/L) and N2B4 (NAA 2 mg/L, BA 4 mg/L and kanamycin 20 mg/L), and the putative transformants were regenerated. The introduction of nptII and RAG25 gene into Codonopsis lanceolata was confirmed by 0.7 kb and 0.6 kb bands from polymerase chain reaction and reconfirmed by Southern hybridization using PCR product of RAG25 gene.

• Korean Journal of Plant Resources
• /
• v.10 no.1
• /
• pp.39-44
• /
• 1997

This study was conducted to determine the effects of growth regulators, temperature, and light on the germination of Chwinamul(Aster scaber, Aster tataricus, Synurus deltoides, Solidago virga-aurea var. asiatica, Ligularia fisheri) seeds. Compared to GA, IAA, and kinetin, BA (150ppm) stimulated best seed germination of all five species under the both light and dark condition at $25^{\circ}C$. The effect of growth regulators was not observed significantly under the light condition except of Ligularia fisheri and Synurus deltoides while it was shown markedly under the dark condition. Germination rates of Ligularia fisheri and Synurus deltoides in different concentration of BA were relatively higher under the light at $15^{\circ}C$ while those of other species varied in different concentration and temperature.

• Journal of the Korean Ceramic Society
• /
• v.33 no.3
• /
• pp.313-320
• /
• 1996

We have fabricated an in-plane aligned a-axis oriented YBa2Cu3O7-x (a-YBCO) thin film on a LaSrGaO4(100) substrate with a PrBa2Cu3O7-x(PBCO) template layer by two step plused laser deposition using 308 nm XeCl excimer laser. A YBCO layer and PBCO layer grown at low temperatures were used as template layers. We have investigated the effect of the deposition temperature of template layers on the superconducting and struc-tural properties of in-plane aligned a-YBCO thin films. An optimal deposition temperature of the PBCO template layers was 630. In-plane aligned a-YBCO thin films showed an anisotropy ratio in resistivity of 11.5 and a zero resistance temperature of 88 K.

• Korean Journal of Materials Research
• /
• v.21 no.5
• /
• pp.250-254
• /
• 2011

We have synthesized bluish-green, highly-efficient $BaSi_2O_2N_2:Eu^{2+}$ and $(Ba,Sr)Si_2O_2N_2:Eu^{2+}$ phosphors through a conventional solid state reaction method using metal carbonate, $Si_3N_4$, and $Eu_2O_3$ as raw materials. The X-ray diffraction (XRD) pattern of these phosphors revealed that a $BaSi_2O_2N_2$ single phase was obtained. The excitation and emission spectra showed typical broadband excitation and emission resulting from the 5d to 4f transition of $Eu^{2+}$. These phosphors absorb blue light at around 450 nm and emit bluish-green luminescence, with a peak wavelength at around 495 nm. From the results of an experiment involving Eu concentration quenching, the relative PL intensity was reduced dramatically for Eu = 0.033. A small substitution of Sr in place of Ba increased the relative emission intensity of the phosphor. We prepared several white LEDs through a combination of $BaSi_2O_2N_2:Eu^{2+}$, YAG:$Ce^{3+}$, and silicone resin with a blue InGaN-based LED. In the case of only the YAG:$Ce^{3+}$-converted LED, the color rendering index was 73.4 and the efficiency was 127 lm/W. In contrast, in the YAG:$Ce^{3+}$ and $BaSi_2O_2N_2:Eu^{2+}$-converted LED, two distinct emission bands from InGaN (450 nm) and the two phosphors (475-750 nm) are observed, and combine to give a spectrum that appears white to the naked eye. The range of the color rendering index and the efficiency were 79.7-81.2 and 117-128 lm/W, respectively. The increased values of the color rendering index indicate that the two phosphor-converted LEDs have improved bluish-green emission compared to the YAG:Ce-converted LED. As such, the $BaSi_2O_2N_2:Eu^{2+}$ phosphor is applicable to white high-rendered LEDs for solid state lighting.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.1
• /
• pp.42-48
• /
• 2011

This experiment was conducted to improve postharvest quality and extended vase life of Korean native Aster koraiensis Nakai for use as cut flowers. Aster koraiensis Nakai cut flowers were treated with various pretreatment and holding solution. Postharvest pretreatment with 3% sucrose + $200mg{\cdot}L^{-1}$ HQC + $50mg{\cdot}L^{-1}\;AgNO_3$ + $50mg{\cdot}L^{-1}$ BA and 3% sucrose + $200mg{\cdot}L^{-1}$ HQC + $50mg{\cdot}L^{-1}\;AgNO_3$ + $150mg{\cdot}L^{-1}$ citric acid for 16 hours extended vase life of cut Aster koraiensis Nakai flowers by 1.4 times as compared with the control (distilled water). Holding solution of 3% sucrose + $200mg{\cdot}L^{-1}$ HQC + $50mg{\cdot}L^{-1}\;AgNO_3$ + $50mg{\cdot}L^{-1}$ BA and 3% sucrose + $200mg{\cdot}L^{-1}$ HQC + $50mg{\cdot}L^{-1}\;AgNO_3$ + $150mg{\cdot}L^{-1}\;GA_3$ extended vase life of cut Aster koraiensis Nakai flowers by1.6 and 1.7 times as compared with control (distilled water). Aster koraiensis Nakai.flowers held in this preservative solution increased fresh weight and were maintained positive water balance for a long vase period. It was suggested that the vase life of cut Aster koraiensis Nakai flowers was closely related to fresh weight and water balance of the cut flower.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.172-177
• /
• 2011

This study was conducted to establish the optimal condition for in vitro propagation of wild Cynanchum wilfordii. The highest in vitro seed germination rate of 91.6% was obtained from the seed treated with gibberellic acid ($GA_{3}$) (100 ppm) for 24 hours followed by cultured on Woody Plant Medium (WPM) media supplemented with 1.0 mg/L 6-benzyl adenine (BA). The best shoot height obtained (5.2 cm) in medium with 1.0 mg/L $GA_{3}$, but the plants was grown abnormally and eventually died. The highest number (2.4) was shown when shoot were in cultured on the media including 0.1 mg/L BA after 4 weeks. Root induction from shoot obtained in vitro culture was effective on ventilation and without plant growth regulators (PGRs) and root length was highly developed (2 cm) at 0.1 mg/L naphthalene acetic acid (NAA). The highest survival rate (70%) was when plantlet grew pre-ventilation of in vitro condition.

• Proceedings of the Ginseng society Conference
• /
• 1984.09a
• /
• pp.1-11
• /
• 1984

Ginseng cotyledon calli were cultured on 1/2MS media supplemented with combination of various growth regulators to induce more embryoids and plantlets in a short period. And tissues of ginseng root and calli were also incubated under various factors or conditions to establish methods for the isolation of viable protoplasts in Panax ginseng C.A. Meyer. The calli derived from cotyledon produced numerous embryoids in 1/2MS media containing 0.5mg/$\ell$ 2,4-D and 0.5mg/$\ell$ kinetin after 2 months' culture. But only shoot formation was less frequent. Further development of these embryoids occurred on 1/2MS medium supplemented with the same concentration of BA and GA. Viable protoplasts were isolated from the root tissue and callus of ginseng. The specific conditions for the isolation of viable protoplasts were required of ginseng materials, root tissue and callus, being processed. For the production of viable protoplasts from 1-year old ginseng root tissue, an enzyme mixture of $2\%$ cellulase 'Ono-zuka' and $0.5\%$ macerozyme, an enzyme solution pH of 5.2 to 5.8, a 7- to 8- hour incubation period at $28{\pm}1^{\circ}C$, and 0.9M mannitol as osmoticum in the cell enzyme mixture were optimum, while the treatments with an enzyme mixture of $2\%$ cellulase 'Onozuka', $2\%$ macerozyme and $1\%$ driselase, and 25-hour incubation period at $28{\pm}1^{\circ}C$, were more efficient for the production of viable protoplasts from ginseng callus.

• Journal of Plant Biotechnology
• /
• v.7 no.3
• /
• pp.149-153
• /
• 2005

In the present study, in vitro multiple shoot induction was achieved from cotyledonary node and stem nodal explants of cv. NARI-6 of safflower (Carthamus tinctorius L.). Among various growth regulators tested, MS salts and B5 vitamins supplemented with BA (6-Benzy-laminopurine) $17.76\;{\mu}M$ and KN (Kinetin) $6.96\;{\mu}M$ phytohormonal combination was found to be the most effective in initiating numerous shoot buds after 30 days of culture than BA ($4.44-44.39\;{\mu}M$) or KN ($2.32-46.40\;{\mu}M$) alone in the medium. In addition, 0.8% (w/v) agar (Hi-media) and 3.0% sucrose (w/v) was the optimum level for the formation of adventitious shoots. Further results showed the maximum shoot elongation occurred on MS medium with BA ($8.88\;{\mu}M$) and $GA_3$($11.56\;{\mu}M$) combinations. Efficient rooting occurred on quarter strength MS medium with NAA $10.74\;{\mu}M$. The regenerated plantlets were acclimatized and successfully transferred to the field.