• Journal of Magnetics
• /
• v.14 no.4
• /
• pp.147-149
• /
• 2009

We report the exchange bias in antiferromagnet/ferrimagnet $Cr_2O_3/Fe_3O_4$ core/shell nanoparticles. The magnetic field hysteresis curve for $Cr_2O_3/Fe_3O_4$ nanoparticles after field-cooling (FC) clearly showed both horizontal ($H_{EB}{\sim}$610 Oe) and vertical (${\Delta}M{\sim}$5.6 emu/g) shifts at 5 K. These shifts disappeared as the temperature increased toward the Neel temperature of $Cr_2O_3\;(T_N{\sim}$307 K). The $H_{EB}\;and\;{\Delta}M$ values were sharply decreased between the $1^{st}\;and\;the\;2^{nd}$ magnetic field cycles, and then slowly decreased with further cycling. These results are discussed in terms of the formation of single domains with pinned, uncompensated, antiferromagnetic spin and their evolution into multi-domains with cycling.

• Particle and aerosol research
• /
• v.13 no.1
• /
• pp.33-40
• /
• 2017

Cobalt-iron oxides have emerged as alternative electrode materials for supercapacitors because they have advantages of low cost, natural abundance, and environmental friendliness. Graphene loaded with cobalt ferrite ($CoFe_2O_4$) nanoparticles can exhibit enhanced specific capacitance. In this study, we present three-dimensional (3D) crumpled graphene (CGR) decorated with $CoFe_2O_4$ nanoparticles. The $CoFe_2O_4$-graphene composites were synthesized from a colloidal mixture of GO, iron (III) chloride hexahydrate ($FeCl_3{\cdot}6H_2O$) and cobalt chloride hexahydrate ($CoCl_2{\cdot}6H_2O$) respectively, via one step aerosol spray pyrolysis. Size of $CoFe_2O_4$ nanoparticles was ranged from 5 nm to 10 nm when loaded onto 500 nm CGR. The electrochemical performance of the $CoFe_2O_4$-graphene composites was examined. The $CoFe_2O_4$-graphene composite electrode showed the specific capacitance of $253F\;g^{-1}$.

• Journal of the Korean Ceramic Society
• /
• v.47 no.4
• /
• pp.338-342
• /
• 2010

Co, $Fe_3O_4$ and Co/$Fe_3O_4$ nanoparticles were synthesized by a polyol process in order to develop their new applications and improve chemical, magnetic properties. The synthesis involved a polyol process using Fe, Co acetylacetonate as precursors and 1-2 hexadecanediol as the polyol. The synthesized $Fe_3O_4$ and Co/$Fe_3O_4$ nanocomposite particles were monodispersed and self arrayed ranging in size of 8~10 and 10~25 nm, respectively. The Co nanoparticle has a crystallite size of 10~40 nm. The synthesized nanoparticles were characterized by their structural, morphological, compositional and magnetic properties using TEM-EDS, XRD, and PPMS techniques.

• Journal of Powder Materials
• /
• v.14 no.4
• /
• pp.256-260
• /
• 2007

The surface of magnetite ($Fe_{3}O_{4}$) nanoparticles prepared by coprecipitation method was modified by carboxylic acid group of poly(3-thiophenacetic acid (3TA)) and meso-2,3-dimercaptosuccinic acid (DMSA). Then the lysozyme protein was immobilized on the carboxylic acid group of the modification of the magnetite nanoparticles. The magnetite nanoparticles are spherical and the particle size is approximately 10 nm. We measured quantitative dispersion state by dispersion stability analyzer for each $Fe_{3}O_{4}$ nanoparticles with and without surface modification. The concentration of lysozyme on the modified magnetite nanoparticles was also investigated by a UV-Vis spectrometer and compared to that of magnetite nanoparticles without surface modification. The functionalized magnetite particles had higher enzymatic capacity and dispersion stability than non-functionalized magnetite nanoparticles.

• Advances in nano research
• /
• v.9 no.1
• /
• pp.15-24
• /
• 2020

Iron has a crucial role in growth as part of metalo-proteins like haemoglobin or myoglobin, enzymes; they are also involved in energetic reactions. Iron plays a vital role in fertility. At high doses, Iron has a harmful consequence on the reproductive system, which can be strongly reflected the final stage of spermatogenesis. Nutritional products are claiming to use nanotechnology and it is important to recognize the potential toxicity of nano-sized nutrients. Recently iron nanoparticles were proposed as a food additive for poultry. The objective of this study was to investigate the effects of L-cystein coated iron oxide nanoparticles on reproductive performance in male quails. The results of Fourier Transform Infrared Spectrometer, Alternating Gradient Force Magnetometer and Scaning Electron Microscopy showed that iron oxide nanoparticles was produced and have been coated with L-cycstein (Fe₃O₄-Cys NPs). A total of 100 one-week-old quail chicks were randomly placed to five groups of five replicates. Four quails (two male and two females) were raised in an individual cage for each replicate. The five experimental treatment diets consisted; negative control diet, with no Iron supplementation; positive control diet supplemented with 60 mg/kg of Fe₃O₄; treatment diets supplemented with 0.6, 6 and 60 mg/kg of L-cystein coated iron oxide nanoparticles. The hemoglobin, Red blood cell, mean corpuscular volume, mean corpuscular hemoglobin, mean corpuscular hemoglobin concentration, gonadal somatic index, daily sperm production, total testicular sperm and sperm viability of the male quails that were fed with diet supplemented by 0.6 mg/kg of Fe₃O₄-Cys NPs were improved as compare with negative control. This study showed that not only the use of the Fe₃O₄-Cys nanoparticles had no side effects but also it can be used as a feed additive to improve the reproductive performance in male quails.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.8
• /
• pp.1545-1553
• /
• 2008

Using a one-pot reaction technique, monodisperse $\gamma-Fe_2O_3$ nanoparticles were prepared by thermal decomposition of Fe$(CO)_5$ in the presence of a long alkyl chain terminated dendron surfactant. The size of the particles is controlled by adjusting the concentration of the dendron ligands in the reaction solution. Spherical, 2 nm sized nanoparticles were obtained with a 3:1 ratio of dendrons to Fe$(CO)_5$, while 4.6 nm sized particles were formed with a 1:3 ratio. Superparamagetic properties of 2 nm, 4 nm, and 4.6 nm sized particles were measured using a SQUID magnetometer.

• Journal of Integrative Natural Science
• /
• v.1 no.3
• /
• pp.247-249
• /
• 2008

자성 결정체인 $Fe_3O_4$ 나노 입자를 합성하기위하여 강한 극성 용매인 2-pyrrolidone을 연전도 반응매개체로 하여 용액 내에 $FeCl_3{\cdot}6H_2O$을 용해시켜 2-pyrrolidone의 비등점까지 나노 결정체 고온 열분해 방법을 이용하여 제조되었다. 고온 열분해 후, $Fe_3O_4$ 나노 입자는 methanol/diethyl ether (1:3)에 의해서 침전되어졌다. 합성된 $Fe_3O_4$ 나노 입자는 고결정도, 고자기성을 가지고 있으며, 수용성의 자성 나노 결정체이다. 합성된 $Fe_3O_4$ 나노 입자의 크기와 결정도는 transmission electron microscope (TEM, Tecnai F20)를 이용하여 특성 분석하였으며, area electron diffraction (SAED) pattern과 HRTEM을 이용하여 나노입자의 격자 패턴 (lattice fringes)을 확인하였다.

• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.385-391
• /
• 2015

In this paper, we propose a new method to infiltrate $Fe_3O_4$-nanoparticles into a porous silicon film and a monitoring technique to detect packing density of nanoparticles within the film. Recently, research to use porous silicon as a drug carrier or a new functional sensor material by infiltrating $Fe_3O_4$-nanoparticles has been extensively performed. However, it is still necessary to enhance the packing density and to develop a monitoring technique to detect the packing density in real time. In this light, we forcibly injected a nanoparticle solution into a rugate-structured free-standing porous silicon (FPS) film by applying a pressure difference between the two sides of the film. We found that the packing density by the pressure-infiltration method proposed in this paper is enhanced, relative to that by the previous diffusion method. Moreover, a continuous shift in wavelength of the rugate reflectance peak measured from the film surface was observed while the nanoparticle solution was being injected. By exploiting this phenomenon, we could qualitatively monitor the packing density of $Fe_3O_4$-nanoparticles within the FPS film with the injection volume of the nanoparticle solution.

• Advances in nano research
• /
• v.10 no.1
• /
• pp.71-76
• /
• 2021

Synthesis of nanoparticles using green technology using plants is gaining significant attention as it is an environmentally friendly substitute to conventional physical and chemical methods. The present study was focused on the chemical and green synthesis of Iron Oxide nanoparticles from ferric chloride. The green synthesis was achieved by utilizing the bio components of Hibiscus rosa-sinensis. The Fe3O4 nanoparticles with the size range of 87-400 nm were synthesized by wet chemical reduction technique which are unstable, prone to aggregation while in green synthesis the phytochemicals present in the leaf extract acts as the capping as well as the reducing agent thus the green synthesized iron (III) oxide nanoparticles were naturally stabilized, spherical shaped and are in the size range of 2-80 nm. The results of both the protocols are compared and presented briefly.

• Journal of the Korean Chemical Society
• /
• v.58 no.1
• /
• pp.100-104
• /
• 2014

Magnetite nanoparticles were prepared by co-precipitation method and then silica was coated onto the surface of $Fe_3O_4$ by hydrolysis of TEOS. The silica coated magnetite nanoparticles were characterized for its structural, microstructural, optical, vibrational and magnetic properties by X-ray diffraction analysis, Scanning electron microscopy, UV-visible spectroscopy, Infrared spectroscopy and Vibration sample magnetometer, respectively. XRD study confirmed the presence of $SiO_2$ on the surface of magnetite nanoparticles. SEM study indicated that with increase in TEOS content the particles become bigger and mono-disperse. It was also found that the silica coating prevents magnetic particles from aggregation and imparts excellent stability.