• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.935-941
• /
• 2006

In this paper, the dielectric and piezoelectric properties of $0.4Pb(Ni_{1/3}Nb_{2/3})O_3+0.6Pb(Zr_{405}Ti_{595})O_3+X\;wt%\;Fe_2O_3$ ceramics were investigated with the addition of $Fe_2O_3$ and sintering temperature. Dielectric constant and piezoelectric constant increased with amount of $Fe_2O_3$ to 0.25 wt% and then decreased the further addition of $Fe_2O_3$. It seems that $Fe_2O_3$ acts as a sintering aid at the sintering temperature of $1150^{\circ}C$. By the addition of $Fe_2O_3$., sintering temperature of the system was lowered from $1250^{\circ}C\;to\;1100^{\circ}C$. The piezoelectric properties showed the maximum value of ${\varepsilon}r=4669,\;d_{33}=810(10^{-12}m/V)$, kp = 77 %, Qm = 55, in $0.4Pb(Ni_{1/3}Nb_{2/3})O_3\;-0.6Pb(Zr_{0.405}Ti_{0.595})O_3+0.25wt%\;Fe_2O_3$ ceramics having composition near the morphotropic phase boundary. The composition may be appropriate for actuator materials because of high piezoelectric constant and electromechanical coupling factor.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.891-896
• /
• 1993

Pb(Fe1/2Nb1/2)O3 and (1-x)Pb(Fe1/2Nb1/2)O3-xPbTiO3 ceramics were prepared by the precalcination method. Their structural and dielectric properties were investigated. The amount of perovsikte phase was increased by the precalcination and the dielectric properties of ceramics were improved. Additions of PbTiO3 were found to increase the tetragonality (c/a) of crystal lattice and Tc. In the middle region of (1-x)Pb(Fe1/2Nb1/2)O3-xPbTiO3, duffuse phase transitions (DPT) were observed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.269-272
• /
• 1999

In this study, electrical properties and TCFr of Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$-Pb(Mn $_{1}$3/Nb$_{2}$3/)O$_3$-Pb(zr, Ti)O$_3$ composition ceramics were investigated wish the Zr/Ti ratio and the additions of Y2O3. and Fe$_2$O$_3$ Electromechanical coupling factor(Kp) showed the highest value of 0.555 in the Zr/Ti=0.50/0.50 ratio ,however, dielectric constant showed the highest value of 1,217 in the Zr/Ti = 0.49/0.51 ratio. Excellent TCFr vague of 421ppm/$^{\circ}C$] at-30~9O$^{\circ}C$ was appeared in the Zr/Ti=0.50/0.50 ratio and electro-mechanical coupling factor(Kp) , mechanical quility factor(Qm) and dielectric constant was 0.496, 1,286 and 1,085 ,respectively ,in the composition ceramics of lwt%Y$_2$O$_3$ and 0.3wt%Fe$_2$O$_3$.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.561-567
• /
• 2009

The Fe-ACF/$TiO_2$ composites were prepared by a sol-gel method and were characterized by nitrogen adsorption, Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and Energy Dispersive X-ray (EDX). The Fe-ACF/$TiO_2$ composites were developed for the decomposition of organic dyes by using a UV lamp. The decomposition effect was investigated under various conditions, such as three selected non-biodegradable organic dyes like Methylene Blue (MB), Methyl Orange (MO), Rhodamine B (Rh.B), and in the presence of Fe and hydrogen peroxide ($H_2O_2$). The photocatalytic activity was derived from possible combination effects, such as (1) adsorption of ACF, (2) generation of electron/hole by $TiO_2$, (3) photo-Fenton reaction of Fe, and (4) oxidation of $Fe^{2+}\;to\;Fe^{3+}\;by\;H_2O_2$.

• 한국결정성장학회지
• /
• 제22권1호
• /
• pp.57-63
• /
• 2012

$Al_2TiO_5$에 LAS(${\beta}$-spodumene)와 $Fe_2O_3$를 첨가하여 고상법으로 세라믹 소결체를 제조하였다. $Al_2TiO_5$에 첨가된 LAS는 액상을 형성하고, $Fe_2O_3$는 입자 성장을 억제시켜 소결체를 치밀화하였다. 첨가제의 양을 변화시켜 소결특성, 기계적 특성 및 열충격 특성에 대하여 조사하였다. $Fe_2O_3$가 20 wt% 첨가된 LAS를 $Al_2TiO_5$에 20 wt% 첨가하였을 때, 꺽임 강도는 120 MPa 이상이었고, 열충격에 대한 저항성은 $1200^{\circ}C$ 이상으로 우수함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.54-58
• /
• 1996

In this paper, the structure, dieletric and piezoelectric properties of Pb(Fe$_{\frac{1}{2}}$/Sb$_{\frac{1}{2}}$$O_3$+ Pb(Zr$_{0.52}$ Ti$_{0.48}$ )O$_3$system ceramics were investigated and the effects of donor Nb$^{+5}$ on these properties were characterized for the application of the actuator. In xPb(Fe$_{\frac{1}{2}}$Sb$_{\frac{1}{2}}$)O$_3$+ (1-x) Pb(Zr$_{0.52}$ Ti$_{0.48}$ )O$_3$system ceramics, tetragonality decreased as x and Nb$_2$O$_{5}$ wt% were increased. In 0.05Pb(Fe$_{\frac{1}{2}}$Sb$_{\frac{1}{2}$}$)O$_3$+ 0.95 Pb(Zr$_{0.52}$ Ti$_{0.48}$ )O$_3$system, grain size was smallest but showed best dielectric and piezoelectric properties. The specimen sintered at 120$0^{\circ}C$ in 0.05pb(Fe$_{\frac{1}{2}}$Sb$_{\frac{1}{2}}$ )O$_3$+ 0.95 Pb(Zr$_{0.52}$ Ti$_{0.48}$ )O$_3$+ Nb$_2$O$_{5}$ 0.6wt% exihibited best piezoeletric properties such as $K^{p}$ =64%, d$_{33}$ =490 [$\times$10$^{-12}$ C/N] and strain was 1320[$\times$10$^{-6}$ Δ$\ell$/$\ell$]at AC 6kV/cm

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.3011-3015
• /
• 2009

Structural and thermo-analytical studies were carried out to understand the phase formation kinetics of the single phase $Bi_5Ti_3FeO_{15}$ (BTFO) nanocrystals in $Bi_2O_3-Fe_2O_3-TiO_2$, during the polymerized complex (PC) synthesis method. The crystallization of Aurivillius phase $Bi_5Ti_3FeO_{15}$ layered perovskite was found to be initiated and achieved under the temperature conditions in the range of ${\sim}$800 to 1050$^{\circ}C$. The activation energy for grain growth of $Bi_5Ti_3FeO_{15}$ nanocrystals (NCs) was very low in case of NCs formed by PC (2.61 kJ/mol) than that formed by the solid state reaction (SSR) method (10.9 kJ/mol). The energy involved in the phase transformation of Aurivillius phase $Bi_5Ti_3FeO_{15}$ from $Bi_2O_3-Fe_2O_3-TiO_2$ system was ${\sim}$ 69.8 kJ/mol. The formation kinetics study of $Bi_5Ti_3FeO_{15}$ synthesized by SSR and PC methods would not only render a large impact in the nanocrystalline material development but also in achieving highly efficient visible photocatalysts.

• 센서학회지
• /
• 제18권6호
• /
• pp.456-461
• /
• 2009

Perovskite-structure $Sr(Ti_{1-x}Fe_x)O_3$ thick films, in which x is 0.4 or 0.6, were prepared by normal ceramic process on alumina substrate. Electrical resistance was measured as a function of thermal treatment condition including atmosphere, time, and temperature. The resistance of $Sr(Ti_{1-x}Fe_x)O_3$ films is lower than those of $SrTiO_3$ or $SrFeO_3$ films. The temperature coefficient of resistance over $550^{\circ}C$ was measured to be 0 for the $Sr(Ti_{1-x}Fe_x)O_3$ films after thermal treatment at $1100^{\circ}C$ in air. The sensing property of the films was also measured as a function of temperature and gas such as $O_2$, CO, $CO_2$, NO and $NO_2$. $Sr(Ti_{1-x}Fe_x)O_3$ films showed a good sensing property for $O_2$, but no sensing signal for CO, $CO_2$, NO and $NO_2$.

• 한국표면공학회지
• /
• 제33권4호
• /
• pp.281-288
• /
• 2000

To understand the effect of Fe on the oxidation behavior of TiAl alloys, TiAl-(2, 4, 6at% )Fe were oxidized at 800 and 90$0^{\circ}C$ in air. The oxidation resistance of TiAl-Fe alloys increased with increasing an iron content. The scales formed consisted of an outer $TiO_2$ layer, an intermediate $A1_2$$O_3$ layer, and an inner mixed ($TiO_2$+$A1_2$$O_3$) layer, being similar to other common TiAl alloys. But, the scales formed on TiAl-Fe alloys were generally thin compared to those formed on pure TiAl, and contained dissolved iron. Below the oxide scale, an oxygen affected zone was formed. This beneficial effects of Fe on increasing the oxidation resistance and scale adherence of TiAl alloys were attributed to the refinement of oxide grains, increased scale adherence and the enhanced alumina-forming tendency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.297-299
• /
• 1999

Effects of additives on the ceramic and electrical properties of Pb(Y$_{1}$2/Ta$_{1}$2/)O$_3$-PbZrO$_3$-PbTiO$_3$ceramics in a perovskite type structure were investigated. The dielectric and piezoelectric properties of the base composition were improved markedly through selection of Fe$_2$O$_3$ additives in proper amounts. The composition Pb(Y$_{1}$2/Ta$_{1}$2/)O$_3$-PbZrO$_3$-PbTiO$_3$ obtained the dielectric constant ($\varepsilon$$_{r}$=1,425). Also, electromechanical couping factors for planar(k$_{p}$) and piezoelectric constant(d$_{33}$) were obtained 0.50 and 294[pC/N] at the additives 0wt% Fe$_2$O$_3$ respectively. The mechanical quality facor(Q$_{m}$) of Pb(Y$_{1}$2/Ta$_{1}$2/)O$_3$-PbZrO$_3$-PbTiO$_3$+Fe$_2$O$_3$(0.3 wt%) is about 510.510.510.