• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.23-25
• /
• 2002

This study was conducted to understand characteristics of wastewater which is discharged from small-scale dyehouse located in Seoul downtown area and to Find the appliable treatment method on the spot. The results of this study were summarized as followings. 1. The method which is used at present is mostly flocculation by coagulant or fenton oxidation. But the treatment efficiency of them are not good. 2. The results of fenton oxidation experiment demonstrated that treatment efficiency of COD was limited, which showed the need of the additional process or the improvement of existing treatment method, while the color was reduced considerably in optimal condition. 3. The optimal condition of fenton oxidation are as followings. -Feasible pH was in the 3∼4 regardless of the kinds of iron ions, But the fluctuation of treatment efficiency with the change of pH was small - The mass ratio of H$_2$O/CODcr was used to evaluate the parameter of H$_2$O$_2$ The optimal range of this was in 0.7∼1,3 and it was observed that the ratio got higher as the quality got worse. -For iron ion, FeCl$_2$4H$_2$O turned out to be more effective for removal of color compared with was compared FeSO$_4$7H$_2$Oin. the mass ratio of Fe/H$_2$O$_2$ of 2.3∼2.8 for of FeSO$_4$7H$_2$O and 1.6∼1.8 for FeCl$_2$4H$_2$O resulted in good treatment efficiencies. 4. With adsorption process applied before fenton oxidation in order to treat the high concentration wastewater, the treatment efficiency increased by 61％ in CODcr, 55％ in color. and if the power activated carbon is injected in more than 2500mg/$\ell$, the wastewater can be treated within the effluent quality criteria.

• Journal of Animal Science and Technology
• /
• v.61 no.4
• /
• pp.216-224
• /
• 2019

This study was conducted to investigate the effects of hot melt extrusion (HME) nano-iron as an alternative for the common ferrous sulfate on iron (Fe) bioavailability, growth performance, nutrient digestibility, intestinal morphology, and intestinal microbiota of weanling pigs. A total of 200 piglets (Landrace ${\times}$ Yorkshire ${\times}$ Duroc) were randomly allotted to seven treatments on the basis of initial body weight (BW) and sex. Treatments were the INO100 (100 ppm Fe as $FeSO_4$), HME-Fe levels (50, 75, and 100 ppm nano-Fe as $FeSO_4$). ORG100 (100 ppm Fe as iron methionine). In phase 1, the HME50 pigs showed the lowest Fe content in feed and feces. Plasma Fe concentration was increased in HME100 and ORG100 pigs. In phase 2, there were significantly lower concentration of Fe in feed and feces of HME50 pigs (p < 0.01). A lower Fe concentration in the plasma and liver were observed in HME50 pigs compared with HME100 pigs. Concentration of red blood cell (RBC) was the lowest (p < 0.01) for HME50 pigs. During phase 2, the HME100, HME75, and ORG100 pigs showed a higher RBC and hemoglobin values compared with HME50 pigs. Digestibility of gross energy (GE) and crude protein (CP) were significantly higher in HME100 pigs compared with HME50 pigs. There was an increased (p < 0.01) villus height in the duodenum and jejunum of HME100 pigs compared with HME50 pigs. It is concluded that dietary Fe does not improve growth performance of weanling pigs; however, increasing the dietary iron concentration in weanling piglets increased the RBC and hemoglobin. In addition, the potential ability of HME to be used at a lower level (HME75) was observed.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.5
• /
• pp.470-477
• /
• 1999

The purpose of this study was to choose prinicipal food components contained in diet foods and food additives used for manufacturing processed foods and elucidate their in vivo effects on the growth pattern of Helicobacter pylori. To do this the antibacterial effects of various sources of carbon nitrogen and mineral as an effect agent on Helicobacter pylori were first assessed based upon bacterial growth degree. results show that the source of carbon tested had different effects on bacterial growth of Helicobacter pylori. It was revealed that a promotional effect of monosaccharides resulted in enhanced growth of Helicobacter pylori compared with disaccharides and polysacchrides, in particular glucose was observed to be most effective in growth of Helicobacter pylori among monosaccharides teste whereas mannose to hinder the growth of Helicobacter pylori. Polyols such as sorbitol mannitol maltitol and xylitol was however observed to show no promotion or suppression effect on growth of Helicobacter pylori. Apart from these the sources of amino acid and inorganic nitrogen were chosen and tested to assess the promotion or suppression effect of nitrogen sources on growth of helicobacter pylori. It was found that amino acid such as lysine showed its promotion effect on the growth of Helicobacter pylori while arginine (NH4)2SO4 and NH4Cl showed no effect on its growth. Ammoia and urea were however observed to have a positive effect on the growth of Helicobacter pylori. Among these effect agents lysine and methionine were revealed to show the most positive effect on growth of Helicobacter pylori. Minerals such as MgSO4 KH2PO4 and MgCl2 appered to exert their positive growth effects whereas CaCl2 and CaSo4 had a little effect. In addition FeSO4 FeCl2 and FeCl3 brought suppression on the growth of helicobacter pylori. In studies of the growth of Helicobacter pylori by food additives ascorbic acid showed extreme suppression on its growth,. Sodium nitrate and sodium chloride were also found to be of negative effect on the growth of Helicobacter pylori in rder of degree whereas tocopherol had nothing to do with microbial growth.

• The Korean Journal of Mycology
• /
• v.19 no.3
• /
• pp.220-225
• /
• 1991

Activities of the $F_1-ATPase$ purified from Lentinus edodes were stimulated by $Fe^{3+},\;Fe^{2+},\;Cd^{2+},\;Mg^{2+},\;K^{+}\;and\;Co^{2+}$ but were inhibited by $Zn^{2+},\;Ca^{2+},\;Cu^{2+}\;and\;Ni{2+}$ ion. The enzyme activities were increased 130, 65, 65, 68, 105% and 23% by the 5mM $Fe^{3+}$, 10 mM$Fe^{2+}$, 1mM $Cd^{2+}$, 5mM $Mg^{2+}$, 5mM $K^{+}$ and 5mM$Co^{2+}$ ion addition, respectively, as compared with those not added. The enzyme activities were decreased 18, 19, 27 and 30% by 10 mM $Zn^{2+}$, 10mM $Ca^{2+}$, 0.5 mM $Cu^{2+}$ and 10 mM $Ni^{2+}$ ion, respectively. Anion effects of 10 mM ${Co_3}^{2-}$, 20 mM,$CN^{-}$ 20 mM$CH_3COO^{-}$ and 20 mM ${NO_3}^{-}$ ion were inhibited to the enzyme activities of 98, 95, 70 and 50%, respectively. As increasing of ${SO_4}^{2-}$ ion concentration, the enzyme activity was stimulated and 20 mM ${SO_4}^{2-}$ ion was shown increased of 21%.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.263-271
• /
• 2014

The purpose of this study is to investigate the dyeability of silk fabrics with Humulus japonicus (Hwansam) extract which is a kind of weeds that grows wild in the suburbs. In the research, the general extract method was conducted with the extract from fresh herb of root-removed Humulus japonicus while we investigated the optimal dyeing conditions and dyeability depending on the changes of the kind of mordants, methods and temperature. The functional properties such as antibacterial activities, deodorization and UV protection were also reviewed. The ideal output, as a result, was shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 40 minutes of dyeing time while in terms of dye uptake depending on the kind of mordants and methods, it was found that among four mordants of $SnCl_2$, $AlK(SO_4)_2$, $CuSO_4$, and $FeSO_4$ post-mordanting with $FeSO_4$ showed the best result. Color fastness to washing, dry cleaning and rubbing was found strong at grade 4-5 and the grade to light was as good as 3 while to perspiration was good at 4-5 as well. In aspects of functional properties, it showed excellent results of 99% deodorization rate, 98% UV protection rate and 99.9% bacterial reduction against Staphylococcus aureus.

• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.713-718
• /
• 2015

A new method is proposed for the calculation of the unrelaxed surface energy of spinel ferrite. The surface energy calculation consists of (1) setting the central and computational domains in the semi-infinite real lattice, having a specific surface, and having an infinite real lattice; (2) calculation of the lattice energies produced by the associated portion of each ion in the relative domain; and (3) dividing the difference between the semi-infinite lattice energy and the infinite lattice energy on the exposed surface area in the central domain. The surface energy was found to converge with a slight expansion of the domain in the real lattice. This method is superior to any other so far reported due to its simple concept and reduced computing burden. The unrelaxed surface energies of the (100), (110), and (111) of $ZnFe_2O_4$ and $Fe_3O_4$ were evaluated by using in the semi-infinite real lattices containing only one surface. For the normal spinel $ZnFe_2O_4$, the(100), which consisted of tetrahedral coordinated $Zn^{2+}$ was electrostatically the most stable surface. But, for the inverses pinel $Fe_3O_4$, the(111), which consisted of tetrahedral coordinated $Fe^{3+}$ and octahedral coordinated $Fe^{2+}$ was electrostatically the most stable surface.

• Korean Journal of Materials Research
• /
• v.16 no.11
• /
• pp.687-691
• /
• 2006

Synthesis of Iron oxides by air oxidation of $FeSO_4$ solutions in the presence of NaOH, Diethylenetriamine (DETA), Butylamine (BA) and influence of ultrasonic wave were investigated by XRD, SEM and particle size analyzer. As the DETA addition increased to 0.05 mol, $Fe_3O_4$ was formed with goethite($\alpha$- FeOOH) and $Fe_3O_4$ single phase was formed above 0.18mol of DETA. As the BA addition increased, the XRD peak intensity of (020) face of lepidocrocite($\gamma$-FeOOH) was developed until the formation of $Fe_3O_4$ and reduced the size of the iron oxide particles formed. Ultrasonic wave reduced the size of the iron oxide particles but gave little effects on the iron oxide particles synthesized by amine.

• Economic and Environmental Geology
• /
• v.35 no.1
• /
• pp.55-66
• /
• 2002

There are several abandoned coal mines around Donghae mine area in the Taebaek coal field. Two major creeks, Soro and Sanae, are contaminated with the colored precipitates formed from the coal mine drainages. Bed rocks of the study area consist of limestone, shale, and sandstone. Limestone consisted mainly of calcite and dolomite, and shale of quartz, pyropyllite and chlorite, and sandstone of quatz and illite. Coal coal spoil dumps composed mainly of pyrite and chlorite. The oxidative dissolution of sulfide minerals leads to acid mine drainage and adds the metal ions in the stream water. The ion concentrations of Fe, Ca, Mg, Al, Si, SO$_{4}$in the stream polluted by AMD are generally higher than those in the unpolluted stream water. High concentrations of Ca and Mg, Al and Si can be resulted from dissolution of carbonate minerals such as calcite, dolomite and aluminosilicates such as chlorite, pyrophyllite. Although the Fe, Al, Si, SO$_{4}$ contents are considerbly high in the acid water released from the mine adits, they become decreased downstream due to dilution of unpolluted water and precipitation of oxide/hydroxide and sulfate minerals on the bottom of stream.

• Journal of Korean Society on Water Environment
• /
• v.26 no.5
• /
• pp.725-731
• /
• 2010

This study was to evaluate the ozone oxidation of dissolved Fe, Mn, $SO{_4}^{2-}$ ions and color in abandoned mining drainage by conducting a bench-scale operation at various reaction times in an ozone reactor. The influent was collected from an abandoned mine drainage (AMD) near the J Mine in Jungsungun, Kangwon Province. The ozone reactor was operated at ozone reaction times of 10, 20 and 30 min with ozone doses of 0.0 and $2.4g\;O_3/hr$. Samples from each effluent from subsequent sand filtration were regularly collected and analyzed for pH, Fe, Mn, Al, Cr, Hg, $SO{_4}^{2-}$, alkalinity, color, ORP, TDS and EC. The effluent concentrations of Fe and Mn from the sand filter were less than 0.1 mg/L, which were below the concentrations on Korean drinking water quality standards (Fe, Mn < 0.30 mg/L). The influent $SO{_4}^{2-}$, concentrations were not noticeably changed during this ozone oxidation. Cr and Hg in the raw wastewater from the abandoned mining drainage were not detected in this study. The experimental result shows that the ozone oxidation of dissolved heavy metals and subsequent sand filtration of metal precipitates are desirable alternative for removing heavy metals in AMD.

• Corrosion Science and Technology
• /
• v.22 no.2
• /
• pp.90-98
• /
• 2023

In this study, cobalt oxide (Co₃O₄) and cobalt-doped magnetite (CoFe₂O₄) nanoparticles were synthesized by a hydrothermal method. They were then used as corrosion inhibitors for corrosion protection of AA2024-T3 aluminum alloys. These obtained nanoparticles were characterized by x-ray diffraction, field-emission scanning electron microscopy, and Zeta potential measurements. Corrosion inhibition activities of Co₃O₄ and CoFe₂O₄ nanoparticles were determined by performing electrochemical measurements for bare AA2024-T3 aluminum alloys in 0.05 M NaCl + 0.1 M Na₂SO₄ solution containing Co₃O₄ or CoFe₂O₄ nanoparticles. Corrosion protection for AA2024-T3 aluminum alloys by a water-based epoxy with or without the synthesized Co₃O₄ or CoFe₂O₄ nanoparticles was investigated by electrochemical impedance spectroscopy during immersion in 0.1 M NaCl solution. The corrosion protection of epoxy coating deposited on the AA2024-T3 surface was improved by incorporating Co₃O₄ or CoFe₂O₄ nanoparticles in the coating. The corrosion protection performance of the epoxy coating containing CoFe₂O₄ was higher than that of the epoxy coating containing Co₃O₄.