• Applied Biological Chemistry
• /
• v.18 no.1
• /
• pp.42-51
• /
• 1975

Penicillium sp I which produces a powerful hydrolysing enzyme was isolated from putrefid and dry Jerusalem artichoke medium. The strain was used to study on the optimum culture conditions for enzyme production. The results obtained are as follows: 1. Penicillium sp I was a vigorous strain to produce inulase. 2. The optimum culture conditions of the strain was examined in the Jerusalem artichoke extract medium and the synthetic medium. 3. Inulase productivity in the Jerusalem artichoke extract medium was higher than that of the synthetic medium. 4. The optimum culture period of the Jerusalem artichoke extract medium was four days, whereas that of the synthetic medium was five days. 5. The optimum temperature, pH and concentration in the Jerusalem artichoke extract medium were $30^{\circ}C$, 5.0 and 4.0% (W/V), respectively. Meanwhile, the optimum temperature, pH and concentration in the synthetic medium were $30{\sim}33^{\circ}C$, $5.0{\sim}6.0$, and $1.0{\sim}1.5%$ (W/V), respectively. 6. Corn steep liquor, peptone, $(NH_4)_2HPO_4,\;NH_4H_2PO_4,\;(NH_4)_2SO_4$, etc. were favorable as nitrogen sources. Of these, especially, Corn steep liquor and peptone as organic nitrogen sources caused an increase in inulase production in the synthetic medium. 7. All sugars except for inulin have no effect upon the inulase production. 8. KCl, $MgSO_4\;and\;FeSO_4$ were favourable mineral sources for inulase production.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.2085-2095
• /
• 2000

Red mud is generated as a by-product during the production of aluminum hydroxide from bauxite ore. In this study inorganic coagulants were prepared by leaching aluminum and iron from red mud with acids under various operating conditions. The optimum leaching efficiency of Al and Fe was obtained by contacting red mud with acids of 5M $H_2SO_4$ and 9M HCI with the ratio of 1/10(g/mL) at $85^{\circ}C$ and $25^{\circ}C$, respectively. In addition. the removal experiments of heavy metal ions($Pb^{2+}$, $Cd^{2+}$, $Cu^{2+}$, $Zn^{2+}$, $Cr^{3+}$), turbidity and phosphate phosphorus($PO_4{^{3-}}-P$) in aqueous solutions were also studied in various experimental conditions. As a result, the developed coagulants are found to show a good removal performance of heavy metal ions. turbidity and phosphate phosphorus in aqueous solutions.

• Korean Journal of Pharmacognosy
• /
• v.17 no.1
• /
• pp.23-34
• /
• 1986

To find antitumor components of Lyophyllum decastes, the mycelia of L. decastes were cultured in artificial media and a new antitumor component which showed potent antitumor activity against sarcoma 180 implanted in mice, was isolated and named 'Lyophyllan A'. Lyophyllan A was composed of a polysaccharide moiety (86%) and a protein moiety (2%). The polysaccharide moiety was found to be a heteroglycan which consisted of glucose (48.1%), mannose (30.8%), galactose, xylose and fucose. The protein moiety contained 18 amino acids. Cultural characteristics of L. decastes were investigated by shake culture method. The best result was obtained when L. decastes was cultured in medium glucose 50g, peptone 10g, corn steep liquor 30ml, $KH_2PO_4$ 0.87g, $MgSO_4$ $7H_2O$ 0.5g, $CaCl_2$ 0.3g, $FeSO_4{\cdot}7H_2O$ 10mg, $MnCl_2{\cdot}4H_2O$ 7mg, $ZnSO_4{\cdot}7H_2O$ 4mg and $CuSO_4{\cdot}5H_2O$ 1mg per one liter at $26^{circ}C$, 180rpm, for 9 days.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.74-74
• /
• 2018

Ti-6Al-4V alloys have been widely used as orthopedic materials because of their excellent corrosion resistance and mechanical properties. However, it does not bind directly to the bone, so it requires a surface modification. This problem can be solved by nanotube and micropore formation. Plasma electrolytic oxidation (PEO) treatment for micropore, which combines high-voltage spark and electrochemical oxidation, is a new way of forming a ceramic coating on light metals such as titanium and its alloys. This method has excellent reproducibility and can easily control the shape and size of the Ti alloy. In this study, formation of bioactive surface by PEO-treatment after $2^{nd}$ ATO technique of Ti-6Al-4V alloy was invesgated by various instrument. Nanotube oxide surface structure was formed on the surface by anodic oxidation treatment in 0.8 wt.% NaF and 1M $H_3PO_4$ electrolytes. After nanotube formation, nanotube layer was removed by ultrasonic cleaning. PEO-treatment was carried out at 280V for 3 minutes in the electrolytic solution containing the bioactive substance (Mg, Zn, Mn, Sr, and Si). The surface of Ti-6Al-4V alloy was observed by field emission scanning electron microscopy (FE-SEM, S-4800 Hitachi, Japan). An energy dispersive X-ray spectrometer (EDS, Inca program, Oxford, UK) was used to analyze the spectra of physiologically active Si, Mn, Mg, Zn, and Sr ions. The PEO film formed on the Ti-6Al-4V alloy surface was characterized using an X-ray diffractometer (TF-XRD, X'pert Philips, Netherlands). It is confirmed that bioactive ions play an essential role in the normal bone growth and metabolism of the human skeletal tissues.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.02a
• /
• pp.14-28
• /
• 2001

As basic study for purpose bioremedation in oil-contaminated environment, Primarily, we isolated biosurfactant producer- strains utilized of oil-agar plate, and measured surface tension and emulsifying activity. We investigated in oil-contaminated soil and sea water. In this laboratory, Pseudomonas sp. EL-012S strain isolated from oil-contaminated soil was able to product novel biosurfactant under the optimal culture condition. Its condition was n-hexadecane 2.0%, NH$_4$NO$_3$0.4%, Na$_2$HPO$_4$0.6%, KH$_2$PO$_4$0.4%, MgSO$_4$.7$H_2O$ 0.02%, CaCl$_2$.2$H_2O$ 0.001%, FeSO.7$H_2O$ 0.001%, initial pH 7.0 and aeration at 3$0^{\circ}C$, respectively. This biosurfactant was produced in both late-exponential and early-stationary phase. The biosurfactant from Pseudomonas sp. EL-012S was composed of carbohydrate, lipid and protein. The purified-biosurfactant was examined two (biosurfactant type I, II) with the silica gel G60 column chromatography and the purified biosurfactant confirmed thin layer chromatography, high performed liquid chromatography and gas chromatography. The biosurfactant type I involved in carbohydrate-lipid-protein characteristics lowered surface tension of water to 27dyne/cm and interfacial tension 4.5dyne/cm aginst to n-hexadecane and the biosurfactant type B involved in carbohydrate lipid characteristics lowered surface tension of water to 30dyne/cm and interfacial tension 8dyne/cm against to n-hexadecane. Specially type I had the properties such as strong emulsifying activity, emulsion stability, pH-stability, thermo-stability, high cleaning activity and forming ability.

• Journal of Powder Materials
• /
• v.30 no.6
• /
• pp.516-520
• /
• 2023

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO₄ is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO₄O has two redox reactions (V⁵⁺/V⁴⁺/V³⁺) but low electrochemical activity. In this study, LiVPO₄O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO₄O_1-xF_x, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.766-774
• /
• 2000

The major and trace constituents of Mongolian chromite were analyzed by ICP-AES. The dissolution procedures, mixed acid ($HClO_4+H_3PO_4$) digestion and fusion with $Na_2O_2$ flux, have been studied to dissolve the chromite. The optimum dissolution method was found to be a fusion with $Na_2O_2$ flux. The effect of large amount of Na on major and trace constituents was examined when these elements were determined by ICP-AES. There was no effect on major elements at a concentration of Na 250 mg/L solution. The emission intensity of trace constituents containing Na 1,250 mg/L decreased to 1.0-5.2% according to elements and wavelengths. The result of this method was compared with that of neutron activation analysis (NAA) to confirm the accuracy of this procedure. The results between two methods were in a good agreement within less than 5% for $Al_2O_3$, $Cr_2O_3$, MgO and -20 to 8% for Co, Mn, V, Zn, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.155-155
• /
• 2017

Surface modifications are commonly utilized to adjust the properties of the titanium and its alloy surface to the specific needs of the medical applications, but there are disadvantages such as poor osteoconductive properties and low adhesion of bone cell to implant surface. In order to improve these disadvantages, changes in surface properties have an important effect on osseointegration during implantation. In this paper we applied new technological method for improving a unique surface modification using the characteristic of an electrolytic Solution. Thus, in the electrolyte containing NaF in Na2SO4, TiO2 nanoporous was uniformly formed, and HAp nanoparticles were electrodeposited around the TiO2 nanopores, but in the electrolyte containing NH4F in (NH4)H2PO4, the coarse protrusions including HAp nano particles were regularly deposited onto the TiO2 barrier layer. The surface characteristics and the distributed elements and have been investigated by EDS analysis, and ultra-fine structure of surface are carried out using FE-SEM. To investigate the behavior of the anion, the analysis of chemical states was performed by XPS, and the narrow spectrums for Ti2P, Ca 2p, and P 2p seems to be almost similar depending on the characteristics of the electrolyte solution respectively. In addition, Ca 2p spectrum could be resolved into two peaks for Ca 2p3/2 and 2p1/2 at 347.4 and 351.3 eV, which are related to hydroxyapatite. And, the P peak can also be deconvoluted into two peaks for P1/2 and P3/2 levels with binding energy 134.2 and 133.4 eV, respectively. From the result of soaking test, the apatite morphologys were well-formed onto the modified surface according to the different conditions.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.1
• /
• pp.22-30
• /
• 1982

Water quality of downstream of the Nagdong river, using for agricultural irrigation of the Gimhae plain, were observed. Water temperature, turbidity, residue, pH, BOD, COD, DO, hardness, chloride, sulphate, phosphate, inorganic nitrogenous compounds, sodium, general bacteria, E. coli and heavy metals of the water were investigated at Daejeo, Sikman, Bongrim, Noksan, Machal and Jangyou pumping stations in the Gimhae plain in May, July and October, 1981. The results obtained were as follows; 1) Average value of analyzed components of the water at all sampling sites were 7.8 pH, 6.3 ppm BOD, 6.5 ppm COD, 6.4 ppm DO, 231 ppm hardness, 582 ppm Cl-, 412 ppm $SO_4--$, 2.32 ppm $PO_4---$, 3.8 ppm $NH_4+,\;478\;ppm\;Na+$, 2964 No. /100 ml total coliform, 0.0040 ppm Cd, 0.0066 ppm Pb, respectively. 2) The most heavily polluted site of all investigated ones was Sikman. It seemed to be caused by the vast quantity of wastewater discharged from industrial district in Gimhae city. The next polluted sites were Bongrim, Daejeo and Noksan, and comparatively less polluted sites were Machal and Jangyou, judging from both appearance and physicochemical observation. 3) At Sikman, the most heavily polluted site, average value of components were 8.0 pH, 8.1 ppm BOD, 8.2 ppm COD. These values were close to the limit point of agricultural water quality standard of 8.0 ppm BOD (COD). 4) Any apparent variation was not observed by the sampling season in most components except DO and $NH_4+$. DO of October was higher than that of May or July but $NH_4+$ was low. 5) $NH_4+$ content was comparatively high in downstream of the Nagdong river of which water is used as the agricultural irrigation in the Gimhae plain. Therefore, fertilizer application on the farming land must make account of nitrogen content of the irrigation water 6) It was considered that chloride and sodium contents would not influence the crop cultivation in common season, but in dry season irrigation must be done carefully.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.3
• /
• pp.259-263
• /
• 1997

To investigate chemical changes of agricultural water in Nam river used for the basic information. Samples were collected from seven sites along the Nam river and were analyzed for inorganic content from April to September in $1994{\sim}1995$. Average value of analyzed inorganic concentrations at seven sampling sites were pH 7.9, COD 7.3mg/l, $NO_3-N$ 1.2mg/l, $Na^+$ 6.2mg/l, $Cl^-$ 14.8mg/l, EC 0.13dS/m, $PO_4\;^{3-}$ 0.21mg/l, $K^+$ 2.6mg/l, $Ca^{2+}$ 10.8mg/l,$Mg^{2+}$ 2.9mg/l, $SO_4\;^{2-}$ 10.5mg/l, $Fe^{3+}$ and $Zn^{2+}$ 0.02mg/l. The monthly average value of COD, $NO_3-N$, $Na^+$ and $Cl^-$ showed highest peak in July $8.4{\sim}11.6$, $1.1{\sim}1.7$, $5.4{\sim}13.1$ $18.9{\sim}27.9mg/l$. The highest region of average COD, $NO_3-N$, $Na^+$ and $Cl^-$ were Weola pumping station, $8.8{\sim}11.3$, $1.6{\sim}2.4$, $9.0{\sim}10.2$ and $21.7{\sim}23.0mg/l.$ The ionic $copmposition({\Sigma}A/{\Sigma}C)$ : ratio between total equivalant of anions and canon) of Nam river was higher at Weola pumping station than other topography. The EC was positively correlated with $K^+$, $Ca^{2+}$, $Mg^{2+}$, $Na^+$, $Cl^-$ and $SO_4\;^{2-}$.