• Bulletin of the Korean Chemical Society
• /
• 제5권1호
• /
• pp.41-44
• /
• 1984

The oxidation of carbon monoxide has been investigated on Ni-doped ${\alpha}-Fe_2O_3$ catalyst at 300 to $450^{\circ}$. The oxidation rates have been correlated with 1.5-order kinetics; first with respect to CO and 1/2 with respect to $O_2$. Carbon monoxide is adsorbed on lattice oxygen of Ni-doped ${\alpha}-Fe_2O_3$, while oxygen appears to be adsorbed on oxygen vacancy formed by Ni-doping. The conductivities show that adsorption of CO on O-lattice produces conduction electron and adsorption of $O_2$ on O-vacancy withdraws the conduction electron from vacancy. The adsorption process of CO on O-lattice is rate-determining step and dominant defect of Ni-doped ${\alpha}-Fe_2O_3$ is suggested from the agreement between kinetic and conductivity data.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 1999년도 추계학술발표대회 논문개요집
• /
• pp.5-6
• /
• 1999

• 한국세라믹학회지
• /
• 제13권4호
• /
• pp.5-8
• /
• 1976

Both oriented and non-oriented ferroxplana $Co_{1-x}Zn_xZ(Ba_3Co_{2(1-x)}Zn_{2x} Fe_{24}O_{41})$ with x=0.00, 0.45 were prepared by conventional ceramic method. The magnetostrictions of thus prepared specimens were measured by use of the three terminal capacitor device at room temperature. The magnitude of measured values was approximately five times greater than that of ZnY ferroxplana. The easy-magnetization plane at room temperature of both CoZ and Co0.55 $Zn_{0.45}$Z was their basal plane. The magentostrictions in the basal plane and the other planes showed saturated values at magnetic field intensity of about 2Koe and 4Koe, respectively. The magnetostriction constants $K_1, \; K_2, \;K_3\; and\; K_4$ for CoZ were -2.4, -10.5, -5.9 and -45.2$\times10^{-6}$ , while those for $Co_{0.55}Zn_{0.45}Z$ were +0.1, -1.2, -6.3 and -39.0$\times$10^{-6}, , respectively.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.873-877
• /
• 2007

In order to apply a complex multilayer chip LC filter, this study has estimated the interfacial reaction and coupling properties of dielectric materials $Pb(Fe_{1/2}Nb_{1/2})O_3$ and Ni-Zn-Cu ferrite materials through low-temperature co-sintering (LTCS). PFN powders were fabricated using double calcinated at $700^{\circ}C$ and then $850^{\circ}C$. While the perovskite phase rate was found to be 91 %, after heat treatment at $900^{\circ}C$ for 6h, the perovskite phase rate and density exhibited a value of 100 % and 7.46$g/cm^3$, respectively. The PFN/Ni-Zn-Cu ferrite, PFN/CUO (or $Pb_2Fe_2O_5$) and ferrite/CuO (or $Pb_2Fe_2O_5$) were mechanically coupled through interfacial reactions after the specimen was co-sintered at $900^{\circ}C$ for 6 h. No intermediate layer exists for the mutual coupling reaction. This result indicates the possibility of low-temperature co-sintering without any interfacial reaction layer for a multilayer chip LC filter.

• Journal of Magnetics
• /
• 제19권3호
• /
• pp.227-231
• /
• 2014

We fabricated textured polycrystalline $CoFe_2O_4$ thin films on $Pt(111)/TiO_2/SiO_2/Si$ substrate through a sol-gel method. We varied the thickness of the films, by using precursor solutions with different concentrations of 0.1, 0.2, and 0.3 M, and by depositing 5, 8, or 10 layers on the substrate by spin-coating. X-ray diffraction spectra indicated that when the precursor concentration of the solution was higher than 0.1 M, the spin-coated films were preferentially oriented in the <111> direction. Inspection of the surface morphology by scanning electron microscopy revealed that $CoFe_2O_4$ thin films prepared with 0.2 M solution and 5-time spin-coatings had smoother surface, as compared to the other conditions. Each coating had an average thickness of about 50 nm. The magnetic properties measured by vibrating sample magnetometer showed magnetic anisotropy, as evidenced from the difference in the in-plane and out-of-plane hysteresis loops, which we attributed to the textured orientation of the $CoFe_2O_4$ thin films.

• Bulletin of the Korean Chemical Society
• /
• 제18권10호
• /
• pp.1105-1108
• /
• 1997

The new amorphous intermetallic compounds, M3(AsTe3)2: M=Cr, Co, Fe, were synthesized by the precipitation reaction of the Zintl anion AsTe33- with the divalent transition metal halides in aqueous solution and analyzed by EDS equipped with SEM and PIXE. The empirical formula of the specimens was found to be Fe3.0As1.8Te5.9, Co3.0As2.1Te6.5, and Cr3.0As2.0Te6.9 by the quantitative elemental analysis. The dc specific resistivity of the materials was measured as a function of temperature in the range from 20 to 300 K, in which their resistivity of Cr3(AsTe3)2 was largely dependent on temperature, while those of Co3(AsTe3)2 and Fe3(AsTe3)2 were only slightly dependent on temperature. To characterize the spin glass state of the specimens, the ac and dc magnetic susceptibility were measured and it was found that Co3(AsTe3)2 and Fe3(AsTe3)2 undergo a transition to a spin glass state at 6 K and 38 K, respectively. Magnetization data are reported as both thermal remanent magnetization (TRM) and isothermal remanent magnetization (IRM) as a function of magnetizing field and temperature.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.819-823
• /
• 1995

The oil-based magnetic fluids were sysnthesized using ultra-fine $Fe_{3}O_{4}$ powder dispersed in hydrocarbon oil. To synthesize ultra-fine $Fe_{3}O_{4}$, we carried out the experiments varying the pH of reacting medium and the initial concentration of $Fe^{2+}$. We also investigated the amount of oleic acid to obtain a stable dispersion and the proper base oil of MF for loudspeaker application. The limits of adsorbed amount of oleic acid on the $Fe_{3}O_{4}$ surface were approximately 35~40 percents of the total magnetite weight. As the $Fe_{3}O_{4}$ content increased from 0.1g/cc to 0.6g/cc, the viscosity of oil-based magnetic fluid increased from 1,063cP to 1,828cP, and its saturation magnetization at 10kOe increased from 66G to 242G. When we tested the MF sample to a commercial speaker, improvements were noted.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.308-314
• /
• 2015

The electrochemical performance and Cr poisoning behavior of $La_{1-x}Ba_xCo_{0.9}Fe_{0.1}O_{3-{\delta}}$ (LBCF, x = 0.3, 0.4, 0.5) and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LSCF) cathodes were investigated for solid oxide fuel cells (SOFCs). The polarization resistance of the LBCF/GDC/LBCF symmetrical cell was found to decrease with increasing Ba content (x value). This phenomenon might be associated with the high oxygen vacancy concentration in the LBCF sample, with x = 0.5. In addition, there was no chromium poisoning in the LBCF cathode. On the other hand, the polarization resistance of the LSCF cathode was found to significantly increase after exposure to gaseous chromium species; it appears that this result stemmed from the formation of $SrCrO_4$ phase. Therefore, it can be expected that LBCF can be a durable potential cathode material for intermediate-temperature solid oxide fuel cells (IT-SOFC).

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권7호
• /
• pp.1120-1126
• /
• 2007

An iron-fortified whey protein concentrate (Fe-WPC) was prepared by addition of ferric chloride to concentrated whey. A large part of the iron in the Fe-WPC existed as complexes with proteins such as ${\beta}$-lactoglobulin. The bioavailability of iron from Fe-WPC was evaluated using iron-deficient rats, in comparison with heme iron. Rats were separated into a control group and an iron-deficiency group. Rats in the control group were given the standard diet containing ferrous sulfate as the source of iron throughout the experimental feeding period. Rats in the iron-deficiency group were made anemic by feeding on an Fe-deficient diet without any added iron for 3 wk. After the iron-deficiency period, the iron-deficiency group was separated into an Fe-WPC group and a heme iron group fed Fe-WPC and hemin as the sole source of iron, respectively. The hemoglobin content, iron content in liver, hemoglobin regeneration efficiency (HRE) and apparent iron absorption rate were examined when iron-deficient rats were fed either Fe-WPC or hemin as the sole source of iron for 20 d. Hemoglobin content was significantly higher in the rats fed the Fe-WPC diet than in rats fed the hemin diet. HRE in rats fed the Fe-WPC diet was significantly higher than in rats fed the hemin diet. The apparent iron absorption rate in rats fed the Fe-WPC diet tended to be higher than in rats fed the hemin diet (p = 0.054). The solubility of iron in the small intestine of rats at 2.5 h after ingestion of the Fe-WPC diet was approximately twice that of rats fed the hemin diet. These results indicated that the iron bioavailability of Fe-WPC was higher than that of hemin, which seemed due, in part, to the different iron solubility in the intestine.

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.11-16
• /
• 2019

높은 산소 분리 특성과 $CO_2$에 대한 안정성을 보인 $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$(LSTF)가 코팅된 $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$(BSCF) 분리막을 bench 규모의 장치에 적용하여 산소 투과 실험을 수행 하였다. 또한 실험실 규모 장치와 bench 규모장치의 분리막 반응기 내 온도 구배에 따라서 분리막을 3영역으로 나누어 각각 비교 분석하였다. $900^{\circ}C$까지 온도 범위에서 산소 투과 실험을 진행하면서 Cr 침적의 온도 의존성을 조사하였다. 그 결과 실험실 장치에서 측정한 산소 투과율인 $3.79ml/min{\cdot}cm^2$에 비해 현저히 낮은 $2.37ml/min{\cdot}cm^2$를 확인했다. 이와 같은 산소 투과율의 감소는 XRD와 SEM/EDS 분석을 통하여 분리막 반응기의 합금 재질에서 방출되어 나온 기상 Cr의 분리막 표면 침적에 의한 것임을 밝혀냈다. 특히 중온 영역에서 많은 양의 Cr이 발견되었다.