• 제목/요약/키워드: $F_2$

검색결과 23,782건 처리시간 0.049초

Flattening filter-free beam을 이용한 방사선 치료 기법의 특성 및 환자의 시간적.경제적 유용성 평가 (The evaluation of properties for radiation therapy techniques with flattening filter-free beam and usefulness of time and economy to a patient with the radiation therapy)

  • 구장현;원희수;홍주완;장남준;박진홍
    • 대한방사선치료학회지
    • /
    • 제26권2호
    • /
    • pp.363-368
    • /
    • 2014
  • 목 적 : Flattening filter-free (3F) beam과 flattening filter (2F) beam을 이용한 치료기법에 따른 특성 비교와 환자 측면의 시간적 경제적 유용성을 비교 평가하고자 한다. 대상 및 방법 : Alderson rando phantom의 전산화단층촬영 영상을 획득하여 가상의 전립선을 설정한 후 세기변조 방사선치료, 용적변조 회전방사선치료 그리고 체부정위적 방사선치료에 3F와 2F beam을 각각 적용하여 총 6개의 전산화치료계획을 수립하였다. 선량률은 3F beam을 이용한 치료기법에 1200 MU/min을 설정하였고, 2F beam의 경우 600 MU/min을 적용하였다. 3F와 2F beam을 이용한 치료기법의 특성 비교를 위하여 총 monitor unit (MU)값을 비교하였고 치료시간의 비교를 위하여 beam on time (BOT)과 gantry rotation time (GRT)을 측정하였으며, 3F와 2F beam에 의한 각 치료기법에서 발생되는 광중성자 측정을 위하여 Surveillance And Measurement (SAM) 940을 사용하였다. 또한, 환자의 총 내원기간과 자기부담금을 계산하였다. 결 과 : 총 MU값은 세기변조 방사선치료에서 3F beam을 이용하였을 때 2F beam을 이용한 경우보다 최대 34.0% 증가하였고 BOT, GRT 그리고 광중성자 측정값은 체부정위적 방사선치료에 3F beam을 적용하였을 때 2F beam보다 각각 최대 39.8, 38.6, 48.1% 감소하였다. 환자의 총 내원기간과 자기부담금은 3F와 2F beam의 이용에 따른 차이는 없었으며, 치료기법 중 체부정위적 방사선치료가 10일과 169,560원으로 가장 적게 나타났다. 결 론 : 본 연구 결과, 3F beam의 고 선량률을 이용한 치료기법은 2F beam과 비교하여 총 MU값은 증가하였으나 BOT, GRT 그리고 광중성자 측정값이 모두 감소하였다. 이처럼 3F beam의 고 선량률을 사용하는 치료기법은 intra-fraction setup error 및 2차 방사선 유발암 발생률을 줄이는 효과를 기대할 수 있으나, 동일한 치료기법 내에서 3F와 2F beam 사용에 따른 환자에게 특별한 시간적 경제적인 이점은 없었다.

A GENERALIZED ADDITIVE-QUARTIC FUNCTIONAL EQUATION AND ITS STABILITY

  • HENGKRAWIT, CHARINTHIP;THANYACHAROEN, ANURK
    • 대한수학회보
    • /
    • 제52권6호
    • /
    • pp.1759-1776
    • /
    • 2015
  • We determine the general solution of the generalized additive-quartic functional equation f(x + 3y) + f(x - 3y) + f(x + 2y) + f(x - 2y) + 22f(x) - 13 [f(x + y) + f(x - y)] + 24f(y) - 12f(2y) = 0 without assuming any regularity conditions on the unknown function f : ${\mathbb{R}}{\rightarrow}{\mathbb{R}}$ and its stability is investigated.

유채의 실용형질에 대한 유전연구 -제 1 보 유채의 초장, 성숙기 및 종실중의 유전분석- (Genetic Studies in Some Agronomic Characters in Rapeseed (Brassica napus L.) 1. Genetic analysis for maturity, plant height and grain weight per plant.)

  • 이정일;권병선;채영암
    • 한국작물학회지
    • /
    • 제29권1호
    • /
    • pp.84-88
    • /
    • 1984
  • 유채 육종의 기초자료를 얻고자 일본에서 도입한 품종중에서 특성이 뚜렷한 3개품종. 서구 Europe에서 도입한 3품종과 국내에서 육성한 1개품종 모두 7개품종을 교배친으로 하여 1979년 이면교잡을하고 1980~'81년의 F$_1$, F$_2$ 세대의 잡종종자를 재료로 3개 양적 형질에 대하여 유전자의 분포상태. 우성정도. 우성, 열성유전자의 빈도등을 검정한 바 그 결과를 요약하면 다음과 갈다. 1. 성숙기에서 $F_1$을 유전자의 상가적 부분인 D나 Heterosis등에 관여하는$ H_1$. $H_2$ 모두 유의성이 높았으며 성숙이 빠른 것이 우성이었고 성숙에 관여하는 유전자는 $F_1$에서는 3개, $F_2$에서는 1개로 나타났다. 또한 우성정도는 $F_1$에서는 부분우성이나 $F_2$에서는 완전우성으로 나타났다. 2. 종실중에서 우성정도는 $F_1$에서는 완전이나 $F_2$에서는 부분우성이었고 우성방향은 종실중이 무거운 쪽이었으며 유전자수는 3개로 나타났다. 또한 종실중은 열성유전자에 의해서 지배되었다. 3. 초장은 상가적 효과와 우성효과가 컸으며 초장에 관여하는 유전자수는 2개로 나타났다. 또한 우성의 방향은 장간쪽으로 나타났으며 유전력은 높았다.

  • PDF

STABILITY OF AN ADDITIVE (ρ1, ρ2)-FUNCTIONAL INEQUALITY IN BANACH SPACES

  • Yun, Sungsik;Shin, Dong Yun
    • 한국수학교육학회지시리즈B:순수및응용수학
    • /
    • 제24권1호
    • /
    • pp.21-31
    • /
    • 2017
  • In this paper, we introduce and solve the following additive (${\rho}_1$, ${\rho}_2$)-functional inequality $${\Large{\parallel}}2f(\frac{x+y}{2})-f(x)-f(y){\Large{\parallel}}{\leq}{\parallel}{\rho}_1(f(x+y)+f(x-y)-2f(x)){\parallel}+{\parallel}{\rho}_2(f(x+y)-f(x)-f(y)){\parallel}$$ where ${\rho}_1$ and ${\rho}_2$ are fixed nonzero complex numbers with $\sqrt{2}{\mid}{\rho}_1{\mid}+{\mid}{\rho}_2{\mid}<1$. Using the fixed point method and the direct method, we prove the Hyers-Ulam stability of the additive (${\rho}_1$, ${\rho}_2$)-functional inequality (1) in complex Banach spaces.

겔화에 의한 Water-in-Oil에멀젼의 안정성;이산화티타늄($TiO_{2}$)이 함유된 Sun-block Cream의 응용 (Stability of Water-in-Oil Emulsion by Gelation;Application of Sun-Block Cream containing Titanium Dioxide($TiO_{2}$))

  • 김인영
    • 한국응용과학기술학회지
    • /
    • 제17권2호
    • /
    • pp.67-75
    • /
    • 2000
  • Cosmetic industries have recently developed sun-block products, which are composed of W/O or O/W emulsion system. It was very difficult for waterproofing product to show the stability in W/O emulsion with $TiO_{2}$. To enhance the stability of W/O emulsion, it needs to be combined with the water and oil soluble components as the gelling agents. The emulsifiers used in W/O were 3.0% of cetyl dimethicone copolyol, 2.0% of sorbitan sesquioleate as the basic emulsifiers, and 0.6% of quaternium-18 bentonite and 1.5% of dextrin palmitate as stabilizer were used. The content of titanium dioxide was optimized up to 8.0%. Titanium dioxide was used as the UV scattering powder coated with $Al_{2}O_{3}$(UV-sperse T40/TN). The sunscreen cream prepared with W/O emulsion system by using QB and DP showed higher stability than that of W/O emulsion system by using each QB and DP. W/O emulsion from Formula 3 for passing one year was very durable more than F1 and F2. Within W/O emulsion by observing F1, F2 and F3 for one year, F3 was more excellent than F2 and F3 when they were observed at RT, $4^{\circ}C$, $40^{\circ}C$, because F3 used the mixed QB and DP in W/O emulsion. The zeta potential for F1, F2, and F3 after one year were 21, 30 and 43, respectively. From these result F3 was found best stable emulsion. The in-vitro SPF value for F3 was 35 for the initial product at room temperature and also, the in-vitro SPF values of F3 was 32 for after one year. Finally, the mean in-vivo SPF value of 10 volunteers for F3 was 27.3 by the Korea cosmetic association made the rules of SPF.

의복패턴상에서 직물의 각도 변화에 따른 봉합강도 (Seam-Strength as a Function of Angle of Bias on the Patterns)

  • 이명희;최석철
    • 한국의류학회지
    • /
    • 제21권4호
    • /
    • pp.710-717
    • /
    • 1997
  • An investigation made of fabric strength & elongation and the lock stitch seam strength & elongation by stitch density (N1.5; 26 stitches/3 cm, N2.0; 19 stitches/3 cm, N2.5; 14 stitches/3cm) depending on methods of. sample prepariation (angle variations of unseamed sample and overlapping way of seamed sample) It found maximum stitch density that results of the seam strength test was highist in each angle of bias. The results obstained were as follows: 1. As the results of fabric strength and elongation tests as a function of angle of bias, breaking strength were that warp and weft angles (0$^{\circ}$, 90$^{\circ}$) were much higher than bias angles (20$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$) . And otherwise breaking elongation were that 45$^{\circ}$ angle of bias were highest and were that the warp & weft way were lower. 2. As the results of the seam strength tests by the stitch density under samples of same angles, the maximum stitch density were those; under 0$^{\circ}$/0$^{\circ}$, 60$^{\circ}$/60$^{\circ}$:F1, F2-N2.0, F3-N1.5, under 20$^{\circ}$/20$^{\circ}$, 30$^{\circ}$/30$^{\circ}$, 45$^{\circ}$/45$^{\circ}$: F1-N2.5, F2-N2.0, F3-N1.5, under 90$^{\circ}$/90$^{\circ}$: F1, F2, F3-N1.5. 3. As the results of the seam strength tests by the stitch density under samples of symmetry angles, the maximum stitch density were those; under 20$^{\circ}$/-20$^{\circ}$, 30$^{\circ}$/-30$^{\circ}$, 60$^{\circ}$/-60$^{\circ}$: F1, F3-N1.5, F2-N2.0, under 45$^{\circ}$/-45$^{\circ}$: F1, F2-N2.0, F3-N1.5.

  • PDF

Study of Surface Reaction and Gas Phase Chemistries in High Density C4F8/O2/Ar and C4F8/O2/Ar/CH2F2 Plasma for Contact Hole Etching

  • Kim, Gwan-Ha
    • Transactions on Electrical and Electronic Materials
    • /
    • 제16권2호
    • /
    • pp.90-94
    • /
    • 2015
  • In this study, the characterizations of oxide contact hole etching are investigated with C4F8/O2/Ar and CH2F2/C4F8/O2/ Ar plasma. As the percent composition of C4F8 in a C4F8/O2/Ar mixture increases, the amount of polymer deposited on the etched surface also increases because the CxFy polymer layer retards the reaction of oxygen atoms with PR. Adding CH2F2 into the C4F8/O2/Ar plasma increases the etch rate of the oxide and the selectivity of oxide to PR. The profile of contact holes was close to 90°, and no visible residue was seen in the SEM image at a C4F8/(C4F8+O2) ratio of 58%. The changes of chemical composition in the chamber were analyzed using optical emission spectroscopy, and the chemical reaction on the etched surface was investigated using X-ray photoelectron spectroscopy.

한국어 단모음 8개에 대한 음향분석 - F1/F2 모음공간에서의 음향변수를 중심으로 - (An Acoustic Analysis on the Korean 8 Monophthongs - With Respect to the Acoustic Variables on the F1/F2 Vowel Space -)

  • 성철재
    • 한국음향학회지
    • /
    • 제23권6호
    • /
    • pp.454-461
    • /
    • 2004
  • This paper describes the acoustic characteristics of 8 Korean monophthongs. Two acoustic variables were newly manipulated the distance between Fl and F2 (Δ[F2-Fl]). which might be of help for the judgement of the vowel backness. and Euclidian distance between two vowels. [에] & [애] were observed to be merged in both male vowel space and the female's. respectively. The merger of [우] & [오], on the other hand, was only seen in the female space. In case of Fl, which concerns the vowel height. the scope of the females' was 1.36 times longer than that of the males' Regarding F2, which is related to the vowel backness. the females used a space 1.29 times longer than the males. The observation of Euclidian distance between the basic 3 vowels (이. 아. 우) showed that the females have longer distance than the males: [이-아] 1.25 times, [아-우] 1.45 times, and [이-우] 1.35 times. respectively.

포만트 정보의 동적 변화특성 조사에 관한 연구 (Investigation on Dynamic Behavior of Formant Information)

  • 조철우
    • 말소리와 음성과학
    • /
    • 제7권2호
    • /
    • pp.157-162
    • /
    • 2015
  • This study reports on the effective way of displaying dynamic formant information on F1-F2 space. Conventional ways of F1-F2 space (different name of vowel triangle or vowel rectangle) have been used for investigating vowel characteristics of a speaker or a language based on statistics of the F1 and F2 values, which were computed by spectral envelope search method. Those methods were dealing mainly with the static information of the formants, not the changes of the formant values (i.e. dynamic information). So a better way of investigating dynamic informations from the formant values of speech signal is suggested so that more convenient and detailed investigation of the dynamic changes can be achieved on F1-F2 space. Suggested method used visualization of static and dynamic information in overlapped way to be able to observe the change of the formant information easily. Finally some examples of the implemented display on some cases of the continuous vowels are shown to prove the usefulness of suggested method.