• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.235-241
• /
• 1984

Two fractions of pectinesterase from Chinese cabbage were isolated by ammonium sulfate fractionation, ion exchange chromatography on DEAE-cellulose and Sephadex G-150 gel filtration. The fraction F-A and F-B were purified approximately 340- and 10-fold. The similar salt effects and pH optima (pH 7.5-8.0) were obtained for the two pectinesterase fractions. The maximum activity of both two. fractions were obtained at 20-50mM of divalent rations and at 250mM of monovalent rations. The apparent Michaelis constant of the F-A was 0.01% for citrus pectin. The temperature optima for F-A and F-B were $48^{\circ}$ and $55^{\circ}C$, respectively and both fractions were stable in the region of pH 5.0-8.0 at room temperature. The thermal inactivation of the two fractions followed the first order reaction kinetics. From D and Z-values obtained the thermal resistance of the two fractions were characterized.

• Journal of applied mathematics & informatics
• /
• v.23 no.1_2
• /
• pp.167-182
• /
• 2007

The existence of solutions of the following multi-point boundary value problem $${x^{(n)}(t)=f(t,\;x(t),\;x'(t),{\cdots}, x^{(n-2)}(t))+r(t),\;0 is studied. Sufficient conditions for the existence of at least one solution of BVP(*) are established. It is of interest that the growth conditions imposed on f are allowed to be super-linear (the degrees of phases variables are allowed to be greater than 1 if it is a polynomial). The results are different from known ones since we don't apply the Green's functions of the corresponding problem and the method to obtain a priori bounds of solutions are different enough from known ones. Examples that can not be solved by known results are given to illustrate our theorems.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.154-166
• /
• 2016

This study aims to contribute to better understanding the effects of the changes in the parameter values of GroundFilter algorithm(GF), which performs filtering process, and of GridsurfaceCreate algorithm(GC), which creates regular grid, provided in Fusion software on the accuracy of elevation of the final LiDAR-DEM products through comparative analysis. In order to test whether there are significant effects on the accuracy of the final LiDAR-DEM products due to the changes of GF(1, 3, 5, 7, 9) parameter levels and GC(1, 3, 5, 7, 9) parameter levels, two-way ANOVA is conducted based on residuals. The residuals are calculated using the differences between each sample plot's paired field-measured and DEM-derived elevation values given each individual GF and GC level. After that, Tukey HSD test is conducted as a post hoc test for grouping the levels. As a result of two-way ANOVA test, it is found that the change in the GF levels significantly affects the accuracy of LiDAR-DEM elevations(F-value : 27.340, p < 0.01), while the change in the GC levels does not significantly affect the accuracy of LiDAR-DEM elevations(F-value : 0.457). It is also found that the interaction effect between GF and GC levels is not likely to exist(F-value : 0.247). From the results of the Tukey HSD test in the GF levels, GF levels can be divided into two groups('7', '5', '9', '3' vs '1') by the differences of means of residuals. Given the current conditions, LiDAR-DEM can achieve the best accuracy when the level '7' and '3' are given as GF and GC level, respectively.

• The Pure and Applied Mathematics
• /
• v.30 no.1
• /
• pp.43-65
• /
• 2023

In this paper, by using the difference analogue of Nevanlinna's theory, the authors study the shared-value problem concerning two higher order difference operators of a transcendental entire function with finite order. The following conclusion is proved: Let f(z) be a finite order transcendental entire function such that λ(f - a(z)) < ρ(f), where a(z)(∈ S(f)) is an entire function and satisfies ρ(a(z)) < 1, and let 𝜂(∈ ℂ) be a constant such that ∆_𝜂ⁿ⁺¹ f(z) ≢ 0. If ∆_𝜂ⁿ⁺¹ f(z) and ∆_𝜂ⁿ f(z) share ∆_𝜂ⁿ a(z) CM, where ∆_𝜂ⁿ a(z) ∈ S ∆_𝜂ⁿ⁺¹ f(z), then f(z) has a specific expression f(z) = a(z) + Be^Az, where A and B are two non-zero constants and a(z) reduces to a constant.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.603-609
• /
• 2022

The dose distribution in the human body was evaluated and analyzed through dosimetry data using water phantom, ionization chamber and simulated by Monte Carlo simulation for ^99mTc and ¹⁸F sources, which are frequently used in the nuclear medicine in this study. As a result of this study, it was found that the dose decreased exponentially as the distance from the radioisotope increased, and it particularly showed a tendency to decrease sharply when the radioisotope was separated by 5 cm. It means that a large amount of dose is delivered to an organ located within 4 cm of source's movement path when a source uptake in the human body. Numerically, it was formed in the rage of 0.16 to 2.16 pC/min for ^99mTc and 0.49 to 9.29 pC/min for ¹⁸F. In addition, the energy transfer coefficient calculated using the result was found to be similar to the measured value and the simulation value in the range of 0.240 to 0.260. Especially, when the measured data and the simulation value were compared, there was a difference is within 2%, so the reliability of the data was secured. In this study, the distribution of radiation generated from a source was calculated to quantitatively evaluate the internal dose by radioisotopes. It presented reliable results through comparative analysis of the measurement value and simulation value. Above all, it has a great significance to the point that it was presented by directly measuring the distribution of radiation in the human body.

• Journal of Sericultural and Entomological Science
• /
• v.31 no.2
• /
• pp.91-101
• /
• 1989

This experiment was carried out to analyze genetic parameters for the selection of silkworm by diallel-crossing with three Japanese and four Chiness silkworm races. Heritability, genetic correlation and path coefficient were calculated as the statistical parameters to evaluate direct or indirect effects of various gentic characters on bave weight. The heritabilities of fifth instar period, cocoon weight, cocoon layer weight, cocoon layer ration, fibroin contents, boiling off ratio and bave weight were over 76.65% in both F1 and F2 generations. There were positive coefficients in both phenotypic and genotypic correlations between male and female of both F1 and F2 generations. The latter showed greater values in general. The correlation between bave weight and the characters of cocoon weight, cocoon layer weight, cocoon layer ratio, fibroin contents were over 0.727 in both sexes of F1 and F2. Therefore, these results suggest that above characters would be useful for genetic selection of silkworms. As result of path coefficient analysis, there was a direct effect with path coefficient value of 0.991 between bave weight and F1 female cocoon layer weight, and with the value of 0.803 between bave weight and F1 male cocoon weight. In F2 the effect showed 0.938 between bave weight and male cocoon weight and cocoon layer weight had greater influence on direct or indirect effects (in path coefficient) than the others.

• Journal of the Korean Mathematical Society
• /
• v.32 no.4
• /
• pp.761-773
• /
• 1995

The nonlinear boundary value problem $$ y" = f(x, y, y') = -\frac{x}{3}y' - \frac{y^2}{g(x)}, 0 < x < 1, $$ $$ (1.1) y'(0) = 0, and either (H) : y(1) = \lambda > 0 $$ $$ or (S) : y'(1) + (1 - \upsilon)y(1) = 0, 1 - \upsilon > 0, $$ $$g \in C[0, 1], k \leq g(x) \leq K on [0, 1] for some k, K > 0 $$ arises in the nonlinear circular membrane under normal pressure [2, 3]., 3].

• Journal of dental hygiene science
• /
• v.6 no.4
• /
• pp.231-235
• /
• 2006

This study evaluated the properties of polyvinylsiloxane impression materials: Strain-in-compression, Elastic recovery, Consistency, and Wettability. Four polyvinylsiloxane impression materials(Examixfine, GC, Japan; Aquasilultra, Dentsply, USA; Extrude, Kerr, USA; Perfect-F, Handae, Korea) were used in this study. The measured data were analyzed with SPSSWIN 12.0 program. The results were as follows : 1. The strain-in-compression values showed that Extrude had the lowest value, 4.86% and Examixfine had the highest value, 6.78%. Significant difference between Examixfine and Perfect-F was not found but the other groups had significant differences(p = 0.000). 2. In the elastic recovery test, Extrude had the highest, 99.83% and Perfect-F had the lowest, 96.54%. There is no significant difference between Examixfine and Aquasilultra. The other impression material groups showed significant differences(p = 0.000). 3. The measurement of consistency results that the diameter of Examixfine was the largest, 45.12mm and one of Perfect-F was the smallest, 40.28 mm. No differences were shown between Examixfine and Aquasilultra and between Extrude and Perfect-F(p = 0.001). 4. Aquasilultra had a better hydrophilicity($47.85^{\circ}$) than other materials. Perfect-F had a larger contact angle($94.89^{\circ}$) and was hydrophobic. There were significant differences between groups(p = 0.000). 5. As for correlation among the test types, contact angle correlated with strain-in-compression, elstic recovery and consistency. The strain-in-compression had correlation to contact angle and elastic recovery. The elastic recovery correlated with contact angle and strain-in-compression. And the consistency had correlation to contact angle.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.467-471
• /
• 2016

New electron deficient moiety, 6,7-difluoro-2,3-dihexylquinoxaline, was developed for the push-pull type copolymer for organic photovoltaics (OPVs). The PFDTQxF with lower HOMO energy level was synthesized using fluorene and 6,7-difluoro- 2,3-dihexylquinoxaline by Suzuki polymerization. The PFDTQxF thin film shows two absorption peaks at 368 and 493 nm. The HOMO and LUMO energy levels of PFDTQxF are calculated -5.55 and -3.91 eV, respectively. The device comprising PFDTQxF showed a $V_{OC}$ value of 0.47 V, a $J_{SC}$ value of $4.48mA/cm^2$, and a FF of 0.32, which yielded PCE of 0.78%, under the illumination of AM 1.5.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.657-665
• /
• 2021

The study aims to assess the acceptance of social commerce and participate in social commerce amongst Omani people. The questions of the survey Instrument were prepared in English later converted into Arabic. The survey instrument was having two parts; the first part sought the demographic information like age, gender, education, occupation etc. The second part of the instrument was related to the variables, which was in 5-point Likert scale, where 5 means strongly agree while 1 meaning strongly disagree. The data was collected using online and offline surveys, making the number of the valid responses to 478. A conceptual model was developed using the following variables. The selected variables such as "Familiarity" (F), "Trust" (T), "Perceived usefulness" (PU), "Perceived ease of use" (PEU), "Intention to Purchase" (IP). The hypothesis was tested using structural equation modelling. The results indicate that all six hypotheses were supported. The F, T and PEU, and PU was found to be positive and significant related to intention to purchase (p-value 0.003, 0.001, 0.000. & 0.007). Amongst the four, p value of F was found to be the lowest and PU was found to be the highest. This indicate F was strong indicator of IP as compared to others. PUE relates to PU, and F was related to IP.