• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.13-18
• /
• 1997

The effects of the various raw material composition and sintered temperature on the physical properties of Ni-Zn ferrite have been investigated. They turned out to be spinel structure by X-ray diffraction and the size of grain from microscope was from 6 ${\mu}{\textrm}{m}$ to 16 ${\mu}{\textrm}{m}$. As the sintering temperature was increased from 1030 $^{\circ}C$ to 1070 $^{\circ}C$, the initial permeability and magnetic induction has increased and the both of Q factor and coercive force has decreased. The coercive force and curie temperature were almost the same at each specimen. Their values were about 0.20 Oe and 220 $^{\circ}C$. The frequency of specimen will used in the range from 400 kHz to 20 MHz. The basic composition of $Ni_{0.14}Zn_{0.64}Cu_{0.22}Fe_2O_4$ (specimen B) sintered at 1050 $^{\circ}C$ shows the best results at magnetic induction($B_r & B_m$).

• The Korean Journal of Ecology
• /
• v.12 no.2
• /
• pp.109-122
• /
• 1989

The vegetation and landscape of Hokkaido were phytosociologically referred. The region of F a g e t e a c r e n a t a e on Hokkaido is divided into two types of deciduous broad-leaved forest: the oak (Quercus mongolica var. grosseserrata) forests mixed with conifers (mainly Abies sachalinensis) and the beech (Fagus crenata) forests of northernmost distribution in far-east Asia. The oak forests, which is dominated by Quercus mongolica var. grosseserrata in Japanse islands, seem to be developed from different climatic and edaphic conditions, especially in the amount and sharing pattern of precipitation in a year, and weak acid brown forest soil, volcanic ash soil and sandy soil. On the all-inclusive phytogeographical view-point, Hokkaido is situated at northernmost region of F a g e t e a c r e n a t a e (cool-temperate zone)neighboring with subarctic and subalpine vegetation, vegetation, but the evergreen broad-leaved forest (C a m e l l i e t e a j a p o n i c a e, warm-temperate zone) is abscent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.325-325
• /
• 2007

The perovskites in the $LaAlO_3-BaZrO_3$ system (i.e., $(1-x)LaAlO_3-xBaZrO_3$ were fabricated by a solid state reaction and their dielectric properties were investigated. For the compositions of x=0.1~0.9, the mixture of $LaAlO_3$ with a rhombohedral structure and $BaZrO_3$ with a cubic was observed when the sintering was conducted at $1500^{\circ}C$, indicating that the solubility of constituent elements was very low and a narrow solid solution region might exist. The large difference of ionic radii between $La^{3+}$ ion (0.136nm, C.N.=12) and $Ba^{2+}$ ion (0.161nm) or $Al^{3+}$ ion (0.0535nm, C.N.=6) and $Zr^{4+}$ ion (0.072nm) might hinder the mutual substitution. Within the compositions of x=0~0.7, the dielectric constant of the mixture increased with the amount of $BaZrO_3$, i.e., x value, which was in good agreement with the logarithmic mixing rule (In $_{r,i}={\Sigma}v_iln\;_{r,i}$). The increase in $BaZrO_3$ doping decreased $Q{\times}f$ value significantly due to the low $Q{\times}f$ value of $BaZrO_3$ itself, a poor microstructure of the mixture with an increased grain boundary area per volume, and defects in the cation and oxygen sub-lattices which were respectively caused by the evaporation of barium during the sintering process and the substitution of Ba on La-site or Al on Zr-site.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.278-282
• /
• 2001

The recombination motion of Partial dislocations on basal slip (0001) 1/3<1120> in sapphire ($\alpha$-Al$_2$$O_3$) single crystals was investigated using the four-point bending test with the prism plane (1120) samples. These bending experiments were carried but in the temperature range from $1200^{\circ}C$ to $1400^{\circ}C$ at various engineering stresses 90MPa, 120MPa, and 150MPa. During these tests it was shown that an incubation time was needed for basal slip to be activated. The activation energy for the incubation time was 5.6-6.0eV in the temperature range from $1200^{\circ}C$ to $1400^{\circ}C$. The incubation time is believed to be related to recombination of climb dissociated partial dislocations via self-climb. In addition, these activation energies are nearly same as those for oxygen self-diffusion in $Al_2$$O_3$ (approximately 6.3 eV). Thus, the recombination of the two partial dislocations would be possibly controlled by oxygen diffusion on the stacking fault between the partials.

• Korean Journal of Microbiology
• /
• v.30 no.3
• /
• pp.225-231
• /
• 1992

l o identil) ;~nclc li~iracterize; In iiscorhate oxiililinp enzyme in ('/rItrn~i~rlon~ir~c~t~itr~~lr.o\ r(1rii. we studicil ;is li)llows. Ascorh;ric oxiiliring cn/;jme activit) f ~ o ~thne crude extract 01' ( ' / ~ l o n ~ ~ . c l o t ~1~~oit~rl~1oin~/.t\ii W;I\ dctccietl by 5pecific active 5ta1ning through nati\e gel cletrophorcsi\ and ~iltra\~iolestp eciroscopy. Ascorb~ttco xidizing c n ~ y m ew i15 partilly 1~1rilieJ by \;~riousp roccclurcs inclucli~lga rnmoniu~ns uIl';~tcp recipit;iion. aJ\orption ~111-om;~togrophy on Iiy~lroxyapaiitca nd Scphailcx <;-I50 gel lillration chrornatogral>liy. Plie ~nolecularw eight 01' the nativc cnrytiic was ahour 88.000 tlalton hy nativc gel elcciroplloresis anci subunit niolecul;ir ~rciglit 55,000 ol' this cnrymc w;~c determined hy SIIS-P.ASI!. The optimum tcmper~tture ii)r the cnrymc nos ahout 5j$^{\circ}$C and pH 4.6 was the optimum. Moreover. ascorhaie oxi~losc in C: reinhardtii was confirmet1 by Ll1e\tcrn blotting technique.

• Journal of the Korean Magnetics Society
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2003

Diffusion speed of Cu metal fine particle is fast better than CuO, so it will promote grain growth in sintering. In this paper, the influence on substituting Cu fine particle for CuO of NiCuZn ferrite with basic composition (N $i_{0.204}$C $u_{0.204}$Z $n_{0.612}$ $O_{1.02}$)F $e_{1.98}$ $O_{2.98}$ has been investigated with varying Cu/CuO ratio. The perfect spinel structure of sintered specimen at 90$0^{\circ}C$ was confirmed by the analysis of XRD patterns. The best condition was obtained when the ratio of Cu/CuO was 60%, and the permeability was 1100 and Ms was 87 emu/g in this condition. Cu has influenced on grain growth in sintering, substituting Cu fine particle for CuO could lower sintering temperature over the 3$0^{\circ}C$. After sintering, substituting Cu performed as good as CuO.s CuO.s CuO.

• Journal of the Korean Society for information Management
• /
• v.6 no.1
• /
• pp.3-14
• /
• 1989

The purpose of t h i s paper i s to i n v e s t i g a t e the development of academic magazines and i t s Charac t e r i s t ~ c s i n o r d e r to determine i t s function a s a means of p r e s e n t i n g t h e i r r e s u l t s of reasearch in Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.413-418
• /
• 2011

The global warming by abuse of fossil fuel is going to become an important problem which must be solved by human beings. This research is to develop a high temperature heat storage tank with high efficiency and to investigate the performance characteristics of this tank to help these energy problem. But the researches for this area have not been enough until now and specially the researches for high temperature heat storage tank are very few. For this research, heat storage bricks were made using MgO powder and studied about the performance characteristics of high temperature heat storage tank by experimental method. Through this research, it was confirmed that MgO can be used as a heat storage material for high temperature range.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.411-414
• /
• 1989

It is well known that switching overvoltages in the electric power system can damage electric power apparatus. To investigate switching overvoltages, electric power system has been modeled using mathematical equal ions. Using developed model, switching overvoltages in the transformer terminal have been computed and analysed.