• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1820-1826
• /
• 2001

In this paper, we present a modeling scheme for the already-installed two-wire home phone lines with arbitrary topologies and show that the inter-symbol interference due to the topology can be removed using an adaptive equalizer. The transmission characteristics of the arbitrary-configured two-wire home phone lines can be analyzed through the ABCD matrices. The simulation result shows that the impedance mismatch due to the branch lines renders nulls in the frequency response or delayed pulses in the impulse response. These nulls or delayed pulses cause inter-symbol interference that inhibits correct signal detection. An adaptive equalizer is shown to be effective in eliminating the interference. Also, the simulation result shows that the equalizer converges in 1.5 ms at a data rate of 1 Msps at signal-to-noise ratios greater than 15 dB. In addition, from the result of relation between E$\_$b//N$\_$and BER(Bit Error Rate), we can see that E$\_$b//N$\_$o/ more than 19 dB is required for the data communication with a BER less than 10$\^$-5/.

• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.906-910
• /
• 1996

Ferroxplana N $i_{2}$Y(B $a_{2}$N $i_{2}$F $e_{12}$ $O_{22}$ ) magnetic particles, which is one of the hexagonal ferrite were synthesized by a coprecipitation method. The coprecipitates were prepared by adding aqueous solution of BaC $I_{2}$ - 2 $H_{2}$O, NiC $I_{2}$ - 6 $H_{2}$O and FeC $I_{3}$ - 6 $H_{2}$O(of which the mole ratio is $Ba^{+2}$ : N $i^{+2}$ : F $e^{3+}$= 1 : 1 : 6) to a mixture of NaOH and N $a_{2}$C $O_{3}$. The shape of Ferroxplana N $i_{2}$Y magnetic particles obtained at 1, 100(.deg. C) was hexagonal plate-like, average particle size and aspect ratio were 2(.mu.m) and 7, respectively.y.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.939-947
• /
• 2010

The LDPC(Low-Density Parity-Check) code, which is one of the channel encoding methods in IEEE 802.11n wireless LAN standard, has superior error-correcting capabilities. Since the hardware complexity of LDPC decoder is high, it is very important to take into account the trade-offs between hardware complexity and decoding performance. In this paper, the effects of LLR(Log-Likelihood Ratio) approximation on the performance of MSA(Min-Sum Algorithm)-based LDPC decoder are analyzed, and some optimal design conditions are derived. The parity check matrix with block length of 1,944 bits and code rate of 1/2 in IEEE 802.11n WLAN standard is used. In the case of $BER=10^{-3}$, the $E_b/N_o$ difference between LLR bit-widths (6,4) and (7,5) is 0.62 dB, and $E_b/N_o$ difference for iteration cycles 6 and 7 is 0.3 dB. The simulation results show that optimal BER performance can be achieved by LLR bit-width of (7,5) and iteration cycle of 7.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.562-570
• /
• 1997

In Direct Sequence Code Division Multiple Access(DS/CDMA) communication systems, it is important to contraol the power of reverse link channel evenly for overall channel capacity. To control the reverse link powers efficiently, it is necessary to estimate signal quality of each reverse link channel. In this paper, we discuss a method to estimate the signal-to-noise ratio(SNR) for each channel by measuring the powers of pilot and noises. Computer simulations are done to show the effectiveness of the scheme.

• Journal of the Korean Chemical Society
• /
• v.45 no.4
• /
• pp.312-317
• /
• 2001

7'-Aldehyde-nucleosides analogue (2a, 2c) were synthesized from 6-N-benzoyl-2',3'-O-isopropylideneadenosine and uridine. The condensation of 2 with ethoxycarbonylmethylene Wittig reagent produced the adenosine and uridine analogues containing extended conjugated diene and ethoxycarbonyl group, ethyl-1',5',6',7',8'-pentadeoxy-1'-(adenin-9-yl)-$\beta$-D-ribo-nona-5'(E),7'(E)-dienofuranuronate (4b) and ethyl-1'. 5',6',7',8'-pentadeoxy-1'-(uracil-1-yl)-$\beta$-D-ribo-nona-5'(E),7'-(E)-dienofuranuronate (4c). 9-[8',8'-dibromo-5',6',7',8' -tetradeoxy-$\beta$-D-ribo-octa-5'(E),7'(E)-diene]nucleosides (6b, 6c) were also prepared from 2 with similar method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.563-566
• /
• 2000

The effect of CuO and CuO-B $i_2$ $O_3$ additives on microwave dielectric properties of (P $b_{0.45}$C $a_{0.55}$)[F $e_{0.5}$N $b_{0.5}$)$_{0.9}$S $n_{0.1}$] $O_3$were investigated to decrease the sintering temperature for usage of Low Temperature Co-firing Ceramics (LTCC). The (P $b_{0.45}$C $a_{0.55}$)[F $e_{0.5}$N $b_{0.5}$)$_{0.9}$S $n_{0.1}$] $O_3$ceramics was sintered at 11$65^{\circ}C$. In order to decrease the sintering temperature, CuO and Cuo-B $i_2$ $O_3$ were added in the (Pb,Ca)[(Fe,Nb)Sn] $O_3$ with CuO-B $i_2$ $O_3$. For the addition of 0.4 wt.% CuO, the sintered density and the dielectric constant of the ceramics were revealed the maximum values of the 6.06g/c $m^2$ and 83 respectively and temperature coefficient of resonance frequency ($\tau$$_{f}$) shifted to the positive value. As increasing B $i_2$ $O_3$to the (Pb,Ca)[(Fe,Nb)Sn] $O_3$ with CuO-B $i_2$ $O_3$with 0.2 wt.% CuO, the sintered density, the $\varepsilon$$_{r}$ and the Q was decreased, and $\tau$$_{f}$ was minimized at 0.2 wt.% CuO, and 0.2 wt.% B $i_2$ $O_3$. For this composition, dielectric properties were $\varepsilon$$_{r}$ of 81, Q. $f_{0}$ of 4400 GHz, and $\tau$$_{f}$ of 5 ppm/$^{\circ}C$ at sintering temperature of 100$0^{\circ}C$. the relationship between the microstructure and properties of ceramics was studied by X-ray diffraction(XRD), scanning electron microscopy(SEM).copy(SEM).oscopy(SEM).copy(SEM).EM).

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.27-32
• /
• 2014

A doppler shift is generated by moving a transmitter or receiver operated in communication systems. The doppler frequency shift between a transmitter and a receiver or the frequency offset present in transceivers must be removed to get the wanted system performance. FTS is used for preventing an accident from operating abnormally and for guaranteeing public protection. A launching vehicle's initial velocity is very fast in order to escape the earth and the amount of doppler shift is large. Recently many studies to adopt the next generation FTS are ongoing. To introduce new FTS, the effects of doppler shift on the performance of the new FTS must be studied. In this paper the doppler effect caused by launching vehicle's velocity affecting the performance of FTS receiver is investigated into two cases, one is for EFTS as a digital FTS and the other is for FTS using a tone signal. Noncoherent DPSK and noncoherent CPFSK are considered as the modulation methods of EFTS. In the cases of the doppler frequency shift of 200Hz present in EFTS using noncoherent DPSK and noncoherent CPFSK are simulated. Simulation results show that $E_b/N_o$ of 0.5dB deteriorates in the region of near BER of about $10^{-5}$ in RS coding. And there is no performance variation in $E_b/N_o$ or $E_b/N_o$ is worsened about 0.1dB in the same BER region for the case of using convolutional and BCH coding. Quadrature detector used in FTS using tone signals is not influenced by the doppler frequency shift.

• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.7-11
• /
• 1993

Abstract Oxidation kinetics of silicon oxide films formed by rapid thermal oxidizing Si substrate in $N_2$O ambient studied. The data on $N_2$0 oxidation shows that the interfacial nitrogen-rich layers results in oxide growth in the parabolic regime by impeding oxidant diffusion to the Si$O_2$-Si interface even for ultrathin oxides. The activation energy of parablic rate constant, B, is about 1.5 eV, and the energy increses with oxide thickness.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.985-987
• /
• 2005

자료의 크기가 방대한 응용 프로그램에서는 메인 메모리와 저장 장치간의 자료 입출력(I/O)이 전체 계산의 주요 병목 요인으로 작용한다. 본 논문은 [2004 한국정보처리학회 추계논문집 제11권 제2호 1139-1142]에서 제안된 그리드(grid) 그래프를 위한 입출력 효율적인 depth-first search (DFS) 알고리즘을 지원하기 위한 입출력 효율적인 영역 구분자를 구하는 알고리즘을 제안 한다. 그 입출력 복잡도 (I/O-Complexity)는 O(Soft(N))이다. 여기서 N=|V|+|E|이고 $sort(N)=\Theta((N/B)log_{M/B}(N/B))$이다.

• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.13-18
• /
• 1997

The effects of the various raw material composition and sintered temperature on the physical properties of Ni-Zn ferrite have been investigated. They turned out to be spinel structure by X-ray diffraction and the size of grain from microscope was from 6 ${\mu}{\textrm}{m}$ to 16 ${\mu}{\textrm}{m}$. As the sintering temperature was increased from 1030 $^{\circ}C$ to 1070 $^{\circ}C$, the initial permeability and magnetic induction has increased and the both of Q factor and coercive force has decreased. The coercive force and curie temperature were almost the same at each specimen. Their values were about 0.20 Oe and 220 $^{\circ}C$. The frequency of specimen will used in the range from 400 kHz to 20 MHz. The basic composition of $Ni_{0.14}Zn_{0.64}Cu_{0.22}Fe_2O_4$ (specimen B) sintered at 1050 $^{\circ}C$ shows the best results at magnetic induction($B_r & B_m$).