• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.81-81
• /
• 2003

The stochiometric mixture of evaporating materials for the CuGaSe$_2$ single crystal thin films were prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal CuGaSe$_2$, it was found tetragonal structure whose lattice constant no and co were 5.615$\AA$ and 11.025$\AA$, respectively. To obtains the single crystal thin films, CuGaSe$_2$ mixed crystal was deposited on throughly etched GaAs(100) by the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were 61$0^{\circ}C$ and 45$0^{\circ}C$ respectively, and the growth rate of the single crystal thin films was about 0.5${\mu}{\textrm}{m}$/h. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of van der pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by pizoelectric scattering in the temperature range 30K to 150K and by polar optical scattering in the temperature range 150K to 293K. The optical energy gaps were found to be 1.68eV for CuGaSe$_2$ single crystal thin films at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation then the constants in the Varshni equation are given by a=9.615$\times$ 10$^{-4}$ eV/K, and $\beta$=335K. From the photocurrent spectra by illumination of polarized light of the CuGaSe$_2$ single crystal thin films. We have found that values of spin orbit coupling ΔSo and crystal field splitting ΔCr was 0.0900eV and 0.2498eV, respectively. From the PL spectra at 20K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be 0.0626eV and the dissipation energy of the acceptor-bound exciton and donor-bound exciton to be 0.0352eV, 0.0932eV, respectively.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.429-432
• /
• 2011

The feasibility of applications of the char obtained from a gasification process of municipal-waste refuse derived fuel (RDF) as an auxiliary fuel was evaluated by combustion experiments. The higher heating value of the RDF char was 3000~4000 kcal/kg and its chlorine content was below the standard requirement demonstrating its potential as an auxiliary fuel. In the combustion exhaust gas, the maximum $NO_x$ and $SO_2$ concentrations were 240 ppm and 223 ppm, respectively. If an aftertreatment is applied, it is possible to control their concentrations low enough to meet the air pollutant emission standard. The HCl concentration was relatively high indicating that a care should be taken for HCl emission from the combustion of RDF. Based on the temperature distribution within the reactor, the concentration change of $O_2$ and $CO_2$, and the amount and the loss on ignition of solid residue, it was inferred that the combustion reaction was the most reliable when the excess air ratio of 1.3 was used.

• Restorative Dentistry and Endodontics
• /
• v.29 no.5
• /
• pp.413-422
• /
• 2004

Established microleakage tests have their own disadvantages. In this study, 3D reconstruction method was tried to overcome these disadvantages. Four types of microleakage tests were used and relationships among them were estimated: penetrated dye volume: marginal adaptability: degree of dye penetration and relative penetrated length to cavity wall. Twenty-four Class V cavities were bulk filled with composite (Esthet X) following surface treatments: N group (no treatment): E group (etching only): T group (etching + Prime & Bond NT). 50% silver nitrate was used as a dye solution after thermocycling ($5^{\circ}C{\;}&{\;}55^{\circ}C$, 1.000 times). Teeth were serially ground with a thickness of 0.2 mm. Volume of dye penetration was estimated from a three-dimensionally reconstructed image with a software (3D-DOCTOR). Percentage of margin without gap was estimated from SEM and degree of dye penetration and the relative length of dye penetration to overall cavity wall were also estimated. ANOVA and Scheffe test for dye volume, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman's rho test for checking of relationships among methods were used. The results were as follows: 1. Dye penetration could be seen from several directions, furthermore, its volumetric estimation was possible. 2. Reverse relationship was found between dye volume and marginal quality (r = -0.881/ p = 0.004). 3. Very low relationship was seen between dye volume and two-dimensional tests (degree of dye penetration and relative length). However, 2D evaluation methods showed high relationship (p = 0.002-0.054) each other. 4. Three times vertical section could be recommended as a 2D test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1858-1865
• /
• 2007

In this paper, we introduce the design and implementation of satellite IP modem. The designed satellite IP modem shows the performance of 0.2% overhead, BER=10-5 when Eb/No=6dB, frequency offset of 8KHz, data rate up to 1536Kbps, $F_{if}=140MHz$. The designed system is verified through software simulation and then implemented with MPC86x communication processor, TMS320C6416 DSP, and Altera FPGA. Since each hardware unit is implemented in daughter board for modularity, we can reduce the development time and easily improve the performance with using better processor. Linux is used for embedded OS because it shows better performance in IP manipulation multitask processing, and hardware control through device driver. The implemented system is tested and verified with channel simulator. Since the proposed IP modem shows small size and light weight, that can be used anywhere with easy if you need IP environment.

• Restorative Dentistry and Endodontics
• /
• v.47 no.2
• /
• pp.16.1-16.9
• /
• 2022

Objectives: This study compared the cyclic fatigue resistance of One Curve (C wire) and F6 Skytaper (conventional austenite nickel-titanium [NiTi]), and 2 instruments with thermos-mechanically treated NiTi: Protaper Next X2 (M wire) and Hyflex CM (CM wire). Materials and Methods: Ten new instruments of each group (size: 0.25 mm, 6% taper in the 3 mm tip region) were tested using a rotary bending machine with a 60° curvature angle and a 5 mm curvature radius, at room temperature. The number of cycles until fracture was recorded. The length of the fractured instruments was measured. The fracture surface of each fragment was examined with a scanning electron microscope (SEM). The data were analyzed using one-way analysis of variance and the post hoc Tukey test. The significance level was set at 0.05. Results: At 60°, One Curve, F6 Skytaper and Hyflex CM had significantly longer fatigue lives than Protaper Next X2 (p < 0.05). No statistically significant differences were found in the cyclic fatigue lives of One Curve, F6 Skytaper, and Hyflex CM (p > 0.05). SEM images of the fracture surfaces of the different instruments showed typical features of fatigue failure. Conclusions: Within the conditions of this study, at 60° and with a 5 mm curvature radius, the cyclic fatigue life of One Curve was not significantly different from those of F6 Skytaper and Hyflex CM. The cyclic fatigue lives of these 3 instruments were statistically significantly longer than that of Protaper Next.

• Journal of the Korean Magnetics Society
• /
• v.7 no.6
• /
• pp.299-307
• /
• 1997

NdFeB films have been grown onto Si(100) substrate by a KrF pulsed laser ablation of the targets of $Nd_xFe_{90.98-x}B_{9.02}$ (x=17.51~27.51) at the substrate temperature of 620~700 $^{\circ}C$ and the laser beam energy density of 2.75~5.99 J/$\textrm{cm}^2$. The films exhibit no preferred orientation, however, good hard magnetic properties were produced from as-deposited condition : $4{\pi}M_s$=7 kG, $4{\pi}M_r$=4 kG, and $H_c$=300~1000 Oe. The depositon rate was not greatly influenced by changing the substrate temperature, but it increases linearly by increasing the beam energy density. The beam energy density of 3 J/$\textrm{cm}^2$ gave the optimal condition to have the highest $4{\pi}M_r$ and $H_c$ as well. The higher content of Nd induces a higher coercivity and $4{\pi}M_r$ at the same time without prominent change in $4{\pi}M_s$.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.2
• /
• pp.137-157
• /
• 1993

This study was carried out to investigate the optimal condition for multiple propagation through leaf tissue culture and to apply anther culture techniques to Pulsatilla koreana Nakai breeding. Leaf and anther of Pulsatilla koreana Nakai were cultured on MS, MT, LS and $B_5$ media supplemented with several growth regulators and nitrogen sources under various conditions. For callus induction and differentiation from the Pulsatilla koreana leaf segments were more effective in the combination of zeatin and auxin than auxin alone. The color of the callus was green when treated with IBA alone. Shoot differentiation was more effective when treated with zeatin than auxin alone, especially the best hormoal combination for shoot differentiation was zeatin 1.0mg/l +NAA 0.1mg/l, while 2,4-D inhibited shoot differentiation. The appeared rate of S pollen was 35% in vivo, while that of S pollen by low temperature$(4^{\circ}C)$ pretreatment for 4 days was increased by 53% and the optimum culture time for callus induction from anther was uni-nucleate stage. $B_5$ basal medium supplemented with NAA 0.5mg/l and zeatin 1 mg/l was the most effective on callus formation and the best results of plant regeneration were obtained from combination of NAA 0.5mg/l and zeatin 0.5mg/l in anther culture. $NH_{4}NO_3$ as more effectives as the nitrogen source than $KNO_3$ and the combination with zeatin 2.0mg /L was the best effective. The best combination for plant regeneration in callus induced from anther was $NH_{4}NO_3$ 1650mg/l + $KNO_3$ 3800mg/l + zeatin 2.0mg/l. Ploidy level of anther-derived plants appeared 28% haploid, 47% diploid and the others were triploid, tetraploid and mixploid. In compare with E.S.T, M.D.H and P.X banding patterns were distinguished among callus, haploid and diploid plants in electrophoresis.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.2
• /
• pp.96-100
• /
• 2005

Objective: The brain computed tomography(CT) is an important tool throughout the clinical course of chronic subdural hematoma(CSDH). In CT findings, the density of CSDH is different in each case. We analyze management options and results according to the density of CSDH. Methods: Seventy one patients with CSDH, who had been managed in our institute from August 2001 to December 2003, were reviewed retrospectively. The authors divided the patients into six groups according to the density of hematoma; Group A-hypodense rather than the brain parenchyma, group B-isodense, group C-hyperdense, group D-mixed with hypodense and hyperdense, group E-mixed with isodense and hypodense and group F-mixed with isodense and hypersdense. In each group, the operation method, the duration of the indwelling catheter and prognosis were analyzed. Results: The patients who showed mixed density were 39 and, those who showed single density were 32. All the patients underwent burr hole drainage for the primary choice. There was only two cases that needed additional craniotomy. The average duration of indwelling catheter was $5.40{\pm}1.91$ days. Statistically the duration was not different in each group(p-value<0.05, $x^2$ test). Three cases recurred, one in group C, another in group D, and the last in group E. It had no statistical significance due to low incidence of recurrence. Conclusion: We conclude that burr hole drainage is an acceptable primary treatment option for CSDH even though the density of hematoma is different in every single case.

• The Journal of the Korean Society for Microbiology
• /
• v.22 no.3
• /
• pp.197-208
• /
• 1987

Chlamydia trachomatis has now shown that this interesting intracellular parasite is a cause of nongonococcal urethritis, infantile pneumonia, pelvic inflammatory disease and epididymitis, in addition to lymphogranuloma venerum and inclusion conjunctivitis. There are several diagnostic methods for C. trachomatis, but the method using monoclonal antibody is the most sensitive and specific. The hybride cell were prepared by fusion of myeloma cell($P_3X_{63}\;Ag_8{\cdot}V_{653}$) of mouse and lymphocyte of mouse(BALB/c) that were immunized with formalin killed C. trachomatis serotype D. The cell mixtures after fusion were dispensed into 640 wells of the 96 well culture plates and continuously cultured in HAT medium for 2 weeks. The supernatants of culture media in 83(13%) wells were reacted with C. trachomatis, which were determined by enzyme-linked immunosorbent assay in 96 well microplate. The clones that secreted antibody to C. trachomatis were cloned by limiting dilution. Only six monoclones secreted antibody to C. trachomatis. The antibody titer of ascitic fluid that collected from same BALB/c mice bearing hybridoma cells was above 1:100,000. These monoclonal antibodies that were IgG reacted with elementary and reticulate bodies of all serotypes(Ba, D, E, F, G, H, J and LGV type-I) using ELISA and indirect immunofluorescence stain, but there were no cross reaction with other bacteria(coagulase negative Staphylococcus, Proteus and E. coli). We concluded these six monoclones secreted the same monoclonal antibody to C. trachomatis. The sensitivity and specificity of the monoclonal antibody compared with Microtrak(confirmatory test of C. trachomatis, Syva) was 100%, respectively.

• Korean Journal of Clinical Pharmacy
• /
• v.21 no.4
• /
• pp.353-363
• /
• 2011

The World Health Organization (WHO) declared the outbreak of H1N1 pandemic in 2009. South Korea also had outbreaks of H1N1 virus and used oseltamivir in large volume with increased reports of adverse drug reaction(ADR). The present study was aimed to investigate the ADR frequency, the factors related to ADR, and characteristics of oseltamivir's ADR. Participants for the study were patients randomly drawn from those who were prescribed oseltamivir for treatment from CHA Bundang Medical Center during October 1 and October 30. The information examined as factors related to ADR were collected by a subsequent cross-sectional telephone survey. The factors are the following; a) age; b) gender; c) patient medical history; d) diagnosis of H1N1 virus; e) adherence; f) whether taking other medication with oseltamivir or not; and g) the number of combined medications. We also asked ADR after taking oseltamivir. Total subjects were 86 patients. The average age is $22.6{\pm}18.48$ years old. The gender was 45.3% women and 54.7% men. Half (50%) of all respondents showed one or more ADR, 67.4% were positively diagnosed for H1N1 virus, and 54.7% were completed the full course of oseltamivir (i.e. twice daily x 5days). The most frequently reported ADR symptoms were: dizziness (15.1%), nausea (11.6%), lethargy (10.4%), diarrhea (10.4%), abdominal pain (8.1%), headache and vomiting (6.9%). ADR classifications by categories are gastro intestinal (44.2%), neuropsychiatric events (22.1%), systemic symptom (20.9%), skin events (5.8%), eye events (4.7%), and other cases (2.3%). The onset of ADR 'after taking 1~3 doses' was 69.7%. No increase in neuropsychiatric events was detected in children and adolescents. No factors examined for the study do have significant influence on the presence of ADR. This study showed that ADR of oseltamivir have occurred in half of the patients. The use of oseltamivir is essential for treatment and prophylaxis of influenza A(H1N1). But mass treatment should be properly monitored for ADR.