• Asian Journal of Turfgrass Science
• /
• v.10 no.1
• /
• pp.71-80
• /
• 1996

Fourteen dictyostelids(12 species of genus Dictyostelium. 2 species of genus Polysphonylium) oc-curred in Mt. Chiri Korea. Soils samples were collected from the nine sites. In the broadleaved-deciduous forests and conifers, common species of cellular slime molds are Dictyostelium mucoroides, and D. brefeldianum. Only two species are above 30 in importance value and above 50% in presence. Dominant species in the broadleaved-deciduous forests is D. mecoroides wheras in the conifer forests is D. brefeldianum which was not common until now in Korea, found in the low elevation either. In addition, Five cellular slime molds occured in the Miscanthus sinensis community: 4 species of genus Dictyostelium and 1 species of genus Polysphonylium. Dominant species is D. purpureum. Importance value is very high, 85. This Result is exceptively unusual. It dind't occur in the other sites. Correlation between the altitudes and the occurrence and distribution of dictyostelids was not accurate. Merely dominant species were different according to forest types and organic matter contents in soil. Cellular slime molds have different favorite forest types. And the growth and germination are dependent on the soil enviroryrnental conditions and soil quility. Key words:Dictyostelids, Mt. Chiri D. mecoroides, D. brefeldianum. D. purpureum. Soil quility, Favorite forest type, Soil environmental condition.

• Transactions of Materials Processing
• /
• v.24 no.6
• /
• pp.395-399
• /
• 2015

A microstructure-based finite element simulation was conducted to predict the plastic strain ratio (R-value) of a dual-phase (DP) steel. The representative volume elements (RVEs) concept was adopted for the image-based FE modeling and a 3D model was constructed using sequential 2D images. Each phase was considered with the von-Mises yield criterion and the Swift model. The Swift parameters were defined by the empirical equations based on the chemical composition. The developed model was applied to analyze the effect of residual stress on the R-value and stress distribution. In order to consider the residual stress development after cold rolling, 10 % compression was applied in the thickness direction and unloaded before the tensile stress was applied in the rolling direction. The results showed a reasonable prediction for the R-value evolution: a sharp increase at small strains was well described and a transition followed in the downward direction. The R-value evolution was analyzed using the stress distribution change on the π-plane

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.1
• /
• pp.35-43
• /
• 2015

Let q > 1 be an odd integer and c be a fixed integer with (c, q) = 1. For each integer a with $1{\leq}a{\leq}q-1$, it is clear that the exists one and only one b with $0{\leq}b{\leq}q-1$ such that $ab{\equiv}c$ (mod q). Let N(c, q) denote the number of all solutions of the congruence equation $ab{\equiv}c$ (mod q) for $1{\leq}a$, $b{\leq}q-1$ in which a and $\bar{b}$ are of opposite parity, where $\bar{b}$ is defined by the congruence equation $b\bar{b}{\equiv}1$ (modq). The main purpose of this paper is using the mean value theorem of Dirichlet L-functions to study the mean value properties of a summation involving $(N(c,q)-\frac{1}{2}{\phi}(q))$ and Kloosterman sums, and give a sharper asymptotic formula for it.

• Journal of Food Hygiene and Safety
• /
• v.38 no.5
• /
• pp.356-360
• /
• 2023

We analyzed the heat resistance of non-pathogenic Bacillus atrophaeus, Bacillus subtilis, and Geobacillus stearothermophilus spores which exhibit strong heat resistance and evaluated the possibility of using them to determine direct sterilization when manufacturing retort foods. The D₁₂₁-values of B. subtilis, G. stearothermophilus, and B. atrophaeus spores were 2.9±0.1 min, 4.3±0.1 min, and 3.7±0.1 min, respectively. The Z-values of B. subtilis, G. stearothermophilus, and B. atrophaeus spores were 43.0±1.4℃, 25.0±1.6℃, and 35.8±1.4℃, respectively. The D₁₂₁-values of B. subtilis, G. stearothermophilus, and B. atrophaeus spores were all higher than that of Clostridium botulinum spores used to confirm retort food sterilization. Considering these results, B. subtilis, G. stearothermophilus, and B. atrophaeus spores can be used instead of the pathogenic spore-forming bacteria C. botulinum when sterilizing retort food. In addition, sterilization can be confirmed in 2 to 3 days, a shorter time than the 13 days required for existing bacterial growth experiments based on the Korean food code.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.3
• /
• pp.433-437
• /
• 2005

Electron beam irradiation was applied to examine the microbial safety and qualities of sliced dried squid. Sliced dried squid was irradiated at dose of 2, 4, 8, 12, and 16 kGy. Microorganisms contaminated in sliced dried squid were significantly decreased by irradiation. Decimal reduction dose (D/sub 10/ value) of total bacteria count, yeast and mold, coliforms in sliced dried squid were 8.57, 4.60, and 8.10 kGy, respectively. Electron beam irradiation caused negligible changes in Hunter color L, a, and b value. Sensory evaluations of irradiated sliced dried squid showed that there were no significant changes among the samples. These results indicate that electron beam irradiation improves the microbial safety and qualities of sliced dried squid.

• Journal of the Optical Society of Korea
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2012

Polymethylmethacrylate powders are commonly used to improve the spreadability and blurring effects of powder foundation cosmetics. In this study, the opacity and haze effect of four types of polymethylmethacrylate powders and their 10wt% powder foundation formulation was evaluated. The distorted random hemispherical particulates with both concave and convex portions showed the highest haze and opacity value as a single powder substance. And as a formulated phase, the powder foundation formulation containing particulates with fine pores provided the highest haze and opacity value. We also examined the quantity of reflected light over the angular range $20-75^{\circ}$ by polarized light goniophotometry. The total reflected light intensity, surface-reflected light, and internally reflected light were characterized. These studies demonstrated that hemispherical PMMA powders produce natural brilliance by creating high internally reflected light which is similar to the total reflection profile of artificial skin.

• Journal of Power System Engineering
• /
• v.10 no.2
• /
• pp.22-28
• /
• 2006

Computer simulation of the air flow over an automotive vehicle is now becoming a routine process in automotive industry to assess the aerodynamic characteristics of a medium-size vehicle such as $C_d\;and\;C_1$ and aslo to investigate the possibility of improving aerodynamic performance of the vehicle as a preliminary design for the production line. Mainly due to its contribution in saving time and cost in the development of new cars, computer simulation of the air flow over a vehicle is usually done well before a production car is introduced to the market and in gaining more and more attention as powerful computer resources are getting readily available nowadays. To aerodynamically design a car is mainly related with reducing a drag coefficient of car. A well designed car usually has a $C_d$ value in the range of $0.3{\sim}0.4$. It is understandable that automotive industry is rushing to reduce a drag coefficient as reducing even a small fraction of the $C_d$ value can have an enormous overall impact on many areas. Actually, the present research model was able to achieve a $C_d$ value in the range of $0.3{\sim}0.36$ for flow velocities of $60km/h{\sim}100km/h$ by strategically removing the possible factor hazardous to lower $C_d$ value. Prediction of the medium-size vehicle aerodynamics using CFD was performed when an actual car model was in the development stage and three-dimensional modeling was also performed to optimize it as the best model in terms of the best aerodynamic performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.6
• /
• pp.825-831
• /
• 2014

The aim of this study was to determine the nutritive value of some legume species in salt-affected soils of South-East Anatolian region using chemical composition and in vitro gas production kinetics. In this study, Lotus corniculatus, Trifolium alexandrinum, Medicago sativa were sown and tested in four different locations. A 3 by 4 factorial design with 3 legume species and 4 salt levels (non salty electrical conductivity (EC)<4 dS/m; low salt: 4 dS/m>EC<8 dS/m, medium saline: 8 dS/m>EC<16 dS/m and high salt: 16 dS/m>EC) was used in the study. Results indicated that salinity and plants had no significant effect on ash and ether extract. Dry matter (DM), acid detergent fiber, digestible dry matter, dry matter intake (DMI) were affected by plant, salinity and plant${\times}$salinity interaction. On the other hand neutral detergent fiber, relative feed value (RFV), and DMI were affected by salinity and plant${\times}$salinity interaction. Mineral contents were affected by plant species, salinity and salinity${\times}$plants interactions. In vitro gas production, their kinetics and estimated parameters such as were not affected by salinity whereas the gas production up to 48 h, organic matter digestibility, metabolizable energy (ME), and net energy lactation ($NE_L$) were affected by plant and plant${\times}$salt interaction. Generally RFVs of all species ranged from 120 to 210 and were quite satisfactory in salty conditions. Current results show that the feed value of Medicago sativa is higher compared to Lotus corniculatus and Trifolium alexandrinum.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.548-554
• /
• 1985

This research is to find a means of reducing diesel engine combustion noise with none or minimum sacrifice of engine performance by investigating the influence of Cylinder Pressure Level(CPL). For this purpose, modified Wiebe's combustion function, considering the heat release curve as a combustion of both premixed and diffusive combustion portion, was exclusively used to obtain the indicator diagram and computer coeds were developed for the numerical analysis. Following are the results of this research. (1) CPL increases almostly with lag of ignition timing increasing .alpha. and decreasing. theta.$_{d}$, but at the crank angle with the maximal efficiency, CPL is independent of .alpha. and .theta.$_{d}$ with constant value of 200 dB especially at the low frequency. (2) For the constant ignition timing, the effects of .alpha. and .theta.$_{d}$ on CPL were the most significant at the frequency of about 1KHz and 300Hz respectively. (3) For the constant value of .alpha. and .theta.$_{d}$, CPL increases linearly with load but thermal efficiency increase very rapidly with maximum value of load Q$_{T}$=30-40 MJ/Kmol, then starts to decrease slowly. (4) The most effective way of reducing combustion noise without sacrificing thermal efficiency, is to decrease .alpha.. In the case of constant .alpha., there always exists a optimum value of .theta.$_{d}$ with respect to the various compression ratio.o..atio.o..

• Asia Marketing Journal
• /
• v.16 no.4
• /
• pp.19-37
• /
• 2015

Forming interfirm collaborative relationships has become a key aspect of a firm's marketing strategies to create value for customers and achieve greater firm performance. While empirical findings are mixed in previous studies, this study is an effort to identify boundary conditions for the benefits of marketing alliances. We investigate internal and environmental factors that may magnify or constrain the effect of marketing alliances on firm profitability. Given the complementary relationship between marketing and R&D activities, we focus on a firm's R&D intensity as an internal factor that may magnify the value of marketing alliances for firm performance. For environmental factors, we focus on industry turbulence and industry competitiveness. Industry turbulence refers to the degree to which industry market conditions change quickly and unpredictably, whereas industry competitiveness refers to the degree to which a firm faces competition in the industry. By testing these factors, we are intended to reveal boundary conditions that determine the value of marketing alliances for firm profitability. The analysis of firms in the diverse industries shows that while the main effect of marketing alliances on firm profitability is not significant, it becomes more positive when R&D investment is more intensive or when industry environment is more turbulent. The results of this study imply that just forming more marketing alliances may not be enough to increase firm profitability. Our findings imply that marketing alliances become more effective in a dynamically changing industry environment. That is, firms can cope with industry uncertainties more effectively by forming marketing alliances. At the same time, the moderating effect of R&D intensity implies that the internal investments in R&D magnify the effect of marketing alliances on firm profitability. The findings of this study contributes to the existing alliance literature in three aspects. First, this study enhances our understanding of the contingent value of marketing alliances by testing both internal and external factors that may influence the effectiveness of marketing alliances. Second, this study responds to the need for research that investigates actual performance resulting from interfirm relationships. Third, while previous studies primarily focused on a specific industry, this study extend previous findings of the boundary conditions for the benefits of marketing alliances in a broader context.