• 제목/요약/키워드: $DO_3$ phase

검색결과 890건 처리시간 0.024초

Fe-Si-Cr 분말합금의 열처리 효과 (Effects of Annealing of Gas-atomized Fe-Si-Cr Powder)

  • 장평우
    • 한국자기학회지
    • /
    • 제26권1호
    • /
    • pp.7-12
    • /
    • 2016
  • 전기비저항이 높아 1 MHz 이상 고주파용 코어재료로 적합한 Fe-9%Si-2%Cr 합금분말의 열처리 온도에 따른 투자율 거동과 규칙-비규칙 전이에 대해 연구하였다. 분무과정에서 B2 규칙상의 생성이 억제되지 않았으며, $550^{\circ}C$ 이상에서 열처리 했을 경우 $DO_3$ 상의 회절선을 검출할 수 있었다. 열처리 온도가 증가할수록 격자상수와 보자력은 감소하였으나 $450^{\circ}C$에서 보자력의 갑작스런 큰 증가가 있었다. $150^{\circ}C$의 비교적 낮은 열처리 온도에서 가장 높은 투자율을 나타내었고, 이후 열처리 온도가 증가할수록 투자율은 감소하였다. 이상의 거동은 $DO_3$ 규칙상의 생성과 이에 따른 비저항의 변화로 설명할 수 있었다.

DO농도 조절에 따른 황 충전 섬모상 반응조의 질소제거 성능 변화 (Nitrogen Removal Performance at Various DO Concentrations in the Bioreactor Packed with Submerged Cilia Media and Granular Sulfur)

  • 문진영;황용우
    • 상하수도학회지
    • /
    • 제20권4호
    • /
    • pp.519-526
    • /
    • 2006
  • In this study, the major operating factors in SND(simultaneous nitrification and denitrification) using bioreactor packed with submerged cilia media and granular sulfur such as variation of nitrification rate, organic matter removal efficiency and denitrification efficiency in different DO concentration were mainly evaluated. Synthetic wastewater and actual sewage were used as influent wastewater. Experiment with synthetic wastewater as influent wastewater was divided into three phases with the adjustment of DO concentration. As the results, nitrification efficiency and T-N removal efficiency in the Phase 3(DO 1.0~2.0 mg/L) were 99% and 52.3%, which is significantly greater than those in other two phases. Also, loading rate and denitrification efficiency of SCPGS(Submerged Cilia media Packed with Granular Sulfur) were calculated as $0.44kg\;NO_3^--N/m^3-day$ and 50%, respectively. On the other hand, nitrification rate was decreased from 99% to 64% according to the DO concentration with the variation from 3.0~3.5 mg/L(phase1) to 0.4~0.6mg/L(phase2). Although the nitrification rate was decreased in 64% according to the variation of the DO concentration, T-N removal rate was rapidly increased to 49% by increasing of the denitrification efficiency. Experiment with actual sewage as influent wastewater was carried out to evaluate efficiency of SCPGS in real operation condition of full-scale sewage water treatment plant. At the time, T-N removal rate in this experiment and full-scale wastewater treatment plants were given by 43% and 20%, respectively. The above results indicate that SCPGS can be used as an advanced treatment process for economical efficiency considered.

한국 조산원 개원실태 및 조산직무지침 개발 (Opening Status of the Korea Midwifery Birthing Centers and Development of Midwifery Practice Guideline)

  • 송지영;박영주
    • 대한간호학회지
    • /
    • 제50권4호
    • /
    • pp.583-598
    • /
    • 2020
  • Purpose: This study was to investigate the operational status of the midwifery birthing centers (MBCs) and midwives' job status (Phase 1) and to develop midwifery practice guidelines (MPG) (Phase 2) in Korea. Methods: In the first phase, the subjects were 15 midwives who operated 11 of 14 MBCs that were opened as of August 2018. The questionnaire consisted of items to measure the operational status of the MBC and midwives' job status. In the second phase, the MPG was developed from literature review, interviews with five midwives opening their MBCs, surveys with 74 midwives, and a validity evaluation conducted by seven experts. Results: The distribution of operating MBCs was five in Gyunggi-do, two each in Seoul and Incheon, one each in Busan, Chungcheongbuk-do, Gyeongsangbuk-do, Gyeongsangnam-do and Jeju-do. The mean age of midwives was 54.3 and all were female. In 2017, a total of 762 births including 81 homebirths were performed by midwives. The job performance was highest in the order of neonatal care 3.81, childbirth care 3.56, and postpartal care 3.53, respectively. The MPG included seven areas of prenatal care, childbirth care, postpartal care, neonatal care, primary health care, law/ethics, and administration, with 56 tasks and 166 task elements. Conclusion: This study provides the valid basic data for the operational status of the MBC and the midwives' job status. The MPG describes the midwife's job and may be used as basic data for preparing policies for the development of midwifery practice in Korea.

옵셋전압입력원리를 이용한 2상 인버터의 PWM 방식과 3상 인버터의 PWM 방식의 비교 (PWM Control Method for Two-Phase Inverter Using Offset Voltage Inserting Concept Comparing for its Method of three-Phase Inverter.)

  • 장도현
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2014년도 전력전자학술대회 논문집
    • /
    • pp.498-499
    • /
    • 2014
  • 본 논문에서는 3상 PWM 옵셋전압방식을 응용하여 2상 인버터에 대한 PWM 제어방식을 확립하였다. 또한 기존의 3상 PWM 인버터 옵셋전압방식과의 최대 전압영역과 비교 분석하였다.

  • PDF

New Unsupervised Classification Technique for Polarimetric SAR Images

  • Oh, Yi-Sok;Lee, Kyung-Yup;Jang, Ge-Ba
    • 대한원격탐사학회지
    • /
    • 제25권3호
    • /
    • pp.255-261
    • /
    • 2009
  • A new polarimetric SAR image classification technique based on the degree of polarization (DoP) and the co-polarized phase-difference (CPD) is presented in this paper. Since the DoP and the CPD of a scattered wave provide information on the randomness of the scattering and the type of scattering mechanisms, at first, the statistics of the DoP and CPD are examined with measured polarimetric SAR image data. Then, a DoP-CPD diagram with appropriate boundaries between six different classes is developed based on the SAR image. The classification technique is verified using the JPL AirSAR and ALOS PALSAR polarimetric data. The technique may have capability to classify an SAR image into six major classes; a bare surface, a village, a crown-layer short vegetation canopy, a trunk-layer short vegetation canopy, a crown-layer forest, and a trunk-dominated forest.

준결정상을 포함한 Mg-Zn-Y 합금의 기계적 특성 및 부식 저항성 (Mechanical Property and Corrosion Resistance of Mg-Zn-Y Alloys Containing Icosahedral Phase)

  • 김도형;김영균;김원태;김도향
    • 대한금속재료학회지
    • /
    • 제49권2호
    • /
    • pp.145-152
    • /
    • 2011
  • Mechanical and property corrosion resistance of Mg-Zn-Y alloys with an atomic ratio of Zn/Y of 6.8 are investigated using optical microscopy, scanning electron microscopy, transmission electron microscopy, uniaxial tensile test and corrosion test with immersion and dynamic potentiometric tests. The alloys showed an in-situ composite microstructure consisting of ${\alpha}$-Mg and icosahedral phase (I-phase) as a strengthening phase. As the volume fraction of the I-phase increases, the yield and tensile strengths of the alloys increase while maintaining large elongation (26~30%), indicating that I-phase is effective for strengthening and forms a stable interface with surrounding ${\alpha}$-Mg matrix. The presence of I-phase having higher corrosion potential than ${\alpha}$-Mg, decreased the corrosion rate of the cast alloy up to I-phase volume fraction of 3.7%. However further increase in the volume fraction of the I-phase deteriorates the corrosion resistance due to enhanced internal galvanic corrosion cell between ${\alpha}$-Mg and I-phase.

횡방향 주사를 이용한 광위상 간섭계의 페이즈 언래핑 향상에 대한 연구 (Phase unwrapping enhancement of phase shift interferometry by using lateral scanning)

  • 박도민;박성림;권대갑
    • 대한기계학회논문집A
    • /
    • 제22권3호
    • /
    • pp.684-687
    • /
    • 1998
  • The biggest problem common on to all forms of Phase Shift Interferometer is unwrapping the phase. Simple phase unwrapping algorithms assume that every pixel is within radians of its neighbors. If this is true, any reasonable algorithm will return the correct unwrapped phase. If not, correct unwrapped phase will not be obtained. In rough surface, frequently, neighboring pixels have phase steps greater than. This paper proposes the new method which makes phase steps smaller than by sub-pixel movement.

자동동기장치 성능평가를 위한 3상 정밀파형발생기 개발 (3-Phase High Precision Sinusodial Signal Generator for Performance Measure of Autosyncronizer)

  • 정태진;차영호;박호철;천영식;정찬수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
    • /
    • pp.478-480
    • /
    • 1998
  • We develops a simulator to evaluate the performance of the autosyncronizer. The autosyncronizer is used to automatically syncronize magnitude, frequency, and phase of 3 phase signals of generator with respect to those of the utility grid. This autosyncronizer needs to be evaluated its performance to prevent malfunctions. To do this, 3 phase signals of generator and the utility grid are simulated and signals of the generator should be changed by ouput of the autosyncronizer with high precision. In this paper, we uses TMS320C31 to generate high precision sinusoidal 3 phase signals using Table Lookup method. In this process, it is very desirable to control magnitude, frequency, and phase of the signal with high precision and this is achieved by appropriate interpolation method. The resulted signal is well controlled and has low THD and could be used to evaluate the performance of the autosyncronizer.

  • PDF

2상 유도전동기 구동 2상 인버터를 위한 새로운 PWM제어방식 II - 3-레그 타입의 경우 - (A Novel PWM Method for Three-Leg Two-Phase Inverter Fed Two-Phase Induction Motor)

  • 장도현
    • 전력전자학회논문지
    • /
    • 제10권4호
    • /
    • pp.339-346
    • /
    • 2005
  • 본 논문에서는 3-레그 2상 인버터의 새로운 PWM방식을 제안하였다. 기존의 3-레그 인버터의 PWM방식은 전형적인 SVPWM 방식을 적용하여 PWM 방식이 복잡하다. 3-레그 2상 인버터를 "중성점이 있는 4-레그 인버터"의 등가회로라고 할 때 3-레그 인버터에서 형성되는 6개의 섹터는 4개의 섹터로 축소되며, 각 영역에서는 SYPWM 방식 대신 단순화된 정현파형 PWM방식을 적용할 수 있다. 각 레그의 스위치마다 스위칭 시간을 계산하는 스위칭 패턴을 제시하였다. 제안된 ,3-레그 인버터의 PWM방식에 대한 타당성을 확인하기 위해 모의 실험과 실험이 실행되었다.

3상 4선식 저압 수용가의 전압 불평형율 측정분석 (The measurement & Analysis of Voltage Unbalance Factor at LV Customer of Three-Phase Four-Wire System)

  • 김종겸;박영진;이은웅
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2004년도 춘계학술대회 논문집
    • /
    • pp.43-47
    • /
    • 2004
  • Most of LV customer has been composed the 3-phase four wire system distribution system which is supplying simultaneously at the 1-phase & 3-phase load. In this system, the composition of the power apparatus system is simple rather than conventional separation mode of the 1-phase & 3-phase, But due to uneven load unbalance or unclean power quality, various kinds such as do-rating or power losses become an issue. In this paper, we measured and analyzed voltage and current waveform in the field, compared with internationally allowable voltage unbalance limits.

  • PDF