• 한국재료학회지
• /
• 제5권5호
• /
• pp.583-597
• /
• 1995

We investigated the effect of the oxygne partial pressure on the phase stability of B $i_{2}$S $r_{2}$Ca C $u_{2}$ $O_{8+x}$ and B $i_{2}$S $r_{2}$C $a_{2}$C $u_{3}$ $O_{10+x}$ at 82$0^{\circ}C$. As the oxygen pressure decreased, B $i_{2}$Sr/sb 2/CaC $u_{2}$ $O_{8+x}$ melted at 2.2$\times$10$^{-3}$ atm $O_{2}$. In the case of the B $i_{1.7}$P $b_{0.4}$S $r_{2}$C $a_{2}$ $O_{10+x}$, it started to decompose into theree phases of B $i_{2}$S $r_{2}$Cu $O_{6+y}$, $Ca_{2}$Cu $O_{3}$ and C $u_{4}$ $O_{3}$ and C $u_{4}$ $O_{3}$ at 8.0$\times$10$^{-3}$ atm $O_{2}$ and was completely decomposed at 4.3$\times$10$^{-3}$ atm $O_{2}$ B $i_{2}$S $r_{2}$C $a_{2}$C $u_{3}$ $O_{10+x}$ phase was not formed by the solid state reaction from the mixutre of $i_{2}$S $r_{2}$CaCu.sub 2/ $O_{8+x}$, $Ca_{2}$Cu $O_{3}$ and CuO down to 2.2$\times$10.sub -3/ atm O.sub 2/ but formed by the solidifciation of the formed from the mixture of the intermediate compounds in the Bi-Sr-Ca-Cu-O system and the fromation temperature of Bi.sub 2/S $r_{2}$C $a_{2}$Cu.$_{3}$ $O_{10+x}$ can be lowered by reducing oxygen partial pressure.e.e.ure.e.e.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.148-156
• /
• 1994

$YBa_2Cu_3O_X$상 부근의 3가지 조성을 skull melting 방법으로 4MHz에서 녹인 후 방향적 결정성장을 시켰다. 일반적인 무기재료 공정방법으로 처리된 분말을 skull에 넣은 후 $1200^{\circ}C$부근에서 용융시켰다. 사용한 성장속도는 4~0.25 cm/hr이었으며, 금속현미경, X-선 회절기, EDX 등을 이용해서 제조된 시편을 조사하여 사용한 분말의 조성에 따른 시편의 미세조직의 변화를 관찰하였다. $YBa_2Cu_7O_X$와 $YBa_5Cu_{11}O_X$ 시편의 대표적인 미세조직은 성장방향으로 자라난 침상형태의 $YBa_2Cu_3O_X$와 $Y_2BaCuO_5$ 상이 $CuO-BaCuO_2$의 공융 조직상 사이에 생성된 것으로 나타났다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1995년도 추계연구발표회 논문개요집
• /
• pp.98-99
• /
• 1995

• 한국광물학회지
• /
• 제4권1호
• /
• pp.43-50
• /
• 1991

四成分系 Cu-Fe-Sn-S 시스템의 相關係에 대한 합성실험에서 두 개의 固溶體 타입의 合成相$(Fe, Cu, Sn)_{1+x}S$와 $Cu_{2-y}Fe_{1+y}SnS_4$가 발견되었으며 이들은 成分四面體 내에서 CuS-FeS-SnS로 표시될 수 있는 reference面의 주위에서 안정한 것으로 밝혀졌다. 煎者는 섬아연석 結晶構造를 갖고 있는 단순황화물 고용체로서 온도함수인 금속과 유황의 비율(9.7-1.0/1.0)에 따라 광범위한 화학적 안정영역을 차지하고 있다. 또산 섬아연석 超格子중에 하나인 테트라헤드라이트 結晶構造를 갖고 있는 후자는 $Cu_2FeSnS_4$-FeS conode를 따라 렌즈型의 안정범위를 갖으나 subsolidus 범위(350${\circ}C$까지) 내에서 相轉移 현상이 없고 835-862${\circ}C$에서 不調和熔融을 한다. 위 두 개의 고용체는 온도변화에 따라 相互溶解度 그리고 관련된 각각의 합성상이 화학조성이 변화하는 소위 Incorporation-type Solid Solution이다. 특히 後者의 경우 섬아연석 subcell을 기본골격으로 하는 超格子의 특징적인 양상을 X-ray 연구에서 찾을 수 있으며 이 패턴을 초격자의 안전성이 높다는 것을 암시해 주고 물리, 화학적 특성이 stoichiometric phase $Cu_2FeSnS_4$와 相異하다.

• 한국결정성장학회지
• /
• 제13권4호
• /
• pp.172-175
• /
• 2003

We have investigated effects of the lattice mismatch between the LPE films and the substrates. We have grown $La_{2-x}Sr_{x}CuO_{4}$(x=0.1 to 0.15) single crystalline films on single crystalline substrates having different lattice parameter ratio c/a e.g., $La_{2-x}Sr_{x}Cu_{1-y}Zn_{y}O_{4},\;La_{2-x}Ba_{x}CuO_{4},\; LaSrAlO_{4}\;and\;La_{2-x}Sr_{x}Cu_{1-y}Al_{y}O_{4}$ etc., using the IR-LPE technique. The superconducting properties of the grown films were found to vary significantly depending on the lattice mismatch with different substrates.

• 한국자기학회지
• /
• 제12권5호
• /
• pp.184-188
• /
• 2002

수직자기이방성을 가지는 Cu/Ni/Cu(002)/Si(100) 자성박막을 전자빔 증발법을 이용하여 초고진공에서 증착 하였다. 증착 시 RHEED로 측정 한 결과 실리콘 기판 위에 자성박막이 적층성장되었음을 확인하였다. 이러한 Cu/Ni/Cu(001)/Si(100) 자성박막에 1 MeV C 이온을 이온선량 2$\times$$10^{16}$ ions/$\textrm{cm}^2$로 조사한 후 MOKE로 자기이력곡선을 측정한 결과 이온 조사에 의해 자화용이축이 수직에서 수평방향으로 변화되었음을 확인하였다 포항 방사광가속기를 이용하여 X-선 반사도와 Grazing Incident X-ray diffraction(GE) 분석을 수행한 결과 첫 번째 Cu층과 Ni층 사이의 계면은 이온 조사 후 거칠기는 증가하였으나, Cu와 Ni의 전자밀도의 대비는 더욱 명확해졌다. 그리고, 증착 후 Cu와 Ni원자의 격자 상수 차이에 의해 Ni층이 가지고 있었던 strain은 이온 조사 후 완화되었음을 알 수 있었다. 끝으로, 이온조사 시 자성특성 변화와 직접적인 관계가 있는 strain 완화, 계면 혼합층(혹은 새로운 상)등이 생성되는 기구를 탄성충돌 및 비탄성충돌에 의한 열화학적 구동력으로 규명하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1584-1586
• /
• 2002

CuIn$Se_2$ (CIS) and related compounds such as Cu($In_xGa_{1-x})Se_2$(CIGS) have been studied by their potential for use in photovoltaic devices. CIS thin film materials which have high absorption coefficient and wide bandgap, have attracted much attention as an alternative to crystalline and amorphous silicon solar cells currently in use. Cu-rich CIGS film have very low resistivity, due to coexistence of the semimetallic $Cu_{2-x}Se$. In-rich CIGS films show high resistivity, since these films are compensated films without the $Cu_{2-x}Se$ phase. Optical properties of the CIGS films also change in accordance with the resistivity for the Cu/(In+Ga) ratio. The Cu-rich films have different spectra from In-rich films in near infrared wavelengths.

• Current Photovoltaic Research
• /
• 제5권1호
• /
• pp.20-24
• /
• 2017

Recently, three-dimensional (3D) light harvesting structures are highly attracted because of their high light harvesting capacity and charge collection efficiencies. In this study, we have fabricated $Cu_2ZnSn(S_xSe_{1-x})_4$ based 3D thin film solar cells on PR patterned Molybdenum (Mo) substrates using photolithography technique. Specifically, Mo patterns were deposited on PR patterned Mo substrates by sputtering and the thin Cu-Zn-Sn stacked layer was deposited over this Mo patterns by sputtering technique. The stacked Zn-Sn-Cu precursor thin films were sulfo-selenized to form CZTSSe pattern. Finally, CZTSSe absorbers were coated with thin CdS layer using chemical bath deposition and ZnO window layer was deposited over CZTSSe/CdS using DC sputtering technique. Fabricated 3-D solar cells were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF) analysis, Field-emission scanning electron microscopy (FE-SEM) to study their structural, compositional and morphological properties, respectively. The 3% efficiency is achieved for this kind of solar cell. Further efforts will be carried out to improve the performance of solar cell through various optimizations.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.414-423
• /
• 2016

In the present study, the $CuN_x-Cu-CuN_x$ layer the partial pressure ratio Cu metal of Ar and $N_2$ gas using a DC magnetron sputtering device, was generated by the In-situ method. $CuN_x$ layer was able to obtain a surface reflectance reduction effect from the advantages of the process and the external light. $CuN_x$ layer is gas partial pressure, DC the Power, the deposition time variable transmittance in response to the thickness and partial pressure ratio, the reflectance was measured. $Ar:N_2$ gas ratio 10:10(sccm), DC power 0.35 A, was derived Deposition time 90 sec optimum conditions. Thus, according to the optimal thickness and the composition ratio was derived surface reflectance of 20.75%. In addition, to derive the value of ${\Delta}$ Ra surface roughness of 0.467. It was derived $CuN_x$ band-gap energy of about 2.2 eV. Thus, to ensure a thickness and process conditions can be absorbed to maximize the light in a wavelength band in the visible light region. As a result, the implementation of the $12k{\Omega}$ base line resistance of using the Cu metal. This is, 5 inch Metal mesh TSP(L/S: $4/270{\mu}m$) is in the range of the reference operation.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권3호
• /
• pp.1-4
• /
• 2018

The effect of sulfate substitution on the formation of (Pb,S)-1201 type phase was investigated. Polycrystalline samples with nominal compositions of $(Pb_{0.5}B_{0.5-x}S_x)(Sr_{2-y}La_y)CuO_z$, (x = 0 - 0.5, y = 0.7 - 1.0) and $(Pb_{0.5}S_{0.5})(Sr_{2-y}La_y)CuO_z$ (y = 0.5 - 1.0) were prepared by using a solid-state reaction method. The samples were characterized by powder X-ray diffraction (XRD) and resistivity measurements. XRD data revealed that almost-single (Pb,S)-1201 phase samples could be obtained for x = 0.5 and y = 0.9-1.0, judging from the similar results of the XRD patterns between the (Pb,S)-1201 and (Pb,B)-1201 phases. Each of the samples has a crystal structure with tetragonal symmetry. The sample with x = 0.5 and y = 0.9 is found to show an onset of resistivity dropping at over 23 K and zero resistivity at 12 K.