• Journal of Microbiology
• /
• v.44 no.6
• /
• pp.622-631
• /
• 2006

In this study we purified a fibrinolytic enzyme from Cordyceps militaris using a combination of ion-exchange chromatography on a DEAE Sephadex A-50 column, gel filtration chromatography on a Sephadex G-75 column, and FPLC on a HiLoad 16/60 Superdex 75 column. This purification protocol resulted in a 191.8-fold purification of the enzyme and a final yield of 12.9 %. The molecular mass of the purified enzyme was estimated to be 52 kDa by SDS-PAGE, fibrin-zymography, and gel filtration chromatography. The first 19 amino acid residues of the N-terminal sequence were ALTTQSNV THGLATISLRQ, which is similar to the subtilisin-like serine protease PR1J from Metarhizium anisopliae var. anisopliase. This enzyme is a neutral protease with an optimal reaction pH and temperature of 7.4 and $37^{\circ}C$, respectively. Results for the fibrinolysis pattern showed that the enzyme rapidly hydrolyzed the fibrin $\alpha$-chain followed by the $\gamma$-$\gamma$ chains. It also hydrolyzed the $\beta$-chain, but more slowly. The A$\alpha$, B$\beta$, and $\gamma$ chains of fibrinogen were also cleaved very rapidly. We found that enzyme activity was inhibited by $Cu^{2+}$ and $Co^{2+}$, but enhanced by the additions of $Ca^{2+}$ and $Mg^{2+}$ ions. Furthermore, fibrinolytic enzyme activity was potently inhibited by PMSF and APMSF. This enzyme exhibited a high specificity for the chymotrypsin substrate S-2586 indicating it's a chymotrypsin-like serine protease. The data we present suggest that the fibrinolytic enzyme derived from the edible and medicinal mushroom Cordyceps militaris has fibrin binding activity, which allows for the local activation of the fibrin degradation pathway.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.366-370
• /
• 1989

A new macrocyclic ligand 1,15,18-triaza-3,4;12,13-dibenzo-5,8,11-cycloeicosane (NdienOdien$H_4$ = $N_3O_3$) has been synthesized and identified by element analysis, NMR and IR spectrophotometry. Stepwise protonation constants of ligand are determined by potentiometry in 95% methanol solution(I = 0.1 mol $dm^{-3}$, $Me_4$NCl). log $K_1$;log $K_2$;log $K_3$ = 9.1;8.1;3.6.The kinetics of the acid-promoted dissociation reactions of complex cations of nickel(II) and copper(III) with NdienOdien and NdienOen macrocyclic ligands having, respectively, 17 and 20 ring members, have been studied spectrophotometrically in HCl$O_4$ NaCl$O_4$ aqueous solutions. From the temperature effect on kinetic constant ($k_{obs}$), the parameters of activation(${\Delta}H^{\neq}$, ${\Delta}S^{\neq}$) of dissociation reaction for $ML^{2+}$ with $H^+$ ion have been determined. We have proposed the possible mechanism of the reaction from the data obtained.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.196-196
• /
• 2016

치과나 기공소로부터 높은 원가로 인한 재료선택에 어려움을 겪고 있어 귀금속 금합금의 물성을 가질 수 있도록 하면서 가격급등으로 인한 문제 해결하기 위한 비귀금속 합금으로 대체가 필요하기에 이에 따른 연구가 이루어져 국산 제품의 상품화를 위해 파라듐을 이용하여 적합한 새로운 합금을 개발하는 것이 필요하다. 치과용 골드합금은 미국치과의사 협회의 구정에 의하면 1형부터 4형까지 분류하고 있으며 3형에 해당하는 강도와 기계적인 특성을 갖도록 파라듐으로 대체하는 연구가 진행중이거나 시판되고 있다. 따라서 본 연구에서는 2형, 3형 및 4형을 대체가능하도록 팔라듐을 기반으로 한 새로운 합금을 설계하고 합금의 성분원 소인 Au(1~5), Pd(20~25), Ag(70~75), In(1.5) 및 Zn(2)등으로 조성을 변화시켜 측량 후 합금을 제조하기 위하여 아르곤 분위기하의 진공아크용해로를 이용하여 용해하였다. 정량된 금속을 진공아크 용해로에 장입하고 용해는 균질한 합금이 되도록 최소한 6회 이상 용융을 실시하며 합금성분의 손실이 발행하지 않도록 보정을 하였다. 합금의 미세조직 관찰을 위하여 샘플을 고속 다이아몬드 정밀 절단기(Acculom-5, STRUERS, Denmark)를 이용하여 절단한 후 2000 grit의 Sic 연마지에서 단계적으로 $0.3{\mu}m$ 알루미나 분말까지 연마한 후 초음파 세척을 하였다. 준비한 시편은 KCN과 $(NH_4)_2S_2O_8$을 1:1로 혼합한 부식액으로 에칭한 후 OM과 SEM을 이용하여 조직을 관찰하였으며 각 샘플의 성분변화는 EDS 분석을 통해 확인하고 결정구조는 XRD를 사용하여 분석하였다. 경도시험은 비커스경도시험기를 이용하여 5kg의 하중을 30초간 작동시켜 압흔을 연결된 micron으로 평균값을 측정하였다. 각 시편의 부식거동은 POTENTIOSTAT(Model PARSTAT 2273, EG&G, USA)을 이용하여 구강 내환경화 유사한 $36.5{\pm}1^{\circ}C$의 0.9% NaCl에서 실시하였다. 인가전위는 -1500mV에서 1000mV까지 1.67 mV/min의 주사속도로 인가하여 시험을 수행하였으며 분극곡선으로부터 부식전위와 부식전류밀도 및 부동태영역의 전류밀도로 금속의 용출거동을 조사하였으며 부식이 끝난 시편은 FE-SEM과 EDS를 사용하여 조사하였다. 기계적인 특성은 Pd-Ag에 3wt%의 Au를 첨가한 합금이 Pd-Ag에 1.5wt%합금을 첨가한 경우에 비하여 기계적인 특성이 증가하고 내식성이 크게 증가하였다. 이들 합금에 Cu를 11wt%를 첨가한 경우는 비커스경도가 200이상으로 높게 나타났지만 내식성이 크게 감소하였다.

• Microbiology and Biotechnology Letters
• /
• v.28 no.3
• /
• pp.152-155
• /
• 2000

Cultural Conditions for the Improvement in Gibberellic Acid Productivity by a Mutant of Gibberellafujikuroi ATCC 12616-Gibberella fujikuroi G-36 . Dh, Young-Jun. Department of Food and Biotechnolog}'r Dongshm Umversity, Naju 520-714, Korea - A mutant Gibberella jujih/roi G- 36 was selected by metagenesis of G/bberella fitjikuroi ATCC 12616 with mutagens such as N-methy1-N'~nitro~N"nitrosoguanidine and hydroxylamine for improving productivity of gibberellic acid. The mutant strain produced gibberellic acid (70 mg/l) more than that of wilde type. A fermentation medium containing glucose, $NH_4N0_3$, $MgS0_4$, $KH_2P0_4$ and trace elements was deve]oped for the maximal production of a gibberellic acid by the mutanL The Guctuating cultural temperature that was vaded from 300e to 20DC resulted in higher GA yield than that of fixed cu1tura] temperature at $28^{\circ}C$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.11 s.242
• /
• pp.1229-1238
• /
• 2005

The objective of the present study was to investigate the efficacy of physical water treatment (PWT) technologies using different catalytic materials and an electronic anti-fouling device in the mitigation of mineral fouling in a once-through flow system with mini-channel heat exchanger. Effects of flow velocity and water hardness on the effectiveness of PWT technologies were experimentally studied. The artificial water hardness varied from 5.0 to 10 mo1/m$^{3}$ as CaCO$_{3}$. For 10 mo1/m$^{3}$ solution, fouling resistance reduced by 13-40$\%$ depending on flow velocity and types of PWT devices. On the other hand, fouling resistance reduced by 21-29$\%$ depending on the PWT devices for 5 mo11m3 solutions. The PWT device using alloy of Cu and Zn as catalyst (CM2) was slightly more effective than the others. SEM photographs of scale produced from the 10 mol/m$^{3}$ solution at 1.0 m/s indicated that calcium carbonate scales without PWT devices were needle-shaped aragonite, which is sticky, dense and difficult to remove. Scales with the PWT devices showed a cluster of spherical or elliptic shape crystals. Both the heat transfer test results and SEM photographs strongly support the efficacy of PWT technologies using catalytic materials and an electronic anti-fouling device in the mitigation of mineral fouling.

• Analytical Science and Technology
• /
• v.37 no.1
• /
• pp.63-78
• /
• 2024

The continuous increasing of the global demand of copper and nickel metals raises the interest in developing alternative technologies to produce them from copper sulfide ore. Also, in line with Egypt's vision 2030 for achieving the sustainable socioeconomic development which aims at developing alternative and eco-friendly technologies for processing the Egyptian ores to produce these strategic products instead of its importing. These metals enhance the advanced electrical and electronic industries. The current work aims at investigating the recovery of copper and nickel from Abu Swayeil copper ore using pug leaching technique by sulfuric acid. The factors affecting the pug leaching process including the sulfuric acid concentration, leaching time and temperature have been investigated. The copper ore sample was characterized chemically using X-ray fluorescence (XRF) and scanning electron microscope (SEM-EDX). A response surface methodology develops a quadratic model that expects the nickel and copper leaching effectiveness as a function of three controlling factors involved in the procedure of leaching was also investigated. The obtained results showed that the maximum dissolution efficiency of Ni and Cu are 99.06 % and 95.30%, respectively which was obtained at the following conditions: 15 % H₂SO₄ acid concentration for 6 hr. at 250 ℃. The dissolution kinetics of nickel and copper that were examined according to heterogeneous model, indicated that the dissolution rates were controlled by surface chemical process during the pug leaching. The activation energy of copper and nickel dissolution were 26.79 kJ.mol^-1 and 38.078 kJ.mol^-1 respectively; and the surface chemical was proposed as the leaching rate-controlling step.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.2
• /
• pp.76-90
• /
• 2018

To determine the distribution of mercury (Hg) in the coastal surface sediments around the Korean peninsula, the baseline concentration of Hg was estimated, the extent of contamination was assessed, and the factors controlling the distribution were discussed. The concentrations of Hg in surface sediments were significantly high in Jinhae-Masan Bay in the South Sea, Ulsan-Onsan Bay and Yeongil Bay in the East Sea, but Hg in other sediments showed a similar distribution to Cs and relatively very low concentration between 0.21 and $39.5{\mu}g/kg$ ($13.6{\pm}7.80{\mu}g/kg$). Compared to the sediment quality guidelines in Korea, 8 % of the surface sediments (n=282) analyzed in this study exceeded the values of the threshold effects level (TEL), and six sediments collected around Onsan Port were higher than the value of the probable effects level (PEL). The contamination levels of Hg were assessed by the enrichment factors using the baseline concentration (2.06Cs+1.75) based on the residual analysis from the linear regression line for Cs, and further, factors controlling the distribution of Hg were discussed by the comparison with geochemical substances depending upon the Hg enrichment level. Hg concentrations were correlated well with Cs concentration in the range of less than 1.69 of EF implying grain size control, while in the range of 1.69 and 4.03 Hg concentrations were correlated well with Fe oxyhyroxide and organic carbon contents, which indicates Hg was enriched by superior sorption capability. On the meanwhile, samples with higher EFs (4.03 to 74.9) showed fairly positive correlations with other metals (Cu, Zn, Pb) rather than geochemical substances. For samples in Youngil Bay and Ulsan-Onsan Bay (n=30), Hg concentrations were correlated only with other metals rather than geochemical substances implying simultaneous supply of metal particles from metal refineries. But samples at Gosung, Sokcho and Uljin coast were correlated well with organic carbon even though they had high EFs. In addition, samples in Jinhae-Masan Bay with high contents of S were enriched by relatively high sulfide formation.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.23-28
• /
• 2004

We utilized Ag capping layer for fluxless bonding. To investigate the effect of Ag capping layer, two sets of sample were used. One set was bare In and Sn solders. The other set was In and Sn solders with Ag capping layer. In ($10{\mu}m$) and Sn ($10{\mu}m$) solders were deposited on Cu/Ti/Si substrate using thermal-evaporation, and Ag ($0.1{\mu}m$) capping layers were deposited on In and Sn solders. Solder joints were made by joining two In and Sn deposited specimens at $130^{\circ}C$ for 30 s under 0.8, 1.6, 3.2 MPa using thermal compression bonder. The contact resistance was measured using four-point probe method. The shear strength of the solder joints was measured by the shear test of cross-bar sample in the direction. The microstructure of the solder joints was characterized with SEM and EDS. In and Sn solders without Ag capping layers were only bonded at $130^{\circ}C$ under high bonding pressure. Also the shear strength of the In-Sn solder joints under was lower than that of the Ag/In-Ag/Sn solder joints. The resistance of the solder joints was $2-4\;m{\Omega}$ The solder joints consisted of In-rich phase and Sn-rich phase and the intermixed compounds were found at the interface. As bonding pressure increased, the intermixed compounds formed more.

• Journal of Korean Academy of Nursing
• /
• v.22 no.4
• /
• pp.620-635
• /
• 1992

This study identified correlations between perceived family support and hopelessness in patients admitted to Neuro - surgical Intensive Care Units. The purpose was to enhance theoretical understanding of the relationships of these two variables. The subjects of this study were 51 patients admitted to N-lCU, at three general hospitals in Seoul. Data were collected by researcher in structured interviews from Aug. 12 to Oct. 13, 1992. The research tools were parts of the Moos Family Environment Scale and the Beck Hopelessness Scale. The general characteristic data were analyzed for frequency and percentage ; the hypothesis was tested by the pearson product Moment Correlation Coefficient. After normality tests by using Kolmogorov - Sminorvtest, and T- test, ANOVA and Mann-Whitney U test, Kruskal -Wallis test were used on the Family Support and the Hopelessness about general charcteristics. The results of the above analysis were as follows 1) The average family support score for the group was 63.61 (tool average 51) and item average was 3.74 (tool item average 3) : the family support score of this sample was higher than average. The average family cohesion score of family support was 35.25 (tool average 27) and item average was 3.91 (tool item average 3). The average family expression score of family support was 28.35 (tool average 24) and item average was 3.57 (tool average 3). In this sample, perceived family expression was lower than family cohesion. 2) The average hopelessness score was 45.88 (tool average 60) and item average was 2.29 (tool item average 3) : the hopelessness score of this sample was low in comparison to the average. 3) The hypothesis in this study was supported. The main hypothesis that the higher the perceived family support level, the lower the level Of the hopelessness, was Supported (r＝-.3869 p＝.003). The sub-hypothesis that the higher the perceived family cohesion level, the lower the level of hopelessness, was supported(r＝-.3688 p＝.004). The sub-hypothesis that the higher the perceived family expression level, the lower the level of hopelessness, was supported (r＝-.3068 p＝.014). 4) General characteristics of the objects related to family support were ‘economic status’(p＝.025) and ‘helping person’(P＝.044) : the higher the economic status, the greater the family support. When the patient identified the helping person as a spouse, family support was rated more highly. The only general characteristic related to family cohesion was ‘helping person’(p＝.041). No general characteristics were related to family expression. 5) The one general characteristic related to hopelessness was ‘education’(p＝.002) : the higher their education, the lower their hopelessness. For these ICU patients, were related perceived family support and hopelessness, and family expression level was low in comparison to family cohesion level. The perceived family support of these seriously ill patients in situational crisis may have influenced the patient's emotional reaction of hopelessness. This study concluded that nurses in the ICU confirm the family support of the patient, and involve the family as the most intimate support systems in the care of the patient to help reduce the patient's hopelessness.

• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.233-239
• /
• 2004

This research was conducted to determine the effect of soil pH change followed by leaching with ground water on crop growth, yield and nutrient uptake of strawberry. Treatments were leaching with ground water (A), hydrated lime application of dissolved portion in $500g{\cdot}L^{-1}$ solution followed by leaching (B), application of $Al_2SO_4$ solution with the concentration of $0.75g{\cdot}L^{-1}$ followed by leaching (C), pH elevation by (B) followed by pH lowering by (C), then leaching (D). Soil samples taken before experiment had 6.0 in soil pH. But the pH of all treatments taken after pH changes and leaching were in the range from 5.8 to 6.2 without statistical differences among treatments. Electrical conductivity of soils taken before experiment was $1.82dS{\cdot}m^{-1}$ and those of (A), (B), (C), and (D) were 1.65, 1.72, 1.71 and $1.83dS{\cdot}m^{-1}$, respectively. The plant height in treatment (C) was 20.4 cm at 80 days after transplanting which was the highest among treatments tested. The other growth characteristics did not show statistical differences among treatments. Tissue contents of Fe, Mn, Zn, Cu and B in treatment (C) were higher than those of other treatments at 80 days after transplanting. The treatment (C) had the highest number of special sizes and fruit weight per 50 plants such as 137 and 3.784 g, respectively. The treatment also had 3.123 kg in total fruit weight and 2,489 kg in marketable fruit weight per 10 are. The treatment (B) also had good results such as 2,820 kg in marketable fruit weight per 10 are.