• Journal of Microbiology and Biotechnology
• /
• v.21 no.3
• /
• pp.256-262
• /
• 2011

A 20.9-kDa metalloprotease was isolated from dried fruiting bodies of the wild basidiomycete mushroom Lepista nuda. The N-terminal amino acid sequence of the protease was seen to be ATFVLTAATNTLFTA, thus displaying no similarity with the sequences of previously reported metalloproteases. The protease was purified using a procedure that entailed ion-exchange chromatography on CM-Cellulose, Q-Sepharose, and Mono S, and FPLC-gel filtration on Superdex 75. The protease functioned at an optimum pH of 7.0 and an optimum temperature of $50^{\circ}C$. It was also noted that the protease demonstrated a proteolytic activity of 1,756 U/mg toward casein. The $K_m$ of the purified protease toward casein was 6.36 mg/ml at a pH of 7.0 and with a temperature of $37^{\circ}C$, whereas the $V_{max}$ was 9.11 ${\mu}g\;ml^{-1}\;min^{-1}$. The activity of the protease was adversely affected by EDTA-2Na, suggesting that it is a metalloprotease. PMSF, EGTA, aprotinin, and leupeptin exerted no striking inhibitory effect. The activity of the protease was enhanced by $Fe^{2+}$, but was curtailed by $Cd^{2+}$, $Cu^{2+}$, $Hg^{2+}$, $Pb^{2+}$, $Zn^{2+}$, and $Fe^{2+}$ ions. The protease also exhibited inhibitory activity against HIV-1 reverse transcriptase with an $IC_{50}$ value of 4.00 ${\mu}M$. The $IC_{50}$ values toward hepatoma Hep G2 and leukemia L1210 cells in vitro were 4.99 ${\mu}M$ and 3.67 ${\mu}M$, respectively.

• Journal of the Economic Geographical Society of Korea
• /
• v.16 no.3
• /
• pp.344-358
• /
• 2013

Vietnam's growth as the second largest coffee producer in the world has been fueled by domestic migration into central highlands. However, the detail migration processes have not been explicitly discussed. In particular, the existing literatures tend to describe the migration flow in a framework of planned migration versus spontaneous migration, paying less attention to the linkage between them. With a case study of Dak Lak province which is the leading robusta producer in Vietnam, this research investigates the linkage between planned and spontaneous migration in a multiscalar approach. The statistic data allow the researcher to know temporal association between the two type of migration in a provine scale. The survey and interview about two coffee-producing communes - Ea H'Ding in Cu M'gar district and Doan Ket in Krung Buk district - inform us that the linkage between planned and spontaneous migration is contingent to the local contexts including ethnic composition, timing of settlements, governement's development program, and timing of a large flow of in-migration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.719-725
• /
• 2003

An experiment was conducted to study the requirement of calcium (Ca) and non-phytin phosphorus (NPP) in commercial broilers during starter phase. Seven hundred and twenty day-old Vencob male broiler chicks were randomly distributed into 144 stainless steel battery brooders, 5 birds in each. Four levels each of Ca (6, 7, 8, and 9 g/kg) and NPP (3, 3.5, 4, and 4.5 g/kg diet) were fed in a factorial design in a corn-soya basal diet. Levels of dicalcium phosphate and oyster shell grit were adjusted to obtain the desired levels of Ca and NPP. Each diet was fed ad libidum to chicks in 9 battery brooders from one d to 21 d of age. Body weight gain and feed intake were depressed (p<0.01) by increasing the dietary Ca level (8 and 9 g/kg) at lower levels of NPP (3 and 3.5 g/kg diet). The growth depression observed at lower NPP level was alleviated by reducing the Ca content to 6 g/kg diet. The tibia ash content and tibia breaking strength increased with increase in both Ca (>6 g/kg) and NPP (>3 g/kg) levels. The leg abnormality score decreased (p<0.01) with increase in NPP content in the diet at all levels of Ca tested. The serum Ca and inorganic P levels were increased with increase in the level of the respective mineral in the diet, but the serum concentration of Ca and P were inversely related to the level of NPP and Ca, respectively /kg diet. In general, the excretion of macro minerals (Ca, and P), and micro minerals {zinc (Zn), manganese (Mn), iron (Fe), and copper (Cu)} was significantly lower at lower levels of Ca and NPP tested (6 and 3 g/kg diet, respectively). The mineral excretion increased with increase in dietary Ca and NPP levels, more conspicuously at the disproportionate ratio of these minerals (>2:1, Ca and NPP). Similarly, the retention of Zn, Mn, and Fe in liver was significantly higher (p<0.01) at lower levels of Ca and NPP tested. Results from this study indicate that the commercial broilers do not require more than 3 g NPP and 6g Ca/kg diet during starter phase (up to 21 d of age) for optimum weight gain, feed efficiency and utilization of Ca, P, Zn, Mn, Fe and Cu. However, the requirements of these minerals for optimum bone mineralization were higher than the levels suggested above.

• Journal of Environmental Science International
• /
• v.17 no.3
• /
• pp.287-296
• /
• 2008

A comprehensive quality survey for heavy metals, organophosphorous and organochlorine residual pesticides, and coplanar PCBs in samples such as water, sediments and soils as well as spiders has been implemented. The samples were undertaken at nine stream sites and their vicinity in August 2006, representing different surrounding environments. The levels of PCBs were expressed as concentrations and WHO-TEFs. Among 12 coplanar PCBs as target compounds in this study, 2,3', 4,4', 5-PentaCB (IUPAC # 118) was the congener with the highest concentration. The total concentrations and TEF values of coplanar PCBs in Siheung stream sediment (heavy industrial complex site located in Ansan city) were 3915.50 pg/g and 0.8366 pg-TEQ/g on a dry weight basis, respectively. Such levels were around 40 times higher compared to sediment from Gapyung stream (green site located in the upper of Myunggi mountain). It is probably due to the direct input of PCBs trom PCBs treatment materials. Organophosphorous (EPN, dementon-s-methyl, diazinon, parathion, and phenthoate) and organochlorine (alpha-BHC, aldrin, 4,4'-DDT, 4,4'-DDE, endosulfan alpha and etc.) pesticides were not detected above 5 ppb of detection limits. The concentrations of Cu and Cd in water and sediment samples from Siheung stream were 44.11 and $0.17ug/m\ell$ and $713.42{\mu}g/g$ and $3.73{\mu}g/g$, respectively, which contained $20\sim40$ times higher concentrations than those from Gapyung stream. In addition to the water and sediment samples, the levels of heavy metals in spider from designated sampling sites were also determined. Heavy metals in spider collected near Siheung stream was appeared to be equivalent and/or a little higher levels with respect to other spiders. Furthermore, the ratio of relative heavy metals (Cu, Cd, and Pb) in spider from each stream site showed a correlation as similar as that of heavy metals in soil samples.

• Economic and Environmental Geology
• /
• v.2 no.4
• /
• pp.23-71
• /
• 1969

Sediment samples were taken at about half-mile intervals from all the inajor rivers draining the St. Austell granite mass. The minus 80 mesh(B.S.S.) fraction of each sample was analysed, using semiquantitative methods, for sodium, potassium, lithium, phosphorus, nickel, chromium, tin, tungsten, arsenic copper, zinc and lead. The work was carried out with the view to gaining further information as to the geographical distribution of such different granite facies as might axist, and to investigate the geochemical dispersion of these elements with relation to mineralisation in this area. The sesults confirm Exley's suggestion that the mass consists of two major granite intrusions, the earlier undifferentiated one is joined on the west by a later differentiated intrutive. During the work grid deviation maps proved particularly useful in obtaining data concerning the nature of the granite but frequency diagrams were not particularly helpful. All the known lode areas were associated with stream sediments containing anomalously high concentrations of lode metals and it is concluded that these high concentrations are due premarily to lode material transferred to the streams in the form of tailings lost during milling operations.

• Economic and Environmental Geology
• /
• v.19 no.3
• /
• pp.199-218
• /
• 1986

Arsenopyrite in arsenic and polymetallic ores from calcic Fe-W skarn deposit of the Ulsan mine, Republic of Korea, has been investigated by means of electron microprobe analysis and X-ray diffractometry. As a result, it is revealed that the Ulsan arsenopyrite may be classified into the following three species with different generation on the basis of its mode of occurrence, chronological order during polymetallic mineralization and chemical composition; arsenopyrites I, II and III. 1) Arsenopyrite I-(Ni, Co)-bearing species belonging to the oldest generation, which has crystallized together with (Ni, Co)-arsenides and -sulpharsenides in the early stage of polymetallic mineralization. In rare cases, it contains a negligible amount of antimony. It occurs usually as discrete grains with irregular outline, showing rarely subhedral form, and is diffused in skarn zone. The maximum contents of nickel and cobalt are 10.04 Ni and 2.45 Co (in weight percent). Occasionally, it shows compositional zoning with narrow rim of lower (Ni+Co) content. 2) Arsenopyrite II-arsenian species, in which (Ni+Co) content is almost negligible, may occur widely in arsenic ores, and its crystallization has followed that of arsenopyrite I. It usually shows subhedral to euhedral form and is closely associated with $l{\ddot{o}}llingite$, bismuth, bismuthinite, chalcopyrite, sphalerite, bismuthian tennantite, etc. It is worthy of note that arsenopyrite II occasionally contains particles consisting of both bismuth and bismuthinite. 3) Arsenopyrite III-(Ni, Co)-free, S-excess and As-deficient species is close to the stoichiometric composition, FeAsS. It occurs in late hydrothermal veins, which cut clearly the Fe-W ore pipe and the surrounding skarn zone. It shows euhedral to subhedral form, being extremely coarse-grained, and is closely associated with pyrite, "primary" monoclinic pyrrhotite, galena, sphalerite, etc. Among three species of the Ulsan arsenopyrite, arsenopyrite I does not serve as a geothermometer, because (Ni+Co) content always exceeds 1 weight percent. In spite of the absence of Fe-S minerals as sulphur-buffer assemblage, the presence of $Bi(l)-Bi_2S_3$ sulphur-buffer enables arsenopyrite II to apply successfully to the estimation of either temperature and sulphur fugacity, the results are, $T=460{\sim}470^{\circ}C$, and log $f(S_2)=-7.4{\sim}7.0$. With reference to arsenopyrite III, only arsenopyrite coexisting with pyrite and "primary" monoclinic pyrrhotite may serve to restrict the range of both temperature and sulphur fugacity, $T=320{\sim}440^{\circ}C$, log $f(S_2)=-9.0{\sim}7.0$. These temperature data are consistent with those obtained by fluid inclusion geothermometry on late grandite garnet somewhat earlier than arsenopyrite II. At the beginning of this paper, the geological environments of the ore formation at Ulsan are considered from regional and local geologic settings, and physicochemical conditions are suspected, in particular the formation pressure (lithostatic pressure) is assumed to be 0.5kb (50MPa). The present study on arsenopyrite geothermometry, however, does not bring about any contradictions against the above premises. Thus, the following genetical view on the Ulsan ore deposit previously advocated by two of the present authors (Choi and Imai) becomes more evident; the ore deposit was formed at shallow depth and relatively high-temperature with steep geothermal gradient-xenothermal conditions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2691-2696
• /
• 2009

Effects of representative group II and transition metal ions on the stability of the $poly(dA){\cdot}[poly(dT)]_2$ triplex were investigated by the van’t Hoff plot constructed from a thermal melting curve. The transition, $poly(dA){\cdot}[poly(dT)]_2\;{\rightarrow}\;poly(dA){\cdot}poly(dT)\;+\;poly(dT)$, was non-spontaneous with a positive Gibb’s free energy, endothermic (${\Delta}H^{\circ}$ > 0), and had a favorable entropy change (${\Delta}S^{\circ}$ > 0), as seen from the negative slope and positive y-intercept in the van’t Hoff plot. Therefore, the transition is driven by entropy change. The $Mg^{2+}$ ion was the most effective at stabilization of the triplex, with the effect decreasing in the order of $Mg^{2+}\;>\;Ca^{2+}\;>\;Sr^{2+}\;>\;Ba^{2+}$. A similar stabilization effect was found for the duplex to single strand transition: $poly(dA){\cdot}poly(dT)\;+\;poly(dT)\;→\;poly(dA)\;+\;2poly(dT)$, with a larger positive free energy. The transition metal ions, namely $Ni_{2+},\;Cu_{2+},\;and\;Zn_{2+}$, did not exhibit any effect on triplex stabilization, while showing little effect on duplex stabilization. The different effects on triplex stabilization between group II metal ions and the transition metal ions may be attributed to their difference in binding to DNA; transition metals are known to coordinate with DNA components, including phosphate groups, while group II metal ions conceivably bind DNA via electrostatic interactions. The $Cd_{2+}$ ion was an exception, effectively stabilizing the triplex and melting temperature of the third strand dissociation was higher than that observed in the presence of $Mg_{2+}$, even though it is in the same group with $Zn_{2+}$. The detailed behavior of the $Cd_{2+}$ ion is currently under investigation.

• Journal of Nutrition and Health
• /
• v.32 no.8
• /
• pp.946-956
• /
• 1999

The iron nutritional status of 328(20-70 years old) women in Seoul and Puyo areas was evaluated using a dietary information and a measurement of hematological indices. The serum iron was measured by Red Blood Cell(RBC), Hemoglobin(Hb), Hematocrit(Hct), Serum Iron(S-Fe), Total Iron Binding Capacity (TIBC), Transferrin Saturation(TS) and Serum Ferritin(SF) and was analyzed with the information obtained by interviews which included socio-demographic variables and the dietary pattern of the subjects. The mean Hb was 12.6 $\pm$ 1.21g/dl(Seoul : 12.4 $\pm$ 1.14g/dl, Puyo : 13.2 $\pm$ 1.28g/dl), Hct was 38.7 $\pm$ 3.84%(Seoul: 37.5 $\pm$ 3.28%, Puyo: 4.19 $\pm$ 3.48%), S-Fe was 76.8 $\pm$ 31.49ug/dl(Seoul: 68.8 $\pm$ 27.3ug/dl, Puyo: 78.8 $\pm$ 32.3ug/dl) and TIBC was 277.7 $\pm$ 86.15ug/dl(Seoul: 354.1 $\pm$ 129.8ug/dl, Puyo: 259.0 $\pm$ 59.55ug/dl). The mean Ts(%) was 30.9 $\pm$ 17.9% (Seoul: 21.7 $\pm$ 10.52%, Puyo: 33.2 $\pm$ 18.68%) and the level was significantly higher in Puyo women(p<0.05). The mean SF was 45.4 $\pm$ 46.21ng/ml(Seoul: 53.6 $\pm$ 50.21ng/ml, Puyo: 36.1 $\pm$ 39.83ng/ml). The Red Blood Cell(RBC) showed a negative correlation with age and Hb, Hct showed a negative correlation with education and income level. However TIBC showed a and total energy expenditure per day. Energy, protein, carbohydrate, iron and vit.C intake showed a positive correlation with Hb and Hct. In particular, heme iron showed a positive correlation with RBC and nonheme iron of Hb, income level and iron intake affected on the level of Hct. In Seoul women, the age of menarche affected on the level of TIBC, total energy expenditure affected on the level of Hct. In Seoul women, the age of menarche affected on the level of TIBC, total energy expenditure affected on the level of S-Fe.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.1
• /
• pp.72-83
• /
• 1997

Forty six natural habitats of Korean lespedeza(Leapedeza stipulacea Maxim.) were investigated for the growth characteristics, mineral contents of plant and the physico-chemical properties of natural habitat's soil compared with the upland soil nearby the habitat. The results obtained were summarized as follows. Plant height and dry matter yield were higher in the samples taken in late than early August showing large variation within the sampling date and location. Korean lespedeza showed higher contents of Fe and Mn, but lower contents of K, Ca, Mg and Cu than Alfalfa. The contents of P and Zn were about the same. The natural habitat showed higher soil pH and Ca content but lower contents of $P_2O_5$, K, and organic matter than the vicinity of natural habitats and the average soil of Korea. The contents of Mg were about the same. The soil texture of natural habitats showed much higher portion of sand and extremely low portions of silt and clay than both area. Korean lespedeza is so well adapted to the soil with low fertilizer and organic matter that other crops and most weeds fail. It also appears to thrive on the sandy loams, loamy sands of the piedmont region such as waste land and on the similar soils with variously physico-chemical properties.