• 한국습지학회지
• /
• 제23권4호
• /
• pp.352-363
• /
• 2021

본 연구는 시설원예단지에서 배출되는 배액 내 포함된 영양물질의 부하량을 평가하여 양액 재이용방안 및 수처리장 도입 설계 등에 활용하고자 하였다. 수경재배 대표 재배 작물을 토마토, 파프리카, 오이, 딸기로 선정하여 총 80 샘플을 수질분석하였다. 분석결과 N, P, K⁺, Na⁺, Mg²⁺, Ca²⁺, Si₄⁺, HCO₃^-, Cl^-, S^2-, Fe, Mn, Cu, Zn, Mo, B 등의 각종 비료성분은 배액 내 매우 높은 농도로 함유되어 있어 수처리 필요성을 확인하였다. 통계분석을 통해 딸기의 배액농도가 토마토, 파프리카, 오이보다 낮은 것으로 분석되었으며, 토마토의 경우 이러한 필수이온 농도가 가장 높으므로 비료의 재이용 측면에서는 가치 있는 자원의 대상임을 확인하였다. 시설원예단지 1m²에서 배출되는 배액의 N과 P의 부하량을 분석하였다. N은 1ha 기준 일간 토마토는 4.0kg, 파프리카 3.3kg, 오이 3.0kg, 딸기 1.5kg의 처리용량이 계산되었다. P농도는 일간 토마토 0.5kg, 파프리카 0.6kg, 오이 0.4kg, 딸기 0.2kg을 일간 처리할 수 있는 규모와 용량이 필요하다고 제안하였다. 본 연구를 통해 작물별 시설온실에서 배출되는 배액에 포함된 질소와 인의 양을 평가하여 배액에서의 양분적 가치산정을 통한 경제성 분석과 지속가능한 농업을 위한 시설원예단지의 수처리 시설 도입 시 반영해야 할 처리용량 산정 시 이용할 수 있는 기초자료로 활용되길 기대하였다.

• BMB Reports
• /
• 제33권2호
• /
• pp.172-178
• /
• 2000

The lipoxygenase was purified 35 fold to homogeneity from the Korean red potato by an ammonium sulfate precipitation and DEAE-cellulose column chromatography. The simple purification method is useful for the preparation of pure lipoxygenase. The molecular weight of the enzyme was estimated to be 38,000 by SDS-polyacrylamide gel electrophoreses and Sepharose 6B column chromatography. The purified enzyme with 2 M $(NH_4)_2SO_4$ in a potassium phosphate buffer, pH 7.0, was very stable for 5 months at $-20^{\circ}C$. Because the purified lipoxygenase is very stable, it could be useful for the screening of a lipoxygenase inhibitor. The optimal pH and temperature for lipoxygenase purified from the red potato were found to be pH 9.0. and $30^{\circ}C$, respectively. The Km and Vmax values for linoleic acid of the lipoxygenase purified from the red potato were $48\;{\mu}M$ and $0.03\;{\mu}M$ per minute per milligram of protein, respectively. The enzyme was insensitive to the metal chelating agents tested (2 mM KCN, 1 and 10mM EDTA, and 1 mM $NaN_3$), but was inhibited by several divalent cations, such as $Cu^{++}$, $Co^{++}$ and $Ni^{++}$. The essential amino acids that were involved in the catalytic mechanism of the 5-lipoxygenase from the Korean red potato were determined by chemical modification studies. The catalytic activity of lipoxygenase from the red potato was seriously reduced after treatment with a diethylpyrocarbonate (DEPC) modifying histidine residue and Woodward's reagent (WRK) modifying aspartic/glutamic acid. The inactivation reaction of DEPC (WRK) processed in the form of pseudo-first-order kinetics. The double-logarithmic plot of the observed pseudo-first-order rate constant against the modifier concentration yielded a reaction order 2, indicating that two histidine residues (carboxylic acids) were essential for the lipoxygenase activity from the red potato. The linoleic acid protected the enzyme against inactivation by DEPC(WRK), revealing that histidine and carboxylic amino acids residues were present at the substrate binding site of the enzyme molecules.

• Fisheries and Aquatic Sciences
• /
• 제16권4호
• /
• pp.311-318
• /
• 2013

The gene encoding an esterase from Photobacterium sp. MA1-3 was cloned in Escherichia coli using the shotgun method. The amino acid sequence deduced from the nucleotide sequence (948 bp) corresponded to a protein of 315 amino acid residues with a molecular weight of 35 kDa and a pI of 6.06. The deduced protein showed 74% and 68% amino acid sequence identities with the putative esterases from Photobacterium profundum SS9 and Photobacterium damselae, respectively. Absence of a signal peptide indicated that it was a cell-bound protein. Sequence analysis showed that the protein contained the signature G-X-S-X-G included in most serine-esterases and lipases. The MA1-3 esterase was produced in both soluble and insoluble forms when E. coli cells harboring the gene were cultured at $18^{\circ}C$. The enzyme was a serine-esterase and was active against $C_2$, $C_4$, $C_8$ and $C_{10}$ p-nitrophenyl esters. The optimum pH and temperature for enzyme activity were pH 8.0 and $30^{\circ}C$, respectively. Relative activity remained up to 45% even at $5^{\circ}C$ with an activation energy of 7.69 kcal/mol, which indicated that it was a cold-adapted enzyme. Enzyme activity was inhibited by $Cd^{2+}$, $Cu^{2+}$, $Zn^{2+}$, and $Hg^{2+}$ ions.

• 동아시아식생활학회지
• /
• 제8권4호
• /
• pp.462-468
• /
• 1998

편이었다. 미량성분으로는 K이 다량으로 존재하였고, 2단계 발효로 제조된 포도식초는 포도양파식초 보다K, Na, Cu함량이 높게 나타났다. ^x Grape vinegar (A) and grape onion vinegar(B) added (3% of onion juice) were produced through two stages of fermentation(alcohol fermentation and acetic acid fermentation) to increase the grape's use. Grape wine which contained 5.6% alcohol was produced on the 3rd day of first stage. Then through the second stages, grape vinegar, of which total acidity was 5.37% was produced. The quality of (A) and ( B) which was produced through the two stages of fermentation was compared with the traditional grape vinegar (C, D) in the market. The content of sugar in (D) was a little higher such as 5.4 $^{\circ}$Brix than others. That of (A) and (B) was 5.13, 4.98 $^{\circ}$Brix respectively. The content of remaining alcohol in (C) was high such as 0.23% comparatively. But there was no remaining alcohol in (A) and (B). The content of acetic acid was 4.3~5.3% as a major organic acid of vinegars. The content of tartaric acid was 340.0 in (A), 315.7 in (B), 322.6 in (C) and 391.7mg% in (D). The content of lactic acid was distinctly high such as 277.4mg% in (D) There were differences such as 9.2~15.5mg% in the content of total free amino acids among grape vinegars. (D) contained 15.5mg% of total free amino acid and (B) also highly such as 12.0mg%. Potassium was high in grape vinegars. The content of potassium, sodium and copper was higher in (A) than (B).

• Journal of Microbiology
• /
• 제35권2호
• /
• pp.109-116
• /
• 1997

An extracellular proteinase of Candida albicans was purified by a combination of 0~75% ammonium sulfate precipitation, DEAE Sepharose Fast Flow ion exchange chromatography, and Sephacryl S-200 HR molecular sieve chromatography. Its mlecular weight was approximately 41 kDa on SDS-PAGE and isoelectric point was 4.4. The enzyme was inhibited by pepstain A. Optimum enzyme activity ranged from pH 2.0 to 3.5 with its maximum at pH 2.5 and a temperature of 45$^{\circ}C$. The addition of divalent cations, $Ca^{2+}$, Zn$^{2+}$ and $Mg^{2+}$, resulted in no significant inhibition of enzymatic activity. However, some inhibitory effects were observed by Fe$^{2+}$, Ag$^{2+}$ and Cu$^{2+}$. With BSA as substrate, an apparent $K_m$ was determined to be 7$\times$10$^{-7}$ M and $K_i$, using pepstatin A as an inhibitor, was 8.05$\times$10$^{-8}$ M. N-terminal amino acid sequence was QAVPVTLXNEQ. Degradation of BSA and fibronectin was shown but not collagen, hemoglobin, immunoglobulin G, or lysozyme. The enzyme preferred peptides with Glu and Leu at the P$_1$ position, but the enzyme activity was highly reduced when the P$_2$ position was phe or pro. This enzyme showed antigenicity against sera of patients with candidiasis.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권1호
• /
• pp.30-35
• /
• 2017

The effects of the crystallographic orientation and sample thickness on the magnetic levitation forces (F) and trapped magnetic field (B) of single grain YBCO bulk superconductors were examined. Single grain YBCO samples with a (001), (110) or (100) surface were used as the test samples. The samples used for the force-distance (F-d) measurement were cooled at 77 K without a magnetic field (zero field cooling, ZFC), whereas the samples used for the B measurement were cooled under the external magnetic field of a Nd-B-Fe permanent magnet (field cooling, FC). It was found that F and B of the (001) surface were higher than those of the (110) or (100) surface, which is attributed to the higher critical current density ($J_c$) of the (001) surface. For the (001) samples with t=5-18 mm, the maximum magnetic levitation forces ($F_{max}s$) of the ZFC samples were larger than 40 N. About 80% of the applied magnetic field was trapped in the FC samples. However, the F and B decreased rapidly as t decreased below 5 mm. There exists a critical sample thickness (t=5 mm for the experimental condition of this study) for maintaining the large levitation/trapping properties, which is dependent on the material properties and magnitude of the external magnetic fields.

• 한국환경보건학회지
• /
• 제49권2호
• /
• pp.66-77
• /
• 2023

Background: Along with the increase in consumer interest in and consumption of tattoo products, the controversy over harmful heavy metals associated with the use of tattoo cosmetics is also increasing. Therefore, investigation of hazardous metals in these tattoo products is needed. Objectives: This study was performed to provide useful data for establishing reasonable standards to securely manage tattoo cosmetics, tattoo stickers, and tattoo inks distributed in the market. Methods: Thirteen kinds of hazardous metal contents (Pb, As, Cd, Sb, Ni, Co, Cu, Cr, Se, Ba, Zn, Sn, and Hg) were analyzed for 23 tattoo cosmetics, ten tattoo stickers, and 16 tattoo inks. Hg was measured through the combustion-gold amalgamation method, and other hazardous metals were measured by inductively coupled plasma-mass spectrometry (ICP-MS) after acidic decomposition using a microwave apparatus. Results: The detected ranges of Pb, As, Cd, Sb, Ni, and Hg in tattoo cosmetics were 0.07~1.18, 0.06~0.41, ND~0.07, 0.01~3.44, 0.12~2.75, and ND~0.01 ㎍/g, respectively. All of the hazardous metals detected were below the recommended maximum standards of the Ministry of Food and Drug Safety. The mean amount of Pb detected in tattoo stickers for children was 0.24 ㎍/kg and Cd was not detected, meaning both metals met the recommended criteria. There was no statistically significant difference in all measured metals between children's tattoo stickers and adults' tattoo stickers. In the results of the study on the hazardous metal content of tattoo inks, four products (25%) for Pb, one product (6%) for As, 13 products (81%) for Ni, four products (25%) for Cu, and five products (31%) for Zn exceeded the recommended standards approved by the government. The highest predicted exposure amount for hazardous metals exceeding the recommended level of tattoo inks in a single tattooing was 5.69 ㎍/kg for Ni, 8.51 ㎍/kg for Zn, 0.44 ㎍/kg for Pb, 8.07 ㎍/kg for Cu, 0.44 ㎍/kg for As, and 71.36 ㎍/kg for Ba. Conclusions: It is necessary to prepare criteria for content limitation for the management of Co, Cr, Ba and Se tattoo cosmetics, and tattoo inks require thorough quality control.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.25-28
• /
• 2017

In superconducting coil applications particularly in wet wound coils, coated conductor (CC) tapes are subjected to different type of stresses that could affect its electromechanical transport property. These include hoop stress acting along the length of the CC tape and the Lorentz force acting perpendicular to the CC tape's surface. Since the latter is commonly associated with the delamination problem of multi-layered REBCO CC tapes, more understanding and attention on the delamination phenomena induced in the case of coil applications are needed. Difference on the coefficient of thermal expansion (CTE) of each constituent layer of the CC tape, the bobbin, and the impregnating materials is the main causes of delamination in CC tapes when subjected to thermal and mechanical cycling. In the design of degradation-free superconducting coils, therefore, characterization of the delamination behaviors including mechanism and strength in the multi-layered REBCO CC tapes becomes a critical issue. Various trials to increase the delamination strength by improving interface characteristics at interlayers have been performed. In this study, in order to investigate the influences of laser cleaning and Ag annealing treated at the substrate side surface, transverse tensile tests were conducted under different sample configurations using $4.5mm{\times}8mm$ upper anvil. The mechanical delamination strength of differently processed CC samples was examined at room temperature (RT). As a result, the Sample 1 with the additional laser cleaning and Ag annealing processes and the Sample 2 with additional Ag annealing process only showed higher mechanical delamination strength as compared to the Sample 3 without such additional treatments. Sample 3 showed quite different behavior when the loading direction is to the substrate side where the delamination strength much lower as compared to other cases.

• KSBB Journal
• /
• 제19권4호
• /
• pp.250-256
• /
• 2004

본 연구에서는 C형 인지질 분해효소 (PLC)를 생산하는 것으로 알려진 각종 B. cereur (B. cereus 11, 315, 559 와 B. cereus ATCC10987)의 배양을 통해 미생물의 성장과 PLC의 생산 특성을 조사하였다. 특히, LB 배지에서 최대 PLC 생산(85 units/mL) 특성을 보인 B. cerrur 318를 이용하여 균체성장 및 PLC 생산에 적합한 배양 배지를 조사하였다. 탄소원으로는 glucose, 질소원으로는 yeast extract와 peptone, 인산과 아연의 농도는 각각 0.5∼l g/L과 0.02∼0.04 g/L이 PLC의 생산을 최대로 할 수 있는 적합한 배양액의 조성인 것으로 나타났다. 또한, B. cereus를 이용하여 PLC를 생산할 때 배양 온도는 3$0^{\circ}C$, 배양액의 pH는 7.5로 배양하는 것이 균체성장 및 PLC 생산에 효율적임을 알 수 있었다. 한편, B. cereus에 의해 생산된 PLC의 반응 특성을 연구하였는데, B. cereus 11 과 318에 의해 생산된 PLC는 45$^{\circ}C$, pH 4에서 최대 활성을 보였고, B. cereus 559에서 생산된 PLC는 5$0^{\circ}C$, pH 7에서 최대 활성을 나타냈다. B. cereus에서 생산된 PLC에 망간 이온, 코발트 이온 그리고 DMSO가 첨가되었을 때는 PLC의 활성이 상당히 증가했고, 구리 이온, glycerol, isopropanol 과 SDS등을 첨가했을 때는 PLC 활성이 감소함을 볼 수 있었다.

• 한국토양비료학회지
• /
• 제46권3호
• /
• pp.193-202
• /
• 2013

The concentrations of heavy metals such as cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), zinc (Zn), nickel (Ni), and arsenic (As) in sand samples collected from selected children's playground and their correlation with environmental parameters, such as concentration of particulate matter in the atmosphere ($PM_{10}$), apartment age (> 5 years), clay and organic matter contents in sand samples, were analyzed. The average heavy metal concentration in samples was 0.040 mg $kg^{-1}$ for Cd, 0.200 mg $kg^{-1}$ for Cr, 1.75 mg $kg^{-1}$ for Cu, 15.1 mg $kg^{-1}$ for Ni, 3.42 mg $kg^{-1}$ for Pb, 66.7 mg $kg^{-1}$ for Zn and 0.750 mg $kg^{-1}$ for As, all of which were below the environmental regulatory level established by Korea Ministry of Environment. However, in the consideration of direct and oral exposure by children to playground sand, the risk of the concentration range in the samples might be greatly enhanced. Heavy metal concentration in samples collected from high $PM_{10}$ (> $70{\mu}gm^{-3}$) area was slightly greater than in samples from low $PM_{10}$ (< $70{\mu}gm^{-3}$), indicating the contribution of particulate matter in air phase to heavy metal concentration in playground sand samples. The concentrations of both Cd and Pb were the highest in apartments older than 21 years (0.050 mg $kg^{-1}$ and 5.28 mg $kg^{-1}$ for Cd and Pb respectively) and showed positive correlation with apartment age (p<0.01 and p<0.001 for Cd and Pb, respectively). Clay content in playground sands ranged 3.8~11.2% and was positively correlated with heavy metal concentration. Organic matter content was negligible (mostly < 0.1%) and showed poor correlation with heavy metal concentration. In conclusion, concentration of heavy metals in playground sand was found to be predominantly influenced by the apartment age and clay content in sand samples and supplemented by dust deposition of particulate matter ($PM_{10}$) from atmosphere.