• Korean Journal of Food Science and Technology
• /
• v.11 no.1
• /
• pp.1-7
• /
• 1979

This experiment was carried out to investigate the nutritive value of brewery's activated sludge on the performance and nutrients utilization of egg type chicken of babcock fed the different levels of sludge. The chemical composition, content of amino acids and mineral in brewery's activated sludge were also analyzed. 3,6,9 and 12% of brewery's activated sludge were supplemented with basal ration as a substituted ingredient to soybean oil meal in experimental ration. The results obtained were as follow: 1. Chemical composition analysis 1) Brewery's activated sludge had 42.50% of crude protein on the air dried basis, and had 15,69% of crude ash, and had 2,060 kcal of metabolizable energy per kg of sludge. 2) Total amino acid content of brewery's activated sludge was 42.50% and 99% crude protein of brewery's activated sludge was a true amino acid, and brewery's activated sludge contained especially more methionine and threonine that those of soybean oil meal. 3) In case of mineral content of brewery's activated sludge, phosphorus, magnesium, copper and iron were plentifully included. However, calcium content in brewery's activated sludge was very low. 2. Feeding trial 1) Body gain of chicken fed the different levels of sludge was decreased in proportion to increasing level of sludge was decreased in proportion to increasing level of sludge. However, no statistical differences were found out between treatments. 2) Diet intake of chicken fed the different levels of sludge was significantly (p<0.05) increased as the supplementation level of sludge in ration increased. 3) Feed conversion of chicken fed the different levels of sludge was high in proportion to increasing level of sludge in ration. However, there were no significant differences between treatments. 3. Digestion trial 1) Utilization of dry matter of chicken fed the different levels of sludge was decreased as the level of sludge in ration increased. However, no statistical differences were found out between treatments. 2) Utilization of crude protein of chicken fed the different levels of sludge was significantly (p<0.01) increased as the level of sludge was higher. Utilization of crude protein of control treatment and of sludge 3% treatment was higher than that of other treatments. 3) Utilization of crude ash of chicken fed the different levels of sludge was significantly (p<0.05) decreased in proportion to increasing level of sludge in ration. 4) Utilization of NFE of chicken fed the different levels of sludge was slightly decreased in proportion to increasing level of sludge in ration. However, no statistical differences were found out between treatments. Therefore according to this experiment, it may be concluded that brewery's activated sludge can be supplemented with chicken ration by $6{\sim}9%$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.5
• /
• pp.685-695
• /
• 2004

Size-segregated measurements of aerosol composition are used to estimate the transport of natural and anthropogenic aerosols at Gosan site during May 2002. The results of measurement show that not only soil dust but also anthropogenic aerosols, including sulfur and enriched trace metals such as Pb, Zn, Cu, are transported to Gosan. This study combines the size- and time-resolved aerosol composition measurements with factor analysis in order to identify some source materials. As a result, coarse particles (2.5${\mu}m$~12${\mu}m$) are influenced by soil, sea-salt, coal, coal combustion, and nonferrous sources. But fine particles have different sources. The fine particles, which the diameter is from 0.56${\mu}m$ to 2.5${\mu}m$, are more affected by road dust, oil combustion, industry. municipal incineration, and ferrous metal sources. The very fine particles, from 0.09${\mu}m$ to 0.56${\mu}m$, mainly supplied by biomass burning, oil combustion, nonferrous and ferrous metal sources.

• Journal of radiological science and technology
• /
• v.10 no.1
• /
• pp.75-83
• /
• 1987

The insulating oil used for X-ray tube housing were degraded by X-ray irrdiation, high temperature and high anode voltage for normal operation. This study was measured the conduction current-X-ray dose, heating degradation, time, temperature and electric field characteristics and the dependense of electrode materials and gap length in the X-ray irradiatied insulating oil under of D.C voltage. The obtained results can be summarized as following. 1. The conduction current of X-ray irradiated insulating oil is more about $2.5{\sim}3$ times as large as than that of non x-ray irradiated, and is become saturation phenomena after some degree. 2. The conduction current of many times heating x-ray irradiated insulating oil is more than that of a few times heating. 3. The higher temperature x-ray irradiated insulating oil is increased, the more conduction current, and that is increased about ten times as large as when it's temperatures is increased to $80^{\circ}C\;at\;30^{\circ}C$, twenty five times at $100^{\circ}C$. 4. The dependence of electrode materials is appeared at the low electric field, and the small gap length with Fe > Cu > Al. 5. The low electric field than 3000 v/cm is appeared Ohm's law region, and the high is become saturation region at the I-E characteristics. 6. The larger gap length is become, the more conduction current is increased at the same electric field.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.200-204
• /
• 2011

In this paper, we deposited the tungsten carbon nitride (W-C-N; nitrogen gas flow of 2 sccm) and tungsten carbon (W-C) thin film on silicon substrate using rf magnetron sputter. Then the thin films annealed at $800^{\circ}C$ during 30 minute ($N_2$ gas ambient) for thermal damage. Nano-indenter was executed 16 points on thin film surface to measure the thermal stability, and we also propose the elastic modulus and the Weibull distribution, respectively. This nanotribology method provides statistically reliable information. From these results, the W-C-N thin film included nitrogen gas flow is more stable for film uniformities, physical properties and crystallinities than that of not included nitrogen gas flow.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.3
• /
• pp.566-576
• /
• 1997

This study was performed to evaluate the tensile strength of solder joint in titanium and the wettability of 14K gold solder on titanium. Two pieces of titanium rod 30 mm in length and 3mm in diameter were butt-soldered with a 14K gold solder using the electric resistance heating under flux-argon atmosphere, the infrared heating under argon atmosphere, and the infrared heating under vacuum-argon atmosphere. A tensile test was performed at a crosshead speed of 0.5 mm/min, and fracture surfaces were examined by SEM. To evaluate the wettability of 14K gold solder on titanium, titanum plates of a $17{\times}17{\times}1mm$ were polished with #80-#2000 emery papers, and the spreading areas of solder 10 mg were measured by heating at 840 * for 60 seconds. The solder-matrix interface regions were etched by the solution of 10% KCN-10% (NH4)2S2O8, and analyzed by EPMA. The results obtained were summarized as follows ; 1. The maximum tensile strength was obtained when the titanium surface was polished with #2000 emery paper and soldered using the electric resistance heating under flux-argon atmosphere. Soldering strengths showed the significant difference between the electric resistance heating and the infrared heating(p<0.05). 3. The fracture surfaces showed the aspect of brittle fracture, and the failure developed along the interfaces of solder-matrix reaction zone. 4. The EPMA data for the solder-matrix interface region revealed that the diffusion of Au and Cu occurred to the titanium matrix, and the reaction zone showed the higher contents of Au, Cu and Ti than others.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.589-597
• /
• 2016

There are a number of industrial complexes which could be a source of heavy metal (loid)s contamination of arable soil in Gyeongnam province of South Korea. Heavy metal (loid)s accumulation of plant is more related to the concentration of plant available heavy metal (loid)s in arable soil than that of total heavy metal (loid)s. The objectives of this study were 1) to examine heavy metal concentrations in soils located near industrial complexes in Gyeongnam province and 2) to determine the relationship between concentration of plant available heavy metal (loid)s and chemical properties of soil. Soil samples were collected from 85 sites of arable lands nearby 7 industrial complexes in Gyeongnam province. Total heavy metal (loid)s concentration, available heavy metal (loid)s concentration, and chemical properties of collected soils were measured. The mean concentrations of arsenic (As), cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) in the soils were $5.8mg\;kg^{-1}$, $1.3mg\;kg^{-1}$, $0.03mg\;kg^{-1}$, $51.5mg\;kg^{-1}$, and $68.7mg\;kg^{-1}$, respectively. Total concentration of Cd and Zn in arable soil located near ${\nabla}{\nabla}$ industrial complex exceeded the warning criteria ($4mg\;kg^{-1}$ and $300mg\;kg^{-1}$ for Cd and Zn, respectively) as described by in the soil environmental conservation Act of Korea. The concentration of plant available heavy metal (loid)s was negatively related to the soil pH and available Pb and Zn concentrations had relatively high correlation coefficient when compared with other heavy metal (loid)s. The concentration of plant available Pb and Zn was negatively related to that of organic matter (OM). Based on the above results, it might be a good soil management to control pH and OM concentration with soil amendments such as lime and compost to reduce phytoavailability of heavy metal (loid)s in arable soil located near industrial complex.

• Applied Biological Chemistry
• /
• v.14 no.3
• /
• pp.213-220
• /
• 1971

In order to investigate chemical components of edible marine algae in Korea, the present work is carried out with ten edible and two non-edible species of brown algae, collected from Cheju-island during October, 28-30 in 1970. Among the general components, water content is about 14-16% to dry weight and the crude protein about 16%, which are almost similar in content compared with several non-cultivate edible land plants. The content of crude fat is about 0.7-2.0%, and that of crude fiber about 3-8%, while the content of crude ash is 9.17-16.89%. The last one is more than two times in content compared with the land plants. The reducing sugar is about 0.27-2.49% in general. On the other hand, among the minerals Ca content is the most abundant, 1.73-2.51%, and the next is S, 1.0-1.8%. Mg and I are around 0.1-1%, while K and Na are about 1% in content. Among the micro-elements, Fe and Zn are about 0.01-0.03%, and Cu and Mn 0.001-0.005% in content. There is no special significant difference in chemical components between the edible and non-edible species of brown algae. Moreover, so far as the present investigation is concerned, there can be found no significant inter-species relationship on the taxonomical or phylogenetical points of view, considering their components.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.352-363
• /
• 2021

The purpose of this study was to evaluate the load of nutrients contained in the drainage discharged from the facility horticultural complex and to use them for re-use of fluids and design for introduction of water treatment plants. Representative hydroponic cultivation crops were selected as tomato, paprika, cucumber, and strawberry, and the total number of samples analyzed for water quality was 80. As a result of the analysis, since various fertilizer components such as N, P, K⁺, Na⁺, Mg²⁺, Ca²⁺, Si₄⁺, HCO₃^-, Cl^-, S^2-, Fe, Mn, Cu, Zn, Mo and B are contained at very high concentrations in the drainage, the need for water treatment was confirmed. Through statistical analysis, it was analyzed that the drainage concentration of strawberries was lower than that of tomatoes, paprika, and cucumbers. In the case of tomatoes, these essential ion concentrations are the highest, so it was confirmed that they are subject to valuable resources in terms of reuse of fertilizers. The load of N and P of the drainage discharged from the facility horticultural complex 1m² was analyzed. For N, the daily processing capacity of 4.0 kg of tomatoes, 3.3 kg of paprika, 3.0 kg of cucumbers, and 1.5 kg of strawberries was calculated based on 1 ha. It was suggested that the P concentration needs a scale and capacity that can handle 0.5 kg of tomatoes, 0.6 kg of paprika, 0.4 kg of cucumber, and 0.2 kg of strawberries per day. Through this study, the amount of nitrogen and phosphorus contained in the drainage discharged from the greenhouse of each crop was evaluated to analyze the economy. In addition, it was expected to be used as basic data that can be used to calculate the treatment capacity to be reflected when introducing water treatment facilities in facility horticultural complexes for sustainable agriculture.

• BMB Reports
• /
• v.33 no.2
• /
• pp.172-178
• /
• 2000

The lipoxygenase was purified 35 fold to homogeneity from the Korean red potato by an ammonium sulfate precipitation and DEAE-cellulose column chromatography. The simple purification method is useful for the preparation of pure lipoxygenase. The molecular weight of the enzyme was estimated to be 38,000 by SDS-polyacrylamide gel electrophoreses and Sepharose 6B column chromatography. The purified enzyme with 2 M $(NH_4)_2SO_4$ in a potassium phosphate buffer, pH 7.0, was very stable for 5 months at $-20^{\circ}C$. Because the purified lipoxygenase is very stable, it could be useful for the screening of a lipoxygenase inhibitor. The optimal pH and temperature for lipoxygenase purified from the red potato were found to be pH 9.0. and $30^{\circ}C$, respectively. The Km and Vmax values for linoleic acid of the lipoxygenase purified from the red potato were $48\;{\mu}M$ and $0.03\;{\mu}M$ per minute per milligram of protein, respectively. The enzyme was insensitive to the metal chelating agents tested (2 mM KCN, 1 and 10mM EDTA, and 1 mM $NaN_3$), but was inhibited by several divalent cations, such as $Cu^{++}$, $Co^{++}$ and $Ni^{++}$. The essential amino acids that were involved in the catalytic mechanism of the 5-lipoxygenase from the Korean red potato were determined by chemical modification studies. The catalytic activity of lipoxygenase from the red potato was seriously reduced after treatment with a diethylpyrocarbonate (DEPC) modifying histidine residue and Woodward's reagent (WRK) modifying aspartic/glutamic acid. The inactivation reaction of DEPC (WRK) processed in the form of pseudo-first-order kinetics. The double-logarithmic plot of the observed pseudo-first-order rate constant against the modifier concentration yielded a reaction order 2, indicating that two histidine residues (carboxylic acids) were essential for the lipoxygenase activity from the red potato. The linoleic acid protected the enzyme against inactivation by DEPC(WRK), revealing that histidine and carboxylic amino acids residues were present at the substrate binding site of the enzyme molecules.

• Fisheries and Aquatic Sciences
• /
• v.16 no.4
• /
• pp.311-318
• /
• 2013

The gene encoding an esterase from Photobacterium sp. MA1-3 was cloned in Escherichia coli using the shotgun method. The amino acid sequence deduced from the nucleotide sequence (948 bp) corresponded to a protein of 315 amino acid residues with a molecular weight of 35 kDa and a pI of 6.06. The deduced protein showed 74% and 68% amino acid sequence identities with the putative esterases from Photobacterium profundum SS9 and Photobacterium damselae, respectively. Absence of a signal peptide indicated that it was a cell-bound protein. Sequence analysis showed that the protein contained the signature G-X-S-X-G included in most serine-esterases and lipases. The MA1-3 esterase was produced in both soluble and insoluble forms when E. coli cells harboring the gene were cultured at $18^{\circ}C$. The enzyme was a serine-esterase and was active against $C_2$, $C_4$, $C_8$ and $C_{10}$ p-nitrophenyl esters. The optimum pH and temperature for enzyme activity were pH 8.0 and $30^{\circ}C$, respectively. Relative activity remained up to 45% even at $5^{\circ}C$ with an activation energy of 7.69 kcal/mol, which indicated that it was a cold-adapted enzyme. Enzyme activity was inhibited by $Cd^{2+}$, $Cu^{2+}$, $Zn^{2+}$, and $Hg^{2+}$ ions.