• 대한핵의학회지
• /
• 제35권5호
• /
• pp.324-333
• /
• 2001

목적: $^{123}I$ 표지된 지방산 유도체는 심근에너지대사를 평가하는데 사용되어 왔다. 본 연구는 $^{123}I$-BMIPP를 지방육종 진단물질로서의 유용성을 평가하기 위하여, 지방육종 세포주와 신경교종 세포주간의 시험관내의 섭취율을 비교하고 지방육종 형성 nude mice 동물모델에서의 생체분포와 생체영상을 확인하였다. 대상 및 방법: Cold-BMIPP에 $^{123}I$의 표지는 $Cu^{2+}$를 촉매로 이용하여 반응 후 Sep-pak으로 분리정제하여 TLC를 이용하여 방사화학적 순도를 확인하였다. 시험관내 섭취율 시험은 $^{123}I$-BMIPP를 지방육종 세포주인 SW872와 신경교종 세포주인 9L에 각각 시간대별로 5분, 15분, 30분, 60분, 120분, 180분씩 처리한 후 섭취율을 비교하였다. 정상 백서에서의 생체분포를 평가하기 위하여 18시간 금식시킨 군(n=6/군)과 식이를 한 군으로하여 $^{123}I$-BMIPP를 꼬리정맥에 주사하고 30분, 2시간, 24시간후의 각 장기별 방사능을 감마카운터로 계측하였다. 지방육종 세포주인 SW872를 왼쪽 대퇴부에 피하접종한후 종양이 형성된 누드마우스(n=5/군)를 18시간 금식시키고 $^{123}I$-BMIPP를 주사한 후 30분, 2시간, 24시간후의 생체분포와 2시간, 24시간의 생체영상을 평가하였다. 결과: $^{123}I$-BMIPP의 표지수율은 95 % 이상이었으며, 방사화학적 순도는 99 % 이상이었다. 지방육종 세포주인 SW872가 신경교종 세포주인 9L보다 180분에서 1.5배 정도의 섭취율의 증가를 나타내었다. 정상 백서에서의 생체분포를 확인한 결과, 24시간에서 금식을 한 경우가 식이를 한 경우보다 방사성표지 지방산의 제거율이 지연됨을 알 수가 있었으며 주요 배출장기는 위장관으로 확인되었다. 지방육종이 형성된 누드마우스에서 각 시간대별로 Tumor/Blood 비율은 0.94, 0.75, 1.38이었고, Tumor/Muscle의 비율은 0.66, 1.53, 1.11을 나타내었다. 24시간의 감마카메라영상에서 지방육종으로의 국소적인 집적이 확인되었다. 결론: 이상의 결과를 종합해볼 때 지방육종에서 $^{123}I$-BMIPP를 지방육종 영상물질로서의 사용 가능성을 확인할 수 있었다.

• 농업과학연구
• /
• 제38권1호
• /
• pp.17-23
• /
• 2011

This research was conducted to investigate the influence of application rate of liming fertilizers on changes in soil chemical properties and growth of 'Red Madness' petunia in plug production. To achieve this, dolomite (DO) with 0, 1.0, 3.5, 8.0 or 13.0 $g{\cdot}L^{-1}$ and calcium carbonate (CC) with 0, 2.0, 2.5, 3.0, 3.5, or 4.0 $g{\cdot}L^{-1}$ were incorporated into peatmoss + vermiculite (1:1, v/v) during the root substrates formulation. The treatments of 3.5 $g{\cdot}L^{-1}$ of DO and 2.5 or 3.0 $gL^{-1}$ of CC had acceptable ranges of pH and EC in soil solution such as 5.6~6.2 and 0.7~1.0 $dS{\cdot}m^{-1}$, respectively. The faster rising of pH was observed in root media containing CC rather than those of DO. This indicates that the solubility of CC is higher than DO. The soil Ca concentrations in all treatments of CC were 1.8 times as high as those of DO. The treatments of 3.5 or 8.0 $g{\cdot}L^{-1}$ of DO had the highest soil Mg concentrations, but all treatments of CC had lower soil Mg concentrations than control treatment indicating that additional application of Mg fertilizers are required. The elevated application rate of DO or CC resulted in the increase of fresh and dry weight. But plant heights were not influenced by application of liming fertilizers. The results of tissue analysis showed that application of DO or CC influenced the $PO_4{^-}P$, Ca and Mg contents, but not influenced the contents of other nutrients such as N, P, Fe, Mn, Zn and Cu.

• 콘크리트학회지
• /
• 제9권1호
• /
• pp.143-151
• /
• 1997

전기로 집진 분진상의 중금속(Pb, $Cr^{6+}$, Cu, Cd, Zn)을 함침시킨 규조토를 열처리방법($750^{\circ}C$-30분)으로 활성화하였다. 활성규조토로 일반시멘트 모르터의 시멘트양을 중량비로 0%, 2.5%, 5.0%, 10%, 20%까지 대체하고 압축강도와 화학저항성을 조사하였다. 화학저항성 조사에는 습윤건조반복실험(Wetting /Drying Cycle)과 화학침식저항성($H_2SO_4,\; CaCl_2,\; MgSO_4$)이 포함되었다. 결과에 의하면 일반시멘트 모르터에 활성규조토를 시멘트에 10%까지 치환하여 갈수록 압축강도(28일)는 증가하였다. 최고의 압축강도는 활성규조토가 10%까지 치환하였을 때 $496kgf/cm^2$이었으며, 활성규조토가 전혀 혼합되지 아니한 시멘트 모르터의 압축강도($391kgf/cm^2$)보다 약 275까지 증가되었다. 이때 중금속들은 99% 이상의 고정율을 보였으며 Wet/Dry cycle 및 화학침식저항성에서도 활성규조토가 혼합된 시멘트 모르터가 일반 시멘트 모르터보다 훨씬 높은 저항성을 보였다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.36-36
• /
• 2011

We synthesized new dye sensor based on indole compound. Through the UV-vis absorptions, we analyzed chemosensing properties to explain metal binding properties. The peak absorptions increased at 472 nm when added metal cations($Cd^{2+}$, $Cu^{2+}$, $Hg^{2+}$, $Fe^{2+}$, $Zn^{2+}$, $Ni^{2+}$ and $Cr^{3+}$) and gradually decreased the peak at 516 nm. Thus, this UV-Vis absorption behavior clearly showed the metal binding reaction. To measure energy level of used dye sensor, HOMO/LUMO energy value was calculated with cyclovaltagramm(CV) and using computational calculation method, in which we estimated the optimum structure of dye sensor. CV and computational calculation method, both compared to find suitable geometric structure. (with almost same energy values.) From the computational calculation, dye sensor has plane structure. So, Amine and ketone in the dye sensor faced each other and makes position to bind metal cations. In addition, these positions was supported pull-push electron system and generated MLCT process, when the dye sensor was bonded with the metal cations and resulted chemosensing properties. Through the electrochemical and computational calculation method analyze, we proposed the chemosensing principles that the dye sensor bind the metal cation between ketone and amine. Finally, the formation type of metal ion bindings was determined by Job's plot measurements.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.121-121
• /
• 2012

To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordant effect of Hwangsu spring was analyzed by pH, temperature, trace elements and organic matter. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, 2011, in Yeongcheon(Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. The Result of ICP analysis, it contain bned Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm). Dyeing and post-mordant procedure; Fabrics(cotton, silk, rayon) were dyed with natural colorants(Sopbora Japonica L., Caesalpinia sappan L., Allium cepa L.) for 20 min at $80^{\circ}C$. Hwangsu spring, aluminium sulfate $14-18H_2O(Al_2(SO_4)_3{\cdot}14-18H_2O)$, iron sulfate peptahydrate($FeSO_4{\cdot}7H_2O$), copper sulfate pentahydrate($CuSO_4{\cdot}5H_2O$) were used by post mordants. But in the case of Caesalpinia sappan L. was dyed after pre-mordanting with Al(II). The fabrics were dyed with each mordant solutions at $25^{\circ}C$ for 10min. The colorless also was measured by color-differnce meter. Comparison with a synthetic mordants, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1529-1540
• /
• 1993

본 연구에서는 금속 열처리를 위한 고온면의 막비등 급냉각에 관한 1차적 연구로서 과냉과도 비등곡선의 정확한 형상과 냉각제의 냉각조건이 강재의 과냉과도 비등열전달에 미치는 영향, $A_1$변태점 부근의 $A_1$냉각속도와 상변태열량광의 관계, 그리고 상변태열이 냉각곡선에 미치는 영향 등을 규명하고자 한다.

• 미생물학회지
• /
• 제31권3호
• /
• pp.230-236
• /
• 1993

Micrococcus luteus 가 생산하는 isocitrate lyase 의 효소단백질을 ammonium sulfate precipitation, DEAE-cellulose, DEAE-sephacel, 1차 Sephadex G-200, 2 차 Sephadex G-200 column chromatography 과정을 통하여 분리 정제하였으며 정제된 효소의 분자량과 효소학적 특성을 조사하였다. 정제된 isocitrate lyase 는 상기 정제 과정을 통하여 10.2%의 회수율과 38.8 의 정제도를 나타내었으며, 전기영동시 단일밴드를 얻을 수 있었고, SDS-PAGE 에 의해 측정된 분자량을 약 60,000이며 1개의 subunit 로 나타났다. 본 효소의 최적 pH 는 7.5이었으며, 최적 온도는 $40^{\circ}C$ 부근이었고 $45^{\circ}C$까지는 안정하였다. 2가 금속염의 첨가시$ Mg^{2+}$ 를 제외한 다른 금속이온들은 효소활성을 저해하는 것으로 나타났으며 $Mg^{2+}$의 농도는 5 mM 에서 최대활성을 나타내었다. 또한 기질인 DL-isocitrate 의 $K_{m}$ 치는 0.95 mM 로 나타났으며, thiol 화합물의 첨가시 cysteine 은 1mM, glutathione과 $\beta$-mercaptoethanol 은 5 mM 의 농도에서 효소활성이 최대에 달하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권3호
• /
• pp.58-64
• /
• 2013

This study proposed a low temperature hydrothermal carbonization to treat and recycle sewage sludge and determined the optimal conditions for the biochar production. The physical and chemical properties of biochar were analyzed and its sorption capacity for heavy metals was evaluated. To produce biochar, 50 g of sewage sludge was heated at 220, 230, and $240^{\circ}C$ for 1, 2, 3, 5, 8, and 10 hours in a reactor. The optimal conditions to produce biochar was $230^{\circ}C$ and 8 hours. Sorption capacity tests were conducted for arsenic (As), cadmium (Cd), copper (Cu), lead (Pb), zinc (Zn) and nickel (Ni). Among them, lead was shown the highest heavy metal adsorption efficiency of biochar, followed by copper, cadmium, zinc, and nickel, but arsenic was hardly adsorbed overall.

• 한국의류산업학회지
• /
• 제17권3호
• /
• pp.476-485
• /
• 2015

The purpose of this research is to analyze the effects of persimmon juice and hibiscus flowers extract to perform combination dyeing of silk fabrics, with respect to color changes, fastness, and functionality. The optimal conditions as a result, were shown at 100% of dye concentration, $40^{\circ}C$ of dyeing temperature and 30 minutes of dyeing time while in terms of dye uptake depending on the kind of mordants and methods. The highest K/S value was recorded at pH 3, pre-mordants of $CuSO_4$, and $SnCl_2$, post-mordanting. After repeated dyeing and post-mordanting, various color change occurred with mordant treatments. Color fastness of dyed fabrics with hibiscus flowers extract was improve considerably by combination dyeing with persimmon juice extract. In aspects of functional properties, it showed excellent results of 99% deodorization rate, 99.9% Staphylococcus aureus rate and 99.9% Klebsiella pneumoniae.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.46-52
• /
• 2017

We quantitatively measured the mass transfer from friction surfaces, specifically brake pads and rotors, using laser plasma spectroscopy. Specifically, we modelled the mass transfer from the pad to the rotor and measured the elemental diffusion intensity distribution in the rotor material using laser plasma spectroscopy. The main elements measured were Cu, Ni, Ti, and Cr, and the distribution of these after transfer was measured as the ratio of the atomic peak and the ion peak of the plasma in the rotor exposed to friction and the surface composition of the rotor and the roughness, respectively. We measured and quantified the diffusion coefficient for each element through the mass transfer model and found that Cr obtained the largest diffusion coefficient (D) of the elements measured based on this system with a value of $1.9484{\times}10^{-15}m^2/s$.