• 한국대기환경학회지
• /
• 제26권5호
• /
• pp.543-553
• /
• 2010

Almost five million citizens a day are using subways as a means of traffic communication in the Seoul metropolitan. As the subway system is typically a closed environment, indoor air pollution problems frequently occurs and passengers complain of mal-health impact. Especially $PM_{10}$ is well known as one of the major pollutants in subway indoor environments. The purpose of this study was to compare the indoor air quality in terms of $PM_{10}$ and to quantitatively compare its source contributions in a Seoul subway platform before and after installing platform screen doors (PSD). $PM_{10}$ samples were collected on the J station platform of Subway Line 7 in Seoul metropolitan area from Jun. 12, 2008 to Jan. 12, 2009. The samples collected on membrane filters using $PM_{10}$ mini-volume portable samplers were then analyzed for trace metals and soluble ions. A total of 18 chemical species (Ba, Mn, Cr, Cd, Si, Fe, Ni, Al, Cu, Pb, Ti, $Na^+$, $NH_4^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, and ${SO_4}^{2-}$) were analyzed by using an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the source of particulate matters. $PM_{10}$ for the station was characterized by three sources such as ferrous related source, soil and road dust related source, and fine secondary aerosol source. After installing PSD, the average $PM_{10}$ concentration was decreased by 20.5% during the study periods. Especially the contribution of the ferrous related source emitted during train service in a tunnel route was decreased from 59.1% to 43.8% since both platform and tunnel areas were completely blocked by screen doors. However, the contribution of the fine secondary aerosol source emitted from various outside combustion activities was increased from 14.8% to 29.9% presumably due to ill-managed ventilation system and confined platform space.

• 한국환경농학회지
• /
• 제33권2호
• /
• pp.78-85
• /
• 2014

BACKGROUND: Recent studies using various industrial wastes for heavy metal stabilization in soil were conducted in order to find out new alternative amendments. The acid mine drainage sludge(AMDS) contains lots of metal oxides(hydroxides) that may be useful for heavy metal stabilization not only waste water treatment but also soil remediation. The aim of this study was to investigate the applicability of acid mine drainage sludge for heavy metals stabilization in soils METHODS AND RESULTS: Alkali soil contaminated with heavy metals was collected from the agricultural soils affected by the abandoned mine sites nearby. Three different amounts(1%, 3%, 5%) of AMDS were applied into control soil and contaminated soil. For determining the changes in the extractable heavy metals, $CaCl_2$ and Mehlich-3 were applied as chemical assessments for metal stabilization. For biological assessments, lettuce(Lactuca sativa L.) and chinese cabbage(Brassica rapa var. glabra) were cultivated and accumulation of heavy metals on each plant were determined. It was revealed that AMDS reduced heavy metal mobility and bioavailability in soil, which resulted in the decreases in the accumulation of As, Cd, Cu, Pb, and Zn in each plant. CONCLUSION: Though the high level of heavy metal concentrations in AMDS, any considerable increase in the heavy metal availability was not observed with control and contaminated soil. In conclusion, these results indicated that AMDS could be applied to heavy metal contaminated soil as an alternative amendments for reducing heavy metal mobility and bioavailability.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.81.2-81.2
• /
• 2012

To fabricate a metal mold for injection molding, hot-embossing and imprinting process, mechanical machining, electro discharge machining (EDM), electrochemical machining (ECM), laser process and wet etching ($FeCl_3$ process) have been widely used. However it is hard to get precise structure with these processes. Electrochemical etching has been also employed to fabricate a micro structure in metal mold. A through mask electrochemical micro machining (TMEMM) is one of the electrochemical etching processes which can obtain finely precise structure. In this process, many parameters such as current density, process time, temperature of electrolyte and distance between electrodes should be controlled. Therefore, it is difficult to predict the result because it has low reliability and reproducibility. To improve it, we investigated this process numerically and experimentally. To search the relation between processing parameters and the results, we used finite element simulation and the commercial finite element method (FEM) software ANSYS was used to analyze the electric field. In this study, it was supposed that the anodic dissolution process is predicted depending on the current density which is one of major parameters with finite element method. In experiment, we used stainless steel (SS304) substrate with various sized square and circular array patterns as an anode and copper (Cu) plate as a cathode. A mixture of $H_2SO_4$, $H_3PO_4$ and DIW was used as an electrolyte. After electrochemical etching process, we compared the results of experiment and simulation. As a result, we got the current distribution in the electrolyte and line profile of current density of the patterns from simulation. And etching profile and surface morphologies were characterized by 3D-profiler(${\mu}$-surf, Nanofocus, Germany) and FE-SEM(S-4800, Hitachi, Japan) measurement. From comparison of these data, it was confirmed that current distribution and line profile of the patterns from simulation are similar to surface morphology and etching profile of the sample from the process, respectively. Then we concluded that current density is more concentrated at the edge of pattern and the depth of etched area is proportional to current density.

• 대한지하수환경학회지
• /
• 제4권1호
• /
• pp.41-53
• /
• 1997

먹는샘물 개발지역에서의 환경 영향 평가를 위한 수리지구화학의 기초 자료를 국내 먹는샘물 개발지역에 존재하는 암석, 토양 및 자연수 시료를 예로 하여 제시하였다. 암석에 대해서는 현미경 분석을 실시하였고, 토양 및 자연수 시료에 대해서는 화학 분석을 실시하였다. 토양은 분해 방법별로 중금속 원소들의 함량 비교를 하였으며 오염지수를 통해 오염 영향을 평가하였다. 또한 자연수 시료들을 대상으로 기반암 및 심도에 따른 수리지구화학적 특성과 자연수의 화학적 진화, 물-암석 반응에 대하여 고찰하였다. 대수층을 구성하는 암석을 화강암질암과 변성퇴적암류, 그리고 퇴적암류로 구분하였으며 이들 기반암에서 비롯된 중금속의 토양과 자연수의 오염 현상은 없는 것으로 판단되었다. 연구 지역의 토양은 HNO$_3$+HClO$_4$의 혼합산을 이용한 방법과 0.1 N HCl을 사용한 방법 모두에서 낮은 중금속 함량을 보여 자연적인 부화 현상이나 인위적 오염을 받지 않은 토양임을 알 수 있었다. 특히 0.1 N HCl을 사용하여 중금속 중 가용성 부분을 추출해 낸 결과 Cu, Pb, Zn, Cd 및 Cr 등 중금속 원소의 함량은 상당히 낮은 것을 확인할 수 있었으며 따라서 식물과 수계를 통한 오염의 영향은 매우 낮다고 할 수 있다. 오염지수를 통해 여러 원들의 복합적인 오염 양상을 고려하여 오염도를 산출한 결과 역시 연구 지역 토양은 오염지수가 0.03~0.47로 중금속에 의한 오염이 진행되지 않고 있음을 알 수 있었다. 심부지하수 시료를 대상으로 암종별 특징을 살펴보았을 때 화강암질암의 지하수 시료는 $Ca^{2＋}$-HCO$_3$$^{-}$의 유형을 거쳐 $Na^{＋}$-HCO$_3$$^{-}$ 유형까지 진화하였으나 변성퇴적암과 퇴적암내의 지하수 시료는 $Ca^{2＋}$-HCO$_3$$^{-}$의 유형에 머물러 있다. 이는 구성 광물 중 사장석의 용해가 화강암질암내 지하수의 특성을 조절하고 있는 반면 변성퇴적암과 퇴적암내 지하수 시료에서는 방해석의 용해만이 주된 반응으로 작용하고 있기 때문이다. 또한 심도별 특징을 살펴보았을 때 지표수에서 심부지하수로 이동하면서 수소이온농도, 전기전도도 및 대부분의 용존이온 함량은 증가하고 있다. 한편 일부 천부지하수시료에서는 NO$_3$$^{-}$ , Cl$^{-}$ 및 $K^{＋}$의 함량 및 K/Na의 비가 높게 나타나는 것으로 보아 농업활동으로 인한 오염의 영향을 받은 것으로 판단된다. 열역학적 고찰을 통해 볼 때 대부분의 자연수는 kaolinite 및 smectite 형성환경에 위치하고 있음을 알 수 있으며 질량보존을 기초로 한 반응모델을 설정한 결과, 용존이온의 거동 및 열역학적 연구 결과와 부합하는 결과를 얻을 수 있었다.

• Journal of Nutrition and Health
• /
• 제19권6호
• /
• pp.363-373
• /
• 1986

This study was devised to elucidate whether soused shrimp exhibits a digestive action on boiled pork meats. and the mechanism by which sousing with a high concentration of sodium chloride preserves nutrients in foods for a prolonged pe\ulcornerriod. Protease was isolated from soused shrimp using a combination of ammonium sulfate fractionation. DEAE - cellulose ion exchange chromatography and gel filtra\ulcornertion. The isolated protease had specific activity of 1.560 units. 210 purification fo\ulcornerld with an yield of 38%. Its optimum pH and temperature were 8.0 and $43^{\circ}C$ respectively. The molecular weight of the enzyme was 35.000. The Km value of the enzyme for casein was 1.6 x $10^{-6}$ M The e=yme required the presence of cu\ulcornerpric ion to exhibit its full activity. Eighty eight percent of the enzyme activity was in\ulcornerhibited by 3.5M NaCI showing a reversibly linear decrease of the enzyme activity as NaCI concentration increased. The nature of the inhibition by NaCl was rever\ulcornersible and noncompetitive. The protease activity in soused shrimp was well preser\ulcornerved with the elapse of time at least in part due to NaCI induced suppression of autodigestion. The enzyme was denatured by acid easily. i.e. 1% of the original activity remained after staying at pH 2 for 10 minutes. which is within the norm\ulcorneral range of pH of the human stomach. Soused shrimp was observed to be one of those containing the highest protease activity compared with the other soused foo\ulcornerds such as soused oyster. squid. clam. and Pollack intestine with respect to spec\ulcornerific activities of dialized 1:4 whole homogenates(w/v) in 5 mM sodium phospha\ulcornerte - 2.4 mM j3 - mercaptoethanol buffer. pH 8.0. Casein and boiled meats including pork, beef, and chicken appeared to be the good substrates for the protease. Casein was the best. Therefore. the ingestion of boiled meats including pork together with soused sh\ulcornerrimp would help digestion of boiled pork in human not only by increasing appe\ulcornertite also by the direct proteolytic digestion of boiled meats by soused shrimp to\ulcorner some extent. And a high concentration of sodium chloride inhibited the protease activity reversibly in a remarkable degree, which ensued in a significant retardat\ulcornerion of autodigestion of protein in foods by proteases, and hereby contributed to the preservation of foods for an extended period.

• 한국토양비료학회지
• /
• 제44권4호
• /
• pp.591-596
• /
• 2011

The applications of chemical fertilizers and various types of organic materials may cause heavy metal accumulation in soil. In this study, we conducted to investigate the relationship between the different chemical forms of heavy metals such as Cr, Cd, Pb, Cu, Ni, and Zn retained in soil and the metal concentrations in Korean raspberry plant. Forty five soil samples were collected from 2 to 6 years old Korean raspberry cultivation fields (RCFs), Gochang, Korea, to determine total, exchangeable (1.0 M $MgCl_2$-extractable), DTPA-extractable metal contents. The leaves and fruits of raspberry plant were sampled at harvest stage. Total metal contents in soils ranged from $0.87mg\;kg^{-1}$ to $66.82mg\;kg^{-1}$. Exchangeable and DTPA-extractable metals ranged between 0.02 and $0.67mg\;kg^{-1}$ and between $0.05mg\;kg^{-1}$ and $7.07mg\;kg^{-1}$, respectively. The metal concentrations in the plant leaf and fruit determined on a dry-basis were between $1.30mg\;kg^{-1}$ and $38.82mg\;kg^{-1}$ and between $0.05mg\;kg^{-1}$ and $21.51mg\;kg^{-1}$, respectively, but Cd and Pb were not detected in the leaf. The total, exchangeable, and DTPA-extractable contents of the metal ions in soil were directly correlated one another, but the contents of different metals in the different fractions were inversely correlated in general. Most of total and DTPA-extractable metals in the soil were directly correlated with the contents of the same metals in the plant, whereas exchangeable metals in the soil were not statistically correlated with the same metals in plants. Thus, we concluded that the metal contents in the raspberry field soils were much lower thanthe levels of Soil Contamination Warning Standard (SCWS), and the plant metal concentrations were also less than the maximum permissible limits. The total and DTPA-extractable metals in the soil were closely related to the metal concentrations in the plant.

• 생명과학회지
• /
• 제18권8호
• /
• pp.1106-1114
• /
• 2008

건조방법(천일, 열풍 및 동결건조)을 달리한 와송의 물과 95% 에탄올추출물이 지질과산화 억제에 미치는 영향과 대두유와 돈지에 첨가되었을 때 자동산화와 가열산화 조건에서 항산화능을 평가하였다. Linoleic acid 기질에서 지질과산화 억제능은 모든 시료에서 저장기간이 길어질수록 상승하였으며, 물추출물보다 에탄올추출물에서 더 효과적이었다. 건조방법에 따라서는 열풍건조＞동결건조＞천일건조 순으로 유의적인 차이를 보였다. $FeCl_2$ 및 $CuSO_4$ 첨가시 열풍건조 시료의 에탄올추출물에서 지질과산화 억제능이 가장 높았다. 열풍건조 와송의 에탄올추출물을 대두유 및 돈지에 0.1, 0.5 및 1.0 g/100 g으로 첨가하여 $60^{\circ}C$(28일)와 $180^{\circ}C$(48시간)에서 저장하였다. $60^{\circ}C$에서 저장할 경우 산가는 저장기간 동안 대두유가 대조구보다 낮았으며, 돈지의 경우 저장초기에는 높았으나, 저장 28일 후에는 대조구 및 BHT 첨가구보다 낮은 값이었다. 아니시딘가 및 과산화물가도 대조구 및 BHT 첨가구보다는 낮은 값을 보였다. $180^{\circ}C$에서 가열 저장한 경우에도 이와 유사한 경향이었다. TBA가는 $60^{\circ}C$저장시 저장기간이 경과함에 따라 대두유에서 상승되었으나, 시료량이 많을수록 증가폭은 적었다. $180^{\circ}C$에 저장한 경우에는 36시간 후에 돈지에서 시료량이 많을수록 유의적인 감소를 보였다. 따라서 열풍건조 와송의 에탄올추출물은 지질을 함유한 식품에 항산화제로 적용될 경우 저장기간 및 가열시간에 따른 유지의 산화억제에 유효할 것으로 기대된다.

• 한국환경농학회지
• /
• 제20권4호
• /
• pp.252-257
• /
• 2001

만경강 상류 유역의 수질 오염 실태를 조사한 결과 요약하면 다음과 같다. 3월부터 8월 사이의 수온은 $6.4{\sim}30.8^{\circ}C$로 나타나, 기온에 영향을 받았지만 수심과 유속에도 크게 영향을 받은 것으로 조사되었다. 수질의 pH는 $5.9{\sim}9.7$ 범위었으며 용존산소량 (DO)은 4.60, 생물학적 산소요구량 (BOD)은 $0.1{\sim}11.8\;mg/L$이었다. 수질중 질소원의 검출량은 전질소함량이 $1.19{\sim}10.61\;mg/L$, $NO_3-N$은 $1.0{\sim}5.93\;mg/L$, $NH_4-N$은 $ND{\sim}2.79\;mg/L$이었다. 전인의 함량은 $ND{\sim}1.14\;mg/L$, 염소이온함량은 $3.5{\sim}196.4\;mg/L$로 나타났다. Fe와 Mn의 검출량은 각각 $0.002{\sim}0.100\;mg/L$, $ND{\sim}0.04\;mg/L$이었다. Cd 검출량은 $ND{\sim}0.03\;mg/L$, Cu의 검출량은 $ND{\sim}0.05\;mg/L$, Zn은 $0.001{\sim}0.17\;mg/L$로 나타났으나, Pb은 전체시료에서 검출한계 이하이었다. 수질 분석 항목중 상당수의 시료가 기준치를 초과한 항목은 pH, T-N, T-P이었으며 전체적인 오염 상태는 갈수기인 6월의 경우가 8월보다 높았으며 갈수기의 경우에는 지역별로 물의 이동이 거의 없었기에 지역에 따라 수질의 오염상태가 현저히 달랐으며 지역별로는 오염정도가 가장 높았던 지역은 공장폐수가 많이 유입되는 삼례교유역의 수질로 나타났다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권6호
• /
• pp.56-66
• /
• 2016

Generally, the contribution of crop-intake pathway (CIP) is remarkable in human health assessment (HHA) of heavy metal contamination. Although the crop exposure concentrations (Cp) should directly be used for calculating the average daily dose (ADD) of CIP, the soil exposure concentration (Cs) multiplied by soil-crop bio-concentration factor (BCF) has frequently been used instead of using Cp values. Thus, the BCF values are significant in the HHA, and care should be taken to ensure the reasonable acquisition of BCF values. Meanwhile, the BCF values are known to be significantly affected by analytical methods. Nevertheless, they have been calculated from the concentrations of soil and crop analyzed by only one method: total digestion (aqua regia extraction). For this reason, this study was initiated to seek appropriate soil analysis methods for effective computation of the ADD of CIP. The concentrations of 5 metal contaminants (As, Cd, Cu, Pb, and Zn) in 127 soil samples obtained from 4 abandoned metal mine areas were analyzed by several methods including total digestion and partial digestions using 0.1/1 N HCl, 1M $NH_4NO_3$, 0.1 M $NaNO_3$, and 0.01M $CaCl_2$. The heavy metal concentrations in 127 crop samples (rice grains) were analyzed by total digestion as well. Using the concentrations of soils and crops, the BCF values of each contaminant were calculated according to the kind of soil extraction methods applied. Finally, the errors between Cp and $C_s{\times}BCF$ were computed to evaluate the relevance of each method. The results indicate that the partial extraction using 0.1 N and 1 N HCl was superior or equivalent to total digestion. In addition, the 0.1M $NaNO_3$ method combined with total digestion is recommended for improving the reliability of BCF values.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.24-24
• /
• 1998

반도체장비를 포함하는 초고진공장비의 園훌化가 급속히 그리고 절실히 요구되고 있는 것이 현실정이다. 當面해서 실현할 국산진공장비의 대상은 廣範圍하다. 즉, 각종 진공 pump ( (rotary, dry, diffusion, cryo, ion, turbo melecular pump), 진공 chamber, 진공 line, gate valve 를 위 시 한 진공 V머ve, flange, gasket, fl않d야lU, mainpulater 퉁 진공 部品이 다. 진공계 의 핵심 은 適切하고 優良한 진공재료의 선태파 사용이다. 진공장비는 사용자가 원하는 진공도를 원하 는 시간 동안 륨空度를 유지해 주어야 한다. 진공재료 선태의 기준사항은:(1) 기체의 透過성 (2) 薰했훌 (3) 혔體放出특성 - -outgassing과 degassing- (4) 機械的 량훌度 (5) 온도 의존성 (6) 化學톡성 (7) 加I성 및 鎔接 성 (8) 課電특성 (9) 磁氣특성 (10) 高速함子 및 放射線 특성 (11) 經濟성 및 調達생 둥이 다. 우량한 초고진공계재료는 풍부하게 개발되어 왔고, 또 新材料들이 개발되고 있다. 여기에서는 주로 초고진공 내지는 극고진공계의 構造材料, 機能材料, 部品材料 일반파 몇가지 신재료의 특 성에 관해서 記述한다. M Mild SteeHSAE, 1112, 1010, 1020, 1022, etc)., S Stainless SteeHAlSI, 304, 304L, 310, 316, 321, 347): 구조재료, chamber, fl하1ges A Aluminum과 Alloys (1060, 1100, 2014, 4032, 6(뻐1): 구조재료, chamber, flanges, gaskets A AI, Al 떠loy는 SS에 代替하는 역 할올 시 작하고 있다. C Copper, Copper Alloys(C11$\alpha$)0, C26800, C61400, Cl7200): 내장인자, gasket, cryopanel, tubing T Titanium, Ziriconium, Haf띠um 및 Alloys: 특히 Ti은 10n pump 용 getter material 이 외 에 U UHV,XHV용 chamber계로서 관심올 끌고 있다. N Nickel, Nickel Alloys (200, 204, 211, monel, nichrome): 부식 방지 , 전자장치 , 자기 장치 귀 금속(Ag, Au, Pt, Pd, Rh, Ir, Os, Ru): 보조부품, gasket, filament, coating, thermocouple, 접 합부위 T TiC, SiC, zrC, HfC, TaC 둥의 탄화물과, BN, TiN, AlN 동의 질화물, 붕화물이 둥장하고 었 다. 유리: Soda Lime, Borosilicate, Potash Soda Lead: View Port, Chamber envelope C Ceramics: AlZ03, BeO, MgO, zrOz, SiOz, MgOzSiOz, 3Alz032SiOz, Z$textsc{k}$hSiOz S상N4: e electrical, thermal insulators, crucibles, boats, single crystals, sepctr려 windows 저자는 최근 저자들이 발견한 Zr-Ti-Cu-Ni-Be amorphous alloys coated cham뾰r가 radiation p proof로 이용될 수 있는 사실을 점검하고 었다 .. Z.Y. Hua 들은 Cs3Sb를 새로운 photocathode 재료로 보고하고 있다.