• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.185-190
• /
• 2001

Alginate, a well-known biopolymer, is universally applied for immobilization of microbial cells. Biosorption characteristics of lead by waste biomass of immobilized A. niger beads, used in fermentation industries to produce citric acid, were studied. The immobilized A. niger beads, prepared via capillary extrusion method using calcium chloride, were applied in the removal of lead. Pb uptake was the highest in A. niger beads cells grown for 3 days with medium producing citric acid (12% sucrose, 0.5% $NH_4NO_3$, 0.1% $KH_2PO_4$, and 0.025% $MgSO_4$). Lead uptake by the immobilized A. niger beads and free A. niger mycellia beads increased sharply with time. However, while uptake by the immobilized A. niger beads continued to increase slowly, that by free A. niger mycellia beads stopped after 30 min. The optimum pH and temperature of lead uptake were found to be 6 and $35^{\circ}C$, respectively. The maximum uptake of lead was achieved with $50{\sim}100$ beads and 50 ml lead solution in a 250-ml Erlenmeyer flask, while, at over 100 beads, uptake of the lead decreased. The order of biosorption capacity for heavy metals was Pb>Cu>Cd. Pb uptake capacity of the immobilized A. niger beads treated with 0.1 M $CaCI_2$, 0.1 M NaOH, and 0.1 M KOH decreased compared to the untreated beads. On testing the desorption of Pb from the immobilized A. niger beads, re-uptake of Pb was found possible after desorption of the binding metal with 0.1 M HCI.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.293-301
• /
• 2005

We conducted several different leaching experiments for assessing the potential environmental risk when utilizing recycled concrete for stabilizing bridge pier. The methods include continuous batch leaching test (DIN 38414-S4), availability test (NEN 7341), pH-stat test (CEN/TC 292/WG6) and tank diffusion test (NEN 7345). The concentration ranges vary depending on the testing method. Nearly all the trace elements were low, some elements recording under detection limit. The maximum concentrations for trace elements leached throughout the whole tests are (as mg/L); Cd (0.029), Cu (0.437), Pb (0.14), Ni, Zn (0.95), Hg (0.005). Although the testing methods we used in this study are much more rigorous than other commonly adapted method including TCLP and domestic testing method for solid waste, the trace elemental concentrations are under the criteria for hazardous material set by the TCLP and domestic method. The result seems to suggest that applying the recycled concrete on stream water will be accepatable practice as for as trace elements are concerned. However, the influence of inorganics such as Ca, Mg, Ni and $SO_4^{2-}$ on aquatic ecology should be further examined.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.2
• /
• pp.79-93
• /
• 1991

With the advent of ULSI, many problems in previous metallization techniques and interconnection materials have become more serious. In this work, selective deposition of copper to fill the submicron contact has been tried. After forming electro-deposited copper films on p-type (100) silicon wafer using 0.75M $CuSO_4{\cdot}$5H_2O$ as an electrolyte, the effect of deposition time, current density and concentration of an additive on film properties were investigated. Film thickness, particle size and resistivity were analyzed by Alpha Step, SEM and 4 - point probe measurement respectively. The deposition rate was about $0.5-0.6\mu\textrm{m}$/min at $2A/dm^2$ and the particle size increased with increasing current density. The resistivities of electro-deposited copper films were about $3-6{\mu}{\Omega}{\cdot}$cm for the particle size above $4000{\AA}$. By the addition of 0.2 g/l gelatin, the particle size was reduced to less than $0.1{\mu}m $ and selective plugging of copper on submicron contacts could be successfully achieved.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.33-41
• /
• 2016

A scale up tests (380 kg/day) using a continuous solvent extraction and electro-winning system was carried out to separate and recover cobalt from a solution containing 1.91 g/L Co and 14.65 g/L Ni. The solution was obtained during a process including solvent extraction and precipitation stages for removal of Cu and Fe from a synthetic sulfuric acid solution of manganese nodule matte. The optimal condition for solvent extraction was : solvent concentration of 0.22M Na-Cyanex 272 (45% saponified with NaOH) and O:A phase ratios of 1:1.5, 10:1 and 1.5:1 used in extraction, scrubbing and stripping stages, respectively. The extraction and stripping efficiencies were found to be 99.8% and 99.88%, respectively. The stripped solution contained 40.27 g/L Co with 4 ppm Ni. Cobalt metal of 99.963% purity was yielded with current efficiency of 67% and current density of $0.563A/dm^2$ during the electro-winning process.

• Journal of Korean Physical Therapy Science
• /
• v.13 no.4
• /
• pp.43-62
• /
• 2006

The survey was conducted with participation of the 289 handicapped persons residing at the rural area OOeup-gun in Kyungbook for the period of March 2 - May 31, 2006, to study the nature in general of the handicapped and the boundaries of their need. For the nature in general of the handicapped, the study was done by gender iscrimination, age, marital status, religion, educational level, occupation, monthly income, disability cause, disabled duration, disability type, disability level. For the boundaries of their need, the study was done by demand of financial support, educational demand, demand of voluntary workers, need of rehabilitation and medical treatment, job training, improvement of living conditions, or so. Using the Win.SPSS program, we made a frequency analysis and conclusions on the nature in general of the handicapped and the boundaries of their need on a 2-test. Conclusions are : 1. Nature in general of the handicapped The existence of the handicapped shows high at the age over 51 (71.6%), male-handicapped (65.1%), primary school graduates (62.9%), farming engaging (65.2%), monthly income less than one million Won (80.5%), cause by disease (53.8%), duration more than 10 years (61.6%), disability at level 3 (39.8%), extremity disability (66.4%). 2. Correlation of nature in general with demand of the handicapped a. In demanding the financial support, support for helper’s compensation shows high (p<0.05). In demanding the necessity of voluntary workers, the male-handicapped appears high during the absence of family assistance and the female-handicapped appears differently per week and also appears high during the absence of family assistance (p<0.05). b. In educational demand of the handicapped by their age, the age below 30 demands technical-job training and the age over 31 demands medical education for health care (p<0.01). c. In demanding the financial support by educational level, support for living cost shows high (p<0.05). d. In demanding improvement of living conditions by postnatal cause of disability, improvement of house structure shows high (p<0.05). e. In demanding assistance of voluntary workers by disabled duration, "No Need" shows high in the disabled duration more than 4 years (p<0.05). f. In demanding rehabilitation and medical treatment by disability type, home-visiting treatment, oriental medical treatment and physical therapy show high (p<0.001). g. In educational demand by disability level, medical education for health care shows high (p<0.01).

• Journal of Wetlands Research
• /
• v.17 no.4
• /
• pp.325-331
• /
• 2015

Due to urbanization and increase in impervious area, changes in natural water circulation system have become a cause of groundwater recharge reduction, streamflow depletion and other hydrological problems. Therefore, this study developed the infiltration planter techniques applied in an LID facility treating roof stormwater runoff such as, performance of small decentralized retention and infiltration through the reproduction of natural water circulation system and use of landscape for cleaning water. Assessment of an infiltration planter was performed through rainfall monitoring to analyze the water balance and pollutant removal efficiency. Hydrologic assessment of an infiltration planter, showed a delay in time of effluent for roof runoff for about 3 hours and on average, 79% of facilities had a runoff reduction through retention and infiltration. Based on the analysis, pollutant removal efficiency generated in the catchment area showed an average of 97% for the particulate matter, 94% for the organic matter and 86-96% and 92-93% for the nutrients and heavy metals were treated, respectively. Comparative results with other LID facilities were made. For this study, facilities compared the SA/CA to high pollutant removal efficiency for the determination to of the effectiveness of the facility when applied in an urban area.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.3
• /
• pp.211-223
• /
• 2001

Background : Rhinovirus infection of the airways results in increased permeability of the airway vascular endothelium with the influx of plasma proteins, including lipids such as LDL. In vitro studies on the effect of oxLDL on leukocytes has shown many pro inflammatory effects on multiple leukocytes. We hypothesized that oxLDL is one mechanism for recruiting granulocytes to the airways during a RV infection. Therefore, chemotaxis and transendothelial migration, in response to nLDL, was determined for these granulocytes. Methods : nLDL was oxidized with 5mM Cu2S04 for 20-24 hours. 3-5 105 cells were loaded into the Transwell filter while the chemotatic agonists were placed in the lower well for chemotaxis. Confluent monolayers on HPMEC were grown on Transwell filters for transendothelial migration. The filters were washed and eosinophils and neutrophils loaded on to the filter with the chemotatic agonist was were placed in the lower well. The wells were incubated for 3 hours. The number of migrating cells was counted on a hemocytometer. Results : OxLDL, but not nLDL, is chemotatic for eosinophils and neutrophils. The level of granulocytes chemotaxis was dependent on both the concentration of LDL and its degree of oxidation. OxLDL stimulates eosinophil and neutrophils migration across HPMEC monolayers (+/-IL-$1{\beta}$ preactivation) in a dose dependent manner. Conclusion : Increased vascular permeability during a RV infection may lead to the influx and oxidation of LDL. The resulting oxLDL. is one possible mechanism for the recruitment of neutrophils and eosinophils to the airway interstitial matrix. Once in the airways, granulocytes can further interact with oxLDL to promote airway inflammation.

• Journal of Life Science
• /
• v.18 no.8
• /
• pp.1106-1114
• /
• 2008

The antioxidants activities in water and 95% ethanol extracts of wa-song (Orostachys japonicus A. Berger) dried by sun, hot air and lyophilization were measured in vitro reaction system. In reaction system containing linoleic acid, the antioxidant activities against lipid oxidation enhanced in proportion to storage time. The antioxidant activity of ethanol extracts was higher than that of water extracts. In the drying methods, wa-song extracts showed higher antioxidant activity in the other of hot air-dried, lyophilized and sun-dried. The lipid oxidation system containing the promoting factors, such as $Fe^{+2}$ and $Cu^{+2}$ions, also showed that the ethanol extract of hot air-dried wa-song possessed the highest antioxidant activity. Soybean oil and lard being added with various levels (0.1, 0.5 and 1.0 g/100 g) of the ethanol extract of hot air-dried wa-song were stored at $60^{\circ}C$ (for 28 days) or $180^{\circ}C$ (for 48 hr). Its extract appeared to lower the acid value of soybean oil, wheras it failed to lower the acid value for lard at early storage time, but it was lower than control and BHT after 28 days. Anicidine value and peroxide value were lower soybean and lard added wa-song extract than control and BHT for storage for 28 days at $60^{\circ}C$. In 28 days, its value was significantly decreased in proportion to sample concentration. TBA value was increased during storage time at $60^{\circ}C$, but it was significantly decreased by sample concentration after storage 36 hours at $180^{\circ}C$ storage. Therefore results suggest ethanol extract of hot air-dried wa-song could be potential candidates for natural antioxidants for materials containing lipid.

• Economic and Environmental Geology
• /
• v.28 no.2
• /
• pp.109-121
• /
• 1995

The hydrothermal vein type deposits which comprise the Kasihan, Jompong and Gempol mineralized areas are primarily copper and zinc deposits, but they are also associated with lead and/or gold mineralization. The deposits occur within the Tertiary sedimentary and volcanic rocks in the Southern Mountain zone of the eastern Java island, Indonesia. Mineralization can be separated into two or three distinct stages (pre-and/or post- ore mineralization stages and main ore mineralization stage) which took place mainly along pre-existing fault breccia zones. The main phase of mineralization (the main ore stage) can be usually classified into three substages (early, middle and late) according to ore mineral assemblages, paragenesis, textures and their chemical compositions. Ore mineralogy and paragenesis of the three areas in the district are different from each other. Pyrite, pyrrhotite (/arsenopyrite), iron-rich (up to 20.5 mole % FeS) sphalerite and (Cu-)Pb-Bi sulfosalts are characteristic of the deposits in the Kasihan (/Jompong) area. On the other hand, pyrite + hematite + magnetite + iron-poor (2.7 to 3.6 mole % FeS) sphalerite assemblage is restricted to the Gempol area. Fluid inclusion data suggest that fluids of the main ore stage evolved from initial high temperatures (near $350^{\circ}C$) to later lower temperatures (near $200^{\circ}C$) with salinities ranging from 0.8 to 10.1 equiv. wt. percent NaCl. Each area represents a separate hydrothermal system: the mineralization at Kasihan and Jompong were largely due to early fluid boiling coupled with later cooling and dilution, whereas the mineralization at Gempol was mainly resulted from cooling and dilution by an influx of cooler meteoric waters. Fluid inclusion evidence of boiling indicates that pressures of ${\geq}95$ to 255 bars (${\geq}95$ bars for the Gempol area: $\approx$ 120 to 170 bars for the Jompong area: $\approx$ 140 to 255 bars for the Kasihan area) during portions of main ore stage mineralization. Equilibrium thermodynamic interpretation indicates that the evolution trends of the temperature versus fS2 variation of ore stage fluids in the Pacitan district follow two fashions: ore fluids at Kasihan and Jompong changed from the pyrite-pyrrhotite sulfidation stage towards pyritehematite- magnetite state, whereas those at Gempol evolved nearly along pyrite-hematite-magnetite reaction curve with decreasing temperature. The sulfur isotope compositions of sulfide minerals are consistent with an igneous source of sulfur with a ${\delta}^{34}S_{{\Sigma}s}$ value of about 3.3 per mil. The oxygen and hydrogen isotopic compositions of the fluids in each area indicate a progressive shift from the dominance of highly exchanged meteoric water at early hydrothermal systems towards an un- or less-exchanged meteoric water at later hydrothermal systems.